An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Semantic relations extraction from unstructured information for domain ontologies enrichment

Based in internet growth, through semantic web, together with communication speed improvement and fast development of storage device sizes, data and information volume rises considerably every day. Because of this, in the last few years there has been a growing interest in structures for formal representation with suitable characteristics, such as the possibility to organize data and information, as well as the reuse of its contents aimed for the generation of new knowledge. Controlled Vocabulary, specifically Ontologies, present themselves in the lead as one of such structures of representation with high potential. Not only allow for data representation, as well as the reuse of such data for knowledge extraction, coupled with its subsequent storage through not so complex formalisms. However, for the purpose of assuring that ontology knowledge is always up to date, they need maintenance. Ontology Learning is an area which studies the details of update and maintenance of ontologies. It is worth noting that relevant literature already presents first results on automatic maintenance of ontologies, but still in a very early stage. Human-based processes are still the current way to update and maintain an ontology, which turns this into a cumbersome task. The generation of new knowledge aimed for ontology growth can be done based in Data Mining techniques, which is an area that studies techniques for data processing, pattern discovery and knowledge extraction in IT systems. This work aims at proposing a novel semi-automatic method for knowledge extraction from unstructured data sources, using Data Mining techniques, namely through pattern discovery, focused in improving the precision of concept and its semantic relations present in an ontology. In order to verify the applicability of the proposed method, a proof of concept was developed, presenting its results, which were applied in building and construction sector.

Vascularização do útero: estudo morfológico e experimental

RESUMO Os trabalhos de investigação, conducentes à elaboração do presente estudo morfofuncional, subordinado ao tema da "VASCULARIZAÇÃO ARTERIAL DO ÚTERO",fundamenta-se em conceitos da anatomia descritiva clássica, complementados por técnicas de estudo mais modernas, permitindo-nos observações originais. O principal objectivo é de definir um padrão descritivo da vascularização uterina e de estabelecer uma correlação anatomo-fisiológica e anatomo-clínica na descrição da angiomorfologia uterina, actualizando as descrições clássicas da artéria com dados de observação originais, segundo as técnicas de estudo angiomorfológicas correntemente empregues no Departamento de Anatomia da Faculdade de Ciências Médicas da Universidade Nova de Lisboa. Correlacionam-se as observações com os mais recentes dados publicados, no âmbito da imuno-histoquímica e da moderna bioquímica endocrinológica, uma vez que os conceitos modernos de fisiologia uterina e ginecológica praticamente dominam a vasta literatura científica mundial. Como objectivos particulares, ou linhas orientadoras da tese, escolhemos: - A definição de parâmetros descritivos do padrão genérico da vascularização uterina, actualizando a nomenclatura descritiva de acordo com a moderna Nomina Anatomica mundialmente debatida, desde o XIV Congresso Internacional da Federação Internacional das Associações de Anatomistas, sob a presidência do Prof. Doutor J.A. Esperança Pina (1994) e publicada em 1999-2001. - A comparação do caso humano com o do animal de experiência, por observação meticulosa do maior número de casos possíveis, realizando um estudo comparativo que nos permita extrapolar dados de experimentação animal para o caso humano; - O estabelecimento de uma correlação anatomo-fisiológica, por análise do comportamento da vascularização uterina, ao longo da vida, desde o nascimento até à menopausa, e perante as influências hormonais a que se encontra exposta. A tese constrói-se em torno de três núcleos fundamentais: 1. Um capítulo introdutório, de contextualização teórica, por enquadramento histórico dos estudos dos órgãos genitais femininos e da evolução das técnicas de diagnóstico e terapêutica do útero, focando as primeiras referências à técnica da histerotomia (Cesariana) (com a lenda persa do nascimento do herói Rostam, ou do nascimento do deus Asclepius), as primeiras representações da vascularização uterina (por LEONARDO e iii VESÁLIO), ou as primeiras descrições anatómicas do útero, da autoria de Portugueses (RODRIGO DE CASTRO, 1516 e AMATO LUSITANO, 1551). Prossegue a contextualização teórica com breve referência à recente evolução das técnicas de diagnóstico e terapêutica dos fibromiomas uterinos, mencionando de modo particular a evolução das técnicas de embolização arterial uterina, por nos parecer corresponder a um campo de aplicação imediata dos estudos da vascularização do útero. Termina este capítulo com breve referência aos trabalhos do Prof. Doutor J. MARTINS PISCO que tem actualmente, no nosso País uma das mais extensas listas de trabalhos efectuados com sucesso a nível mundial, no campo da embolização arterial de fibromiomas uterinos. 2. O segundo núcleo fundamental, intitulado "Angiomorfologia uterina" corresponde a extensa revisão bibliográfica dos estudos descritivos da vascularização uterina, desde logo ilustrando a resenha teórica com algumas imagens fotográficas de úteros humanos, seleccionadas da nossa colecção. A descrição da vascularização uterina, fundamentada em 1500 citações bibliográficas, organiza-se, de acordo com o paralelismo entre a estratificação histológica e angiológica do órgão, e a hierarquia funcional, regulada pelas cíclicas variações hormonais. Descreve-se a camada serosa e correspondente vascularização; a camada muscular e vascularização do miométrio; e, por fim, a camada mucosa e os vasos endometriais. Verifica-se, perante os dados colhidos da literatura mundial, o interesse do aprofundamento dos estudos morfológicos da microvascularização endometrial e da adaptação das descrições aos resultados dos modernos estudos funcionais obtidos por técnicas da imuno-histoquímica. 3. Fundamentados nos dados colhidos das revisões bibliográficas, elaborámos um projecto de investigação original, visando o estabelecimento da relação morfo-funcional resultante do aprofundamento dos estudos descritivos da angiomorfologia e da microvascularização do útero. O capítulo de trabalho experimental organiza-se em três principais passos: – No capítulo de Materiais e métodos, procede-se à escolha, por um lado do animal de experiência mais adequado para os estudos da vascularização uterina (por estudo comparativo ao longo da escala animal) e, por outro lado, à escolha de três das técnicas disponíveis no Laboratório de Anatomia Experimental e aplicáveis à investigação angiomorfológica do útero; iv - No capítulo de Resultados, procedemos à exposição das nossas observações de 25 úteros humanos e de 154 úteros de animais de experiência, segundo as três técnicas seleccionadas (dissecção, Injecção-corrosão-fluorescência, Injecção-diafanização e injecção-corrosão paraobservação de moldes vasculares em microscopia electrónica de varrimento), organizando aselecção da vasta iconografia coleccionada em três novos subcapítulos: o útero humano, oútero do animal de experiência e um estudo comparativo, essencial para validar osresultados do trabalho experimental. - O capítulo de trabalho experimental, inteiramente efectuado por estudos na artéria uterina do rato Wistar, abrange primeiramente a tentativa de definição macroscópica de territórios de vascularização, seguido das observações microscópicas conducentes à definição dos parâmetros angiomorfológicos característicos de cada uma das etapas da grande variabilidade a que se sujeita a vascularização uterina, ao longo da vida, incluindo a infância, a gravidez, a paridade e o envelhecimento, e consoante as fases do ciclo hormonal ovárico. Aperfeiçoámos essa tarefa com a elaboração de três experiências distintas, para análise dos efeitos microvasculares uterinos da administração exógena de preparados comerciais hormonais, por observação em microscopia electrónica de varrimento. De acordo com as leituras da literatura clássica sobre a metodologia do trabalho científico, completamos os trabalhos por um capítulo de síntese e critica dos resultados, sequencialmente organizado consoante cada um dos passos experimentais atrás referidos. SUMMARY The aim of the present thesis is the description of the uterine arterial network, complementing the classical concepts of descriptive Anatomy with modern techniques of anatomical research, thus achieving original final results and observations. One of the main objectives of the research is to establish physiological and clinical correlations in the description of the uterine angiomorphology, with the techniques currently available for angiomorphological research in the Department of Anatomy of Faculty of Medical Sciences of the New University of Lisbon. As guidelines to our research, we established the following specific objectives: - defining the descriptive parameters of the standard pattern of the uterine vasculature, according to the modern Nomina Anatomica, as underlined in the latest Federative Congresses of the International Federation of the Associations of Anatomists, one of which took place in Lisbon, in 1994, under the presidency of Professor J.A. Esperança Pina, the supervisor of the present works; - comparing the human uterus with the uterus of the experimental animal, to extrapolate the experimental observations in animals to the particular case of the human uterus; - establishing a correlation between the physiology and the anatomical observations of the uterine vasculature throughout life, from childhood to menopause and in relation to the hormonal influences to which the uterus is exposed. The thesis is built around three main chapters: 1) The introduction chapter defines the historical framework of the studies of the female genital anatomy and the historical evolution of the clinical management of common uterine diseases, focusing on the first historical references to the Caesarean section (such as the Persian legend of the birth of the hero ROSTAM, or that of the birth of ASCLEPIUS, the Greek god of Medicine); the first depictions of the uterine vasculature (by LEONARDO and VESALIUS) or the first anatomical descriptions of the uterus, by Portuguese authors (RODRIGO DE CASTRO, 1517, or AMATUS LUSITANUS, 1551). The theoretical context proceeds, with reference to the recent evolution of the clinical and surgical management of uterine fibroids, and a particular mention to the modern techniques of Uterine Fibroid Embolisation, which corresponds to one of the fields of interest of the anatomic studies of uterine arterial vascularization. 2) The second chapter, devoted to the anatomical description of the Uterine Angiomorphology, is based on an extensive review of the available Medical literature,illustrated by a selection of our own research observations of the human uterine vasculature. The description is organized in view of the parallelism between histological and angiological stratification and the functional hierarchy, under the control of the cyclic hormonal variations. Each layer of the uterine wall is depicted with photographs of the human uterus and descriptions of its specific vascular network: the serosa, the muscular Myometrium, and the mucosa, or endometrium. This classical description, based on extensive quotations of the international scientific literature, enhances our interest for the research of a more detailed knowledge of the endometrial microvascular network, accordingly to the modern physiologic results obtained through immunohistochemical studies. 3) The results of our experimental research, aiming to establish the intimate relationship between the anatomical and functional studies of uterine vasculature, are organized in three main steps: - The chapter of Materials and Methods debates the choice of the experimental animal, based on a short review of the comparative anatomy of the uterus, and uterine physiology, throughout the animal scale. The selection of three fundamental techniques of anatomic research is made from the current variety available in the Laboratory of Experimental Anatomy of the Lisbon School of Medical Sciences. - The Results of our personal research and observations of 25 human and 154 animal uteri,after dissection, and the techniques of arterial injection for the preparation of fluorescent corrosion casts, of vascular injection and clearing, and of arterial injection and preparation of corrosion casts for Scanning Electron Microscopy are rganized in terms of human or animal macroscopic anatomy and microvascular network, followed by a summary of the comparative anatomy of human and rat uteri, which is essential to validate the resultant experimental observations of the rat endometrial microvasculature. - The experimental research is entirely devoted to the uterine artery of the Wistar rat. The first step consists of the attempt to define macroscopic territories of vascularization, followed by microscopic observations for the definition of the angiomorphological pattern that is characteristic of each stage of the extreme variations to which the uterus is subject throughout life, from childhood to sexual maturity, throughout the hormonal cycle, in pregnancy, according to parity, and through ageing. We complete these observations with the experimental exposure of the Wistar rat uterus to pharmacologic preparations of hormones, currently available in clinical practice, and observations of the vascular uterine changes in Scanning Electron Microscopy. The outcome results of our anatomical observations are followed by a critical synthesis of the results.

Improving discovery in the life sciences using semantic Web technologies and linked data: design principles for life sciences knowledge organization systems

Dissertation presented to obtain the Ph.D degree in Bioinformatics

Declarative approach to data extraction of web pages

Thesis submitted to Faculdade de Ciências e Tecnologia of the Universidade Nova de Lisboa, in partial fulfilment of the requirements for the degree of Master in Computer Science

Os enfermeiros e as dimensões motivacionais : estudo não experimental, descritivo, analítico e transversal, baseado na técnica de inquérito

RESUMO - A profissão de enfermagem é definida por Virgínia Henderson (1966), como tendo por objeto "ajudar o indivíduo, saudável ou doente, na execução das atividades que contribuem para conservar a sua saúde ou a sua recuperação, de tal maneira, devendo desempenhar esta função no sentido de tornar o indivíduo o mais independente possível, ou seja, a alcançar a sua anterior independência". A atenção à saúde ao longo da história da humanidade vem sendo desenvolvida de muitos modos e por diversos atores sociais. O trabalho em saúde é essencial para a vida humana e envolve atividades realizadas por profissionais e equipas multidisciplinares que dominam os conhecimentos e técnicas essenciais para assistir o indivíduo com problemas de saúde ou em risco de adoecer, em atividades de investigação, de prevenção, curativo e de reabilitação. À Enfermagem tal como a outras profissões, são cada vez mais exigidos requisitos de eficiência, eficácia e polivalência na sua atividade, tendo a motivação um papel fundamental na atitude, postura e desempenho do profissional. Este trabalho descreve o estudo da motivação profissional, numa população de enfermeiros portugueses numa instituição privada. A versão adaptada de um inquérito como instrumento de autopreenchimento representa vários construtos implicados no processo motivacional, em contexto profissional. Pretendo com este estudo identificar a dimensão da motivação mais relevantes no processo motivacional dos enfermeiros, assim como as suas variações face a variáveis de características pessoais, profissionais e institucionais. A partir dos resultados obtidos pretendo ainda apresentar sugestões de maneira a oferecer oportunidade de transformação do seu ambiente organizacional em instituições similares.

Earth-based repair mortars: experimental analysis with different binders and natural fibers

RESTAPIA 2012 - Int. Conf. on Rammed Earth Conservation, Valencia, 21-23 June 2012

A knowledge-based framework to facilitate E-training implementation

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores

Experimental characterization of an earth eco-efficient plastering mortar

Earthen plastering mortars are becoming recognized as highly eco-efficient. The assessment of their technical properties needs to be standardized but only the German standard DIN 18947 exists for the moment. An extended experimental campaign was developed in order to assess multiple properties of a ready-mixed earth plastering mortar and also to increase scientific knowledge of the influence of test procedures on those properties. The experimental campaign showed that some aspects related to the equipment, type of samples and sample preparation can be very important, while others seemed to have less influence on the results and the classification of mortars. It also showed that some complementary tests can easily be performed and considered together with the standardized ones, while others may need to be improved. The plaster satisfied the requirements of the existing German standard but, most importantly, it seemed adequate for application as rehabilitation plaster on historic and modern masonry buildings. Apart from their aesthetic aspect, the contribution of earthen plasters to eco-efficiency and particularly to hygrometric indoor comfort should be highlighted.

Antioxidant extraction process for Andean Oca by a photodiode array detector using response surface methodology

Application of Experimental Design techniques has proven to be essential in various research fields, due to its statistical capability of processing the effect of interactions among independent variables, known as factors, in a system’s response. Advantages of this methodology can be summarized in more resource and time efficient experimentations while providing more accurate results. This research emphasizes the quantification of 4 antioxidants extraction, at two different concentration, prepared according to an experimental procedure and measured by a Photodiode Array Detector. Experimental planning was made following a Central Composite Design, which is a type of DoE that allows to consider the quadratic component in Response Surfaces, a component that includes pure curvature studies on the model produced. This work was executed with the intention of analyzing responses, peak areas obtained from chromatograms plotted by the Detector’s system, and comprehending if the factors considered – acquired from an extensive literary review – produced the expected effect in response. Completion of this work will allow to take conclusions regarding what factors should be considered for the optimization studies of antioxidants extraction in a Oca (Oxalis tuberosa) matrix.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.