11 resultados para collapse of speculative bubbles


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The 2008 global financial crisis caused the collapse of business key sectors, declines in consumer wealth and a fall in economic activity resulting in a global recession. In some European countries, the 2008 crisis contributed to a sovereign-debt crisis which had a strong impact in Southern European countries. The construction sector was particularly affected, with budget cuts disturbing public investment and no financing available for private constructors. This report intends to explain how Mota-Engil, faced this situation of low growth, and which strategies were adopted by the management to overcome the difficult economic conjecture, mainly in its domestic market: Portugal. The report is organized as a case-study. The first part, the case narrative, is subdivided into 6 parts, and the second part is the teaching note. The teaching note is constituted by the four questions and their respective responses.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Author's Pre-print

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Born in Armenia, the oldest Christian country in the world but nevertheless one of the youngest reinstated republics (1991) after the collapse of the Soviet Union, Arshile Gorky flew to the United States in 1920, where he chose to reinvent himself in the struggle to become an artist. This reinvention meant the creation of a persona with, or behind, which Gorky kept alive the artistic flame inside himself. Gorky became one of the most learned voices lecturing on contemporary European modernist artists and movements of the late nineteenth and early twentieth centuries in the United States (New York) without ever visiting Europe. Moreover, he was able to survive the traumatic events he underwent during the Armenian Genocide (1915-1919) to adapt to his new country and identity, to live through the years of the Depression and, eventually, to become the protagonistof a major artistic breakthrough. This paper proposes an insight into the experience of life and frame of work of this Armenian-American artist, whose simultaneously rich, traumatic, dislocated and reenacted life and work established one of the most fertile links between his middle‑eastern origins, his dreamed of Europe and the particular transit of his American artistic creation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O período após o colapso da União Soviética foi o tempo da procura de novas identidades na nova realidade e de escolha de novos parceiros e aliados, o tempo da construção de novos estados e de formulação das regras e normas nacionais. Após o desmoronamento da ideologia soviética - um facto reconhecido oficialmente durante o período da Perestroika –, as pessoas sentiram uma necessidade de preencher o vácuo ideológico e desenvolver uma nova identidade. Foi proclamada a rejeição da estrutura política administrativa herdada da União Soviética e do sistema de economia planificada, e desenvolvida a tendência para a construção do estado democrático fundado numa economia de mercado. As expectativas relativas às transformações no período pós-soviético estavam relacionadas com o Ocidente (EUA e UE), e a construção do estado soberano foi fundada em modelos ocidentais de estado de direito, ‘boa governança’ e a economia de mercado. A UE desempenhou um papel importante na democratização dos estados da região do Sul do Cáucaso através de vários projetos e programas bilaterais e multilaterais no âmbito da Política Europeia de Vizinhança e da Parceria Oriental. Embora as reformas democráticas tenham sido realizadas com vista ao estabelecimento de uma Constituição democrática, à implementação de eleições democráticas e ao desenvolvimento da sociedade civil, fortaleceram, também, ainda mais, a natureza autoritária do poder, impediram a criação de um estado de direito, reforçaram violação dos direitos e das liberdades humanas. (NODIYA, 2003: 30; BAKHMAN, 2003: 17; BADALOV, 2003: 20). Deste modo, o processo da promoção da democracia através das reformas nos três estados do Sul do Cáucaso conduziu à criação de estados de “conteúdo autocrático misto, mas de forma democrática” (CHETERYAN, 2003: 41). Embora seja possível identificar as semelhanças entre os três estados da região do Sul do Cáucaso nas reformas do processo de desenvolvimento, os métodos e meios de implementação de reformas nas realidades dos estados regionais pela administração nacional foram bastante diferentes, por razões associadas às especificidades de cada um (DELCOUR e WOLCZUK, 2013: 3). Cada país é caracterizado pelas suas peculiaridades ao nível da situação geopolítica e diversidade do potencial económico – fatores que definem a trajetória política e económica do estado no período pós-soviético e, em certa medida, influenciam o modo como se desenvolvem as relações com a UE e, portanto, o processo de adoção das reformas e a sua introdução a nível nacional.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Química e Bioquímica

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Some of the properties sought in seismic design of buildings are also considered fundamental to guarantee structural robustness. Moreover, some key concepts are common to both seismic and robustness design. In fact, both analyses consider events with a very small probability of occurrence, and consequently, a significant level of damage is admissible. As very rare events,in both cases, the actions are extremely hard to quantify. The acceptance of limited damage requires a system based analysis of structures, rather than an element by element methodology, as employed for other load cases. As for robustness analysis, in seismic design the main objective is to guarantee that the structure survives an earthquake, without extensive damage. In the case of seismic design, this is achieved by guaranteeing the dissipation of energy through plastic hinges distributed in the structure. For this to be possible, some key properties must be assured, in particular ductility and redundancy. The same properties could be fundamental in robustness design, as a structure can only sustain significant damage if capable of distributing stresses to parts of the structure unaffected by the triggering event. Timber is often used for primary load‐bearing elements in single storey long‐span structures for public buildings and arenas, where severe consequences can be expected if one or more of the primary load bearing elements fail. The structural system used for these structures consists of main frames, secondary elements and bracing elements. The main frame, composed by columns and beams, can be seen as key elements in the system and should be designed with high safety against failure and under strict quality control. The main frames may sometimes be designed with moment resisting joints between columns and beams. Scenarios, where one or more of these key elements, fail should be considered at least for high consequence buildings. Two alternative strategies may be applied: isolation of collapsing sections and, provision of alternate load paths [1]. The first one is relatively straightforward to provide by deliberately designing the secondary structural system less strong and stiff. Alternatively, the secondary structural system and the bracing system can be design so that loss of capacity in the main frame does not lead to the collapse. A case study has been selected aiming to assess the consequences of these two different strategies, in particular, under seismic loads.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

African Studies Review, Volume 52, Number 2, pp. 35–

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The study of the effect of radiation on living tissues is a rather complex task to address mainly because they are made of a set of complex functional biological structures and interfaces. Particularly if one is looking for where damage is taking place in a first stage and what are the underlying reaction mechanisms. In this work a new approach is addressed to study the effect of radiation by making use of well identified molecular hetero-structures samples which mimic the biological environment. These were obtained by assembling onto a solid support deoxyribonucleic acid (DNA) and phospholipids together with a soft water-containing polyelectrolyte precursor in layered structures and by producing lipid layers at liquid/air interface with DNA as subphase. The effects of both ultraviolet (UV) radiation and carbon ions beams were systematically investigated in these heterostructures, namely damage on DNA by means vacuum ultraviolet (VUV), infrared (IR), X-Ray Photoelectron (XPS) and impedance spectroscopy. Experimental results revealed that UV affects furanose, PO2-, thymines, cytosines and adenines groups. The XPS spectrometry carried out on the samples allowed validate the VUV and IR results and to conclude that ionized phosphate groups, surrounded by the sodium counterions, congregate hydration water molecules which play a role of UV protection. The ac electrical conductivity measurements revealed that the DNA electrical conduction is arising from DNA chain electron hopping between base-pairs and phosphate groups, with the hopping distance equal to the distance between DNA base-pairs and is strongly dependent on UV radiation exposure, due loss of phosphate groups. Characterization of DNA samples exposed to a 4 keV C3+ ions beam revealed also carbon-oxygen bonds break, phosphate groups damage and formation of new species. Results from radiation induced damage carried out on biomimetic heterostructures having different compositions revealed that damage is dependent on sample composition, with respect to functional targeted groups and extent of damage. Conversely, LbL films of 1,2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) liposomes, alternated with poly(allylamine hydrochloride) (PAH) revealed to be unaffected, even by prolonged UV irradiation exposure, in the absence of water molecules. However, DPPG molecules were damaged by the UV radiation in presence of water with cleavage of C-O, C=O and –PO2- bonds. Finally, the study of DNA interaction with the ionic lipids at liquid/air interfaces revealed that electrical charge of the lipid influences the interaction of phospholipid with DNA. In the presence of DNA in the subphase, the effects from UV irrladiation were seen to be smaller, which means that ionic products from biomolecules degradation stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Finance from NOVA – School of Business and Economics and a Masters Degree in Management from Louvain School of Management