Environmental data management in the Sado Estuary

Estuaries are perhaps the most threatened environments in the coastal fringe; the coincidence of high natural value and attractiveness for human use has led to conflicts between conservation and development. These conflicts occur in the Sado Estuary since its location is near the industrialised zone of Peninsula of Setúbal and at the same time, a great part of the Estuary is classified as a Natural Reserve due to its high biodiversity. These facts led us to the need of implementing a model of environmental management and quality assessment, based on methodologies that enable the assessment of the Sado Estuary quality and evaluation of the human pressures in the estuary. These methodologies are based on indicators that can better depict the state of the environment and not necessarily all that could be measured or analysed. Sediments have always been considered as an important temporary source of some compounds or a sink for other type of materials or an interface where a great diversity of biogeochemical transformations occur. For all this they are of great importance in the formulation of coastal management system. Many authors have been using sediments to monitor aquatic contamination, showing great advantages when compared to the sampling of the traditional water column. The main objective of this thesis was to develop an estuary environmental management framework applied to Sado Estuary using the DPSIR Model (EMMSado), including data collection, data processing and data analysis. The support infrastructure of EMMSado were a set of spatially contiguous and homogeneous regions of sediment structure (management units). The environmental quality of the estuary was assessed through the sediment quality assessment and integrated in a preliminary stage with the human pressure for development. Besides the earlier explained advantages, studying the quality of the estuary mainly based on the indicators and indexes of the sediment compartment also turns this methodology easier, faster and human and financial resource saving. These are essential factors to an efficient environmental management of coastal areas. Data management, visualization, processing and analysis was obtained through the combined use of indicators and indices, sampling optimization techniques, Geographical Information Systems, remote sensing, statistics for spatial data, Global Positioning Systems and best expert judgments. As a global conclusion, from the nineteen management units delineated and analyzed three showed no ecological risk (18.5 % of the study area). The areas of more concern (5.6 % of the study area) are located in the North Channel and are under strong human pressure mainly due to industrial activities. These areas have also low hydrodynamics and are, thus associated with high levels of deposition. In particular the areas near Lisnave and Eurominas industries can also accumulate the contamination coming from Águas de Moura Channel, since particles coming from that channel can settle down in that area due to residual flow. In these areas the contaminants of concern, from those analyzed, are the heavy metals and metalloids (Cd, Cu, Zn and As exceeded the PEL guidelines) and the pesticides BHC isomers, heptachlor, isodrin, DDT and metabolits, endosulfan and endrin. In the remain management units (76 % of the study area) there is a moderate impact potential of occurrence of adverse ecological effects and in some of these areas no stress agents could be identified. This emphasizes the need for further research, since unmeasured chemicals may be causing or contributing to these adverse effects. Special attention must be taken to the units with moderate impact potential of occurrence of adverse ecological effects, located inside the natural reserve. Non-point source pollution coming from agriculture and aquaculture activities also seem to contribute with important pollution load into the estuary entering from Águas de Moura Channel. This pressure is expressed in a moderate impact potential for ecological risk existent in the areas near the entrance of this Channel. Pressures may also came from Alcácer Channel although they were not quantified in this study. The management framework presented here, including all the methodological tools may be applied and tested in other estuarine ecosystems, which will also allow a comparison between estuarine ecosystems in other parts of the globe.

Location model for CCA-treated - wood waste remediation units

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Assessing the balance between biodiversity conservation and coastal and estuarine management of the Sado Estuary Natural Reserve, Portugal, using BIO-SAFE

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, perfil de Engenharia Ecológica

Control in distribution networks with demand side management

The way in which electricity networks operate is going through a period of significant change. Renewable generation technologies are having a growing presence and increasing penetrations of generation that are being connected at distribution level. Unfortunately, a renewable energy source is most of the time intermittent and needs to be forecasted. Current trends in Smart grids foresee the accommodation of a variety of distributed generation sources including intermittent renewable sources. It is also expected that smart grids will include demand management resources, widespread communications and control technologies required to use demand response are needed to help the maintenance in supply-demand balance in electricity systems. Consequently, smart household appliances with controllable loads will be likely a common presence in our homes. Thus, new control techniques are requested to manage the loads and achieve all the potential energy present in intermittent energy sources. This thesis is focused on the development of a demand side management control method in a distributed network, aiming the creation of greater flexibility in demand and better ease the integration of renewable technologies. In particular, this work presents a novel multi-agent model-based predictive control method to manage distributed energy systems from the demand side, in presence of limited energy sources with fluctuating output and with energy storage in house-hold or car batteries. Specifically, here is presented a solution for thermal comfort which manages a limited shared energy resource via a demand side management perspective, using an integrated approach which also involves a power price auction and an appliance loads allocation scheme. The control is applied individually to a set of Thermal Control Areas, demand units, where the objective is to minimize the energy usage and not exceed the limited and shared energy resource, while simultaneously indoor temperatures are maintained within a comfort frame. Thermal Control Areas are overall thermodynamically connected in the distributed environment and also coupled by energy related constraints. The energy split is performed based on a fixed sequential order established from a previous completed auction wherein the bids are made by each Thermal Control Area, acting as demand side management agents, based on the daily energy price. The developed solutions are explained with algorithms and are applied to different scenarios, being the results explanatory of the benefits of the proposed approaches.

The use of information and interactive processes in growth management

Tese de doutoramento em Engenharia do Ambiente, especialidade em Sistemas Sociais

Pattern operators for grid

The definition and programming of distributed applications has become a major research issue due to the increasing availability of (large scale) distributed platforms and the requirements posed by the economical globalization. However, such a task requires a huge effort due to the complexity of the distributed environments: large amount of users may communicate and share information across different authority domains; moreover, the “execution environment” or “computations” are dynamic since the number of users and the computational infrastructure change in time. Grid environments, in particular, promise to be an answer to deal with such complexity, by providing high performance execution support to large amount of users, and resource sharing across different organizations. Nevertheless, programming in Grid environments is still a difficult task. There is a lack of high level programming paradigms and support tools that may guide the application developer and allow reusability of state-of-the-art solutions. Specifically, the main goal of the work presented in this thesis is to contribute to the simplification of the development cycle of applications for Grid environments by bringing structure and flexibility to three stages of that cycle through a commonmodel. The stages are: the design phase, the execution phase, and the reconfiguration phase. The common model is based on the manipulation of patterns through pattern operators, and the division of both patterns and operators into two categories, namely structural and behavioural. Moreover, both structural and behavioural patterns are first class entities at each of the aforesaid stages. At the design phase, patterns can be manipulated like other first class entities such as components. This allows a more structured way to build applications by reusing and composing state-of-the-art patterns. At the execution phase, patterns are units of execution control: it is possible, for example, to start or stop and to resume the execution of a pattern as a single entity. At the reconfiguration phase, patterns can also be manipulated as single entities with the additional advantage that it is possible to perform a structural reconfiguration while keeping some of the behavioural constraints, and vice-versa. For example, it is possible to replace a behavioural pattern, which was applied to some structural pattern, with another behavioural pattern. In this thesis, besides the proposal of the methodology for distributed application development, as sketched above, a definition of a relevant set of pattern operators was made. The methodology and the expressivity of the pattern operators were assessed through the development of several representative distributed applications. To support this validation, a prototype was designed and implemented, encompassing some relevant patterns and a significant part of the patterns operators defined. This prototype was based in the Triana environment; Triana supports the development and deployment of distributed applications in the Grid through a dataflow-based programming model. Additionally, this thesis also presents the analysis of a mapping of some operators for execution control onto the Distributed Resource Management Application API (DRMAA). This assessment confirmed the suitability of the proposed model, as well as the generality and flexibility of the defined pattern operators

Fisheries Safety Management

Fisheries is one of the most dangerous professions in the world. Fatal accidents and injuries in the fisheries are characterized as well as particular circumstances that may cause or aggravate the risk of accidents. Aspects of safety management of fishing vessels are covered in this paper: areas of concern when doing a risk assessment in fishing vessels, fundamental elements on a safety management system for the fisheries and the need for international and national level instruments as well as legal and compulsory measures

Democratic dialogue and collective learning in the context of self-managed teams

This paper provides a longitudinal, empirical view of the multifaceted and reciprocal processes of organizational learning in a context of self-managed teams. Organizational learning is seen as a social construction between people and actions in a work setting. The notion of learning as situated (Brown & Duguid 1989, Lave& Wenger 1991, Gherardi & al. 1998, Easterby-Smith & Araujo 1999, Abma 2003) opens up the possibility for placing the focus of research on learning in the community rather than in individual learning processes. Further, in studying processes in their social context, we cannot avoid taking power relations into consideration (Contu & Willmott 2003). The study is based on an action research with a methodology close to the ‘democratic dialogue’ presented by Gustavsen (2001). This gives a ground for research into how the learning discourse developed in the case study organization over a period of 5 years, during which time the company abandoned a middle management level of hierarchy and the teams had to figure out how to work as self-managed units. This paper discusses the (re)construction of power relations and its role in organizational learning. Power relations are discussed both in vertical and horizontal work relations. A special emphasis is placed on the dialectic between managerial aims and the space for reflection on the side of employees. I argue that learning is crucial in the search for the limits for empowerment and that these limits are negotiated both in actions and speech. This study unfolds a purpose-oriented learning process, constructing an open dialogue, and describes a favourable context for creative, knowledge building communities.

Management Structure and Work Team Processes; Responsibilities and Responsiveness

This paper explores the management structure of the team-based organization. First it provides a theoretical model of structures and processes of work teams. The structure determines the team’s responsibilities in terms of authority and expertise about specific regulation tasks. The responsiveness of teams to these responsibilities are the processes of teamwork, in terms of three dimensions, indicating to what extent teams indeed use the space provided to them. The research question that this paper addresses is to what extent the position of responsibilities in the team-based organization affect team responsiveness. This is done by two hypotheses. First, the effect of the so-called proximity of regulation tasks is tested. It is expected that the responsibility for tasks positioned higher in the organization (i.e. further from the team) generally has a negative effect on team responsiveness, whereas tasks positioned lower in the organization (i.e. closer to the team) will have a positive effect on the way in which teams respond. Second, the relationship between the number of tasks for which the team is responsible with team responsiveness is tested. Theory suggests that teams being responsible for a larger number of tasks perform better, i.e. show higher responsiveness. These hypotheses are tested by a study of 109 production teams in the automotive industry. The results show that, as the theory predicts, increasing numbers of responsibilities have positive effects on team responsiveness. However, the delegation of expertise to teams seems to be the most important predictor of responsiveness. Also, not all regulation tasks show to have effects on team responsiveness. Most tasks do not show to have any significant effect at all. A number of tasks affects team responsiveness positively, when their responsibility is positioned lower in the organization, but also a number of tasks affects team responsiveness positively when located higher in the organization, i.e. further from the teams in the production. The results indicate that more attention can be paid to the distribution of responsibilities, in particular expertise, to teams. Indeed delegating more expertise improve team responsiveness, however some tasks might be located better at higher organizational levels, indicating that there are limitations to what responsibilities teams can handle.

Concept of Customer Relationship Management as an example of innovation in banking sector

Banks that has introduced CRM system, had to make some difficult changes in their organization in order to become more customer oriented. Beside the pure CRM banks try to adopt other innovative tools related with the core CRM. Some of these solutions are constructed in such a way so that ensured could be also access to the information beside to bank’s organization.

Noise management at work

Every single day millions of European workers are exposed to noise at work. One in five of European’s workers have to raise his voice to be heard for at least half of the time that there are at work and 7% suffer from work-related hearing impairment. In Europe noise-induced hearing loss is the most common reported occupational disease. This paper deals with issues related with noise management at work, especially regarding the compliance with the new noise European Directive, (2003/10/EC).

Information technology service management: an experimental approach towards IT service prediction

Dissertation presented to obtain a Masters degree in Computer Science

Risk management of new product development process

Dissertation submitted to Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa for the achievement of Integrated Master´s degree in Industrial Management Engineering

Web GIS to support irrigation management: a prototype for SAGRA network, Alentejo Portugal

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

A gestão dos resíduos hospitalares e o papel da autoridade de saúde : caso do concelho da Amad

RESUMO O Problema. A natureza, diversidade e perigosidade dos resíduos hospitalares (RH) exige procedimentos específicos na sua gestão. A sua produção depende do número de unidades de prestação de cuidados de saúde (upcs), tipo de cuidados prestados, número de doentes observados, práticas dos profissionais e dos órgãos de gestão das upcs, inovação tecnológica, entre outros. A gestão integrada de RH tem evoluído qualitativamente nos últimos anos. Existe uma carência de informação sobre os quantitativos de RH produzidos nas upcs e na prestação de cuidados domiciliários, em Portugal. Por outro lado, os Serviços de Saúde Pública, abrangendo o poder de Autoridade de Saúde, intervêm na gestão do risco para a saúde e o ambiente associado à produção de RH, necessitando de indicadores para a sua monitorização. O quadro legal de um país nesta matéria estabelece a estratégia de gestão destes resíduos, a qual é condicionada pela classificação e definição de RH por si adoptadas. Objectivos e Metodologias. O presente estudo pretende: quantificar a produção de RH resultantes da prestação de cuidados de saúde, em seres humanos e animais nas upcs, do sistema público e privado, desenvolvendo um estudo longitudinal, onde se quantifica esta produção nos Hospitais, Centros de Saúde, Clínicas Médicas e Dentárias, Lares para Idosos, Postos Médicos de Empresas, Centros de Hemodiálise e Clínicas Veterinárias do Concelho da Amadora, e se compara esta produção em dois anos consecutivos; analisar as consequências do exercício do poder de Autoridade de Saúde na gestão integrada de RH pelas upcs; quantificar a produção média de RH, por acto prestado, nos cuidados domiciliários e, com um estudo analítico transversal, relacionar essa produção média com as características dos doentes e dos tratamentos efectuados; proceder à análise comparativa das definições e classificações de RH em países da União Europeia, através de um estudo de revisão da legislação nesta matéria em quatro países, incluindo Portugal. Resultados e Conclusões. Obtém-se a produção média de RH, por Grupos I+II, III e IV: nos Hospitais, por cama.dia, considerando a taxa de ocupação; por consulta, nos Centros de Saúde, Clínicas Médicas e Dentárias e Postos Médicos de Empresas; por cama.ano, nos Lares para Idosos, considerando a sua taxa de ocupação; e por ano, nas Clínicas de Hemodiálise e Veterinárias. Verifica-se que a actuação da Autoridade de Saúde, produz nas upcs uma diferença estatisticamente significativa no aumento das contratualizações destas com os operadores de tratamento de RH. Quantifica-se o peso médio de resíduos dos Grupos III e IV produzido por acto prestado nos tratamentos domiciliários e relaciona-se esta variável dependente com as características dos doentes e dos tratamentos efectuados. Comparam-se os distintos critérios utilizados na elaboração das definições e classificações destes resíduos inscritas na legislação da Alemanha, Reino Unido, Espanha e Portugal. Recomendações. Apresentam-se linhas de investigação futura e propõe-se uma reflexão sobre eventuais alterações de aspectos específicos no quadro legal português e nos planos de gestão integrada de RH, em Portugal. ABSTRACT The problem: The nature, diversity and hazardousness of hospital wastes (HW) requires specific procedures in its management. Its production depends on the number and patterns of healthcare services, number of patients, professional and administration practices and technologic innovations, among others. Integrated management of HW has been developping, in the scope of quality, for the past few years. There is a lack of information about the amount of HW produced in healthcare units and in the domiciliary visits, in Portugal. On the other hand, the Public Health Services, embracing the Health Authority’s power, play a very important role in managing the risk of HW production to public and environmental health. They need to use some indicators in its monitorization. In a country, rules and regulations define hospital waste management policies, which are confined by the addopted classification and definition of HW. Goals and Methods: This research study aims to quantify the production of HW as a result of healthcare services in human beings and animals, public service and private one. Through a longitudinal study, this production is quantified in Hospitals, Health Centers, Medical and Dental Clinics, Residential Centers for old people, Companies Medical Centers and Veterinary and Haemodyalisis Clinics in Amadora’s Council, comparing this production in two consecutive years. This study also focus the consequences of the Health Authority’s role in the healthcare services integrated management of HW. The middle production of HW in the domiciliary treatments is also quantified and, with a transversal analytic study, its association with patients and treatments’ characteristics is enhanced. Finally, the definitions and classifications in the European Union Countries are compared through a study that revises this matter’s legislation in four countries, including Portugal. Results and Conclusions: We get the middle production of Groups I+II, III and IV: HW: in Hospitals, by bed.day, bearing the occupation rate; by consultation, in Health Centers, Medical and Dental Clinics and Companies Medical Centers; by bed.year in Residential Centers for old people, considering their occupation rate; by year, in Veterinary and Haemodyalisis Clinics. We verify that the Health Authority’s role produces a significative statistical difference in the rise of the contracts between healthcare services and HW operators. We quantify the Groups III and IV’s wastes middle weight, produced by each medical treatment in domiciliary visits and relate this dependent variable with patients and treatments’ characteristics. We compare the different criteria used in the making of definitions and classifications of these wastes registered in German, United Kingdom, Spain and Portugal’s laws. Recommendations: Lines of further investigation are explaned. We also tender a reflexion about potential changes in rules, in regulations and in the integrated plans for managing hospital wastes in Portugal. RÉSUMÉ Le Problème. La gestion des déchets d'activités hospitalières (DAH) et de soins de santé (DSS) exige des procédures spécifiques en raison de leur nature, diversité et dangerosité. Leur production dépend, parmi d’autres, du nombre d’unités de soins de santé (USS), du type de soins administrés, du nombre de malades observés, des pratiques des professionnels et des organes de gestion des USS, de l’innovation technologique. La gestion intégrée des DAH et des DSS subit une évolution qualitative dans les dernières années. Il existe un déficit d’information sur les quantitatifs de DAH et de DSS provenant des USS et de la prestation de soins domiciliaires, au Portugal. D’autre part les Services de Santé Publique, y compris le pouvoir de l’Autorité de Santé, qui interviennent dans la gestion du risque pour la santé et pour l’environnement associé à la production de DAH et de DSS, ont besoin d’indicateurs pour leur surveillance. Dans cette matière le cadre légal établit la stratégie de gestion de ces déchets, laquelle est conditionnée par la classification et par la définition des DAH et des DSS adoptées par le pays. Objectifs et Méthodologie. Cet étude prétend: quantifier la production de DAH et de DSS provenant de la prestation de soins de santé, en êtres humains et animaux dans les USS du système public et privé. À travers un étude longitudinal, on quantifie cette production dans les Hôpitaux, Centres de Santé, Cliniques Médicales et Dentaires, Maisons de Repos pour personnes âgées, Cabinets Médicaux d’ Entreprises, Centres d’Hémodialyse et Cliniques Vétérinaires du municipe d’ Amadora, en comparant cette production en deux ans consécutifs; analyser les conséquences de l’exercice du pouvoir de l’Autorité de Santé dans la gestion intégrée des DAH et des DSS par les USS; quantifier la production moyenne de DAH et de DSS dans la prestation de soins domiciliaires et, avec un étude analytique transversal, rapporter cette production moyenne avec les caractéristiques des malades et des soins administrés; procéder à l’ analyse comparative des définitions et classifications des DAH et des DSS dans des pays de l’Union Européenne, à travers un étude de révision de la législation relative à cette matière dans quatre pays, Portugal y compris. Résultats et Conclusions. On obtient la production moyenne de DAH et des DSS, par Classes I+II, III et IV: dans les hôpitaux, par lit.jour, en considérant le taux d’occupation; par consultation, dans les Centres de Santé, Cliniques Médicales et Dentaires et Cabinets Médicaux d’ Entreprises par lit.an dans les Maisons de Repos pour personnes âgées en considérant le taux d’occupation; et par an, dans les Cliniques d’Hémodialyse et Vétérinaires. On constate que l’actuation de l’Autorité de Santé produit dans les USS une différence statistiquement significative dans l’accroissement de leurs contractualisations avec les opérateurs de traitement de DAH et de DSS. On quantifie le poids moyen des déchets des Classes III et IV produit par acte de prestation de soins à domicile et on rapporte cette variable dépendante avec les caractéristiques des malades et des soins administrés. On compare les différents critères utilisés dans l’élaboration des définitions et des classifications de ces déchets inscrites dans la légis