Analysis of early synthetic dyes with HPLC-DAD-MS: an important database for analysis of colorants used in cultural heritage

Presented thesis at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Cochineal, a precious source of red: cochineal dyes characterization by high performance liquid chromatography with diode array detection and principal component analysis

Presented at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Spectroscopic characterization of natural dyes by their non-invasive identification on pre-Columbian codices: the Maya yellow

Mesoamerican cultures had a strong tradition of written and pictorial manuscripts, called the codices. In studies already performed it was found the use of Maya Blue, made from a mixture of indigo and a clay called palygorskite, forming an incredibly stable material where the dye is trapped inside the nanotubes of the clay, after heating. However, a bigger challenge lies in the study of the yellows used, for these civilizations might have used this clay-dye mixture to produce their yellow colorants. As a first step, it was possible to provide identification, by non-invasive methods, of two colorants (a flavonoid and a carotenoid). While the flavonoid absorbed between 368-379 nm, the carotenoid would absorb around 455 nm. A temperature study also conducted allowed to set 140ºC as the desirable temperature to heat the samples without degrading them. FT-IR, conventional Raman and SERS allowed us to understand the existence of a reaction between the dyes and the clays (palygorskite and kaolinite), however it is difficult to understand it in a molecular point of view. As a second step, five species of Mexican dyes were selected on the basis of historical sources. The Maya yellow samples were produced adapting the recipe proposed by Reyes-Valerio, supporting the yellow dyes extracted from the dried plants on the clays, with addition of water, and then heated at 140ºC. It was found that the addition of water in palygorskite would increase the pH, hence deprotonating the molecules having a clear negative effect in the color. A second recipe was developed, without the addition of water; however, it was found that the use of water based binders would still alter the color of the samples with palygorskite. In this case, kaolinite without heating yield better results as a Maya yellow hybrid. It was found that the Maya chemistry might not have been the same for all the colors. The Mesoamericans might have found that different dyes could work better to their desires if matched with different clays. It was noticeable that for a clear distinction between flavonoids and carotenoids the reflectance and emission studies suffice, but when clay is added, Raman techniques will perform better. For this reason, conventional Raman and SERS were employed in order to create a database for the Mesoamerican dyestuffs for a future identification.

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Chromian spinels in the basalts from the Lisbon volcanic complex (portugal) and their petrogenetic implications

Chromian spinels are common in the late Cretaceous alkali basalts of the Lisbon volcanic Complex in Portugal. They occur as unzoned inclusions in magnesian olivines of all basalt types and as large spectacularly zoned grains in the groundmass of porphyritic basalts. Microprobe analysis indicate complex cationic exchange in the groundmass zoned spinels due to simple peritectic reactions and in response to changing composition of the basalt liquid. The variation of cationic distribution in zoned chromian-Spinels, reflects very accurately the changing chemistry of the cooling silicate melt and the paragenetical relations of mineral oxides and silicates. Crystallization of initial chromian spinels occurred at T~1200°C and fO2~10-8.5 atm. earlier or contemporaneously with magnesian olivine. The titanomagnetite mantles of zoned chromian spinels crystallized at T~1200°C and much lower fO2.

A contribuição das bombas de efluxo QacA e Smr para a multirresistência em Staphylococcus aureus

RESUMO: O efluxo de compostos antimicrobianos é um mecanismo importante na multirresistência em bactérias. Bombas de efluxo codificadas em plasmídeos, como a QacA e a Smr, estão implicadas na susceptibilidade reduzida a biocidas, geralmente utilizados na prevenção e controlo de infecções nosocomiais, incluindo as causadas por estirpes de Staphylococcus aureus resistentes à meticilina (MRSA). Neste trabalho pretendeu-se avaliar a relevância de QacA e Smr no perfil de susceptibilidade dos isolados clínicos MRSA SM39 e SM52, que transportam os plasmídeos pSM39 e pSM52 com os determinantes qacA e smr, respectivamente. A actividade de efluxo das estirpes SM39 e SM39 curada (sem pSM39) e das estirpes SM52 e RN4220:pSM52 (estirpe susceptível RN4220 transformada com pSM52) foi caracterizada por: (1) determinação da concentração mínima inibitória (CMI) de biocidas, corantes e antibióticos, na ausência e presença dos inibidores de efluxo tioridazina, clorpromazina, verapamil e reserpina; e (2) fluorometria em tempo-real. A determinação de CMIs demonstrou que a actividade de efluxo mediada por QacA e Smr está envolvida na susceptibilidade reduzida aos biocidas e corantes testados, que incluíram o brometo de hexadeciltrimetilamónio, a cetrimida, o cloreto de benzalcónio, a berberina, o cloreto de dequalínio, a pentamidina e o brometo de etídeo. Os ensaios fluorométricos confirmaram a elevada actividade de efluxo presente nas estirpes com os genes qacA ou smr. A determinação de CMIs para antibióticos β-lactâmicos em conjunto com o teste da nitrocefina revelou a presença simultânea do gene qacA e de uma β-lactamase no plasmídeo pSM39. Este trabalho evidencia a importância das bombas de efluxo QacA e Smr na resistência a biocidas em estirpes MRSA e na sobrevivência destas estirpes em ambiente hospitalar e na comunidade, para além de destacar a questão da potencial co-resistência entre biocidas e antibióticos.--------------- ABSTRACT: Drug efflux has become an important cause of multidrug resistance (MDR) in bacteria. Plasmid-encoded MDR efflux pumps, such as QacA and Smr, are implicated in reduced susceptibility to biocides, generally used in the prevention and control of nosocomial infections, including the ones caused by methicillin-resistant Staphylococcus aureus (MRSA). In this work, we aimed to evaluate the relevance of QacA and Smr to the susceptibility profile of the clinical MRSA isolates SM39 and SM52, which harbor the plasmids pSM39 and pSM52 that carry the determinants qacA and smr, respectively. Efflux activity of strain SM39 and its plasmid-free counterpart, SM39 cured, SM52 and RN4220:pSM52 (susceptible strain RN4220 transformed with pSM52) was characterized by: (1) determination of minimum inhibitory concentration (MIC) of biocides, dyes and antibiotics, in the absence and presence of the efflux inhibitors thioridazine, chlorpromazine, verapamil and reserpine; and (2) real-time fluorometry. MIC determination showed that QacA and Smr mediated efflux was involved in the reduced susceptibility profile to the biocides and dyes tested, which included hexadecyltrymethylammonium bromide, cetrimide, benzalkonium chloride, berberine, dequalinium chloride, pentamidine and ethidium bromide. Fluorometric assays confirmed the higher efflux activity present in strains harboring qacA or smr genes. Moreover, MIC determination for β-lactam antibiotics together with the nitrocefin test confirmed the presence of a β-lactamase in the plasmid carried by SM39 strain, pSM39. This work highlights the relevance of QacA and Smr to the biocide resistance in MRSA strains, and consequently to their survival and maintenance in the hospital environment and in the community. Furthermore, the presence of a β-lactamase and qacA determinants in the the same plasmid reinforces the question of the potencial biocide/antibiotic co-resistance in MRSA strains.

Quantum dots: synthesis, functionalization and bioconjugation for biological applications

Dissertation presented to obtain the Ph.D degree in Engineering Sciences and Technology

Separation of bioactive peptides by electrodialysis with ultrafiltration membranes: membrane characteristics, ex-situ and in-situ digestion and their impact on peptide migration

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Overexpressing BDNF in Neural Stem Cells using non-viral gene delivery strategies

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Cancer theranostics: multifunctional gold nanoparticles for diagnostics and therapy

Doctorate in Biology, Specialty in Biotechnology

Multiresponsive supramolecular systems for information processing at the molecular level

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Role of surfactants in filtration and fouling of colloidal silica

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities

Improved polymeric medical devices for active substances delivery

The work presented in this thesis was developed in collaboration with a Portuguese company, BeyonDevices, devoted to pharmaceutical packaging, medical technology and device industry. Specifically, the composition impact and surface modification of two polymeric medical devices from the company were studied: inhalers and vaginal applicators. The polyethylene-based vaginal applicator was modified using supercritical fluid technology to acquire self-cleaning properties and prevent the transport of bacteria and yeasts to vaginal flora. For that, in-situ polymerization of 2-substituted oxazolines was performed within the polyethylene matrix using supercritical carbon dioxide. The cationic ring-opening polymerization process was followed by end-capping with N,N-dimethyldodecylamine. Furthermore, for the same propose, the polyethylene matrix was impregnated with lavender oil in supercritical medium. The obtained materials were characterized physical and morphologically and the antimicrobial activity against bacteria and yeasts was accessed. Materials modified using 2-substituted oxazolines showed an effective killing ability for all the tested microorganisms, while the materials modified with lavender oil did not show antimicrobial activity. Only materials modified with oligo(2-ethyl-2-oxazoline) maintain the activity during the long term stability. Furthermore, the cytotoxicity of the materials was tested, confirming their biocompatibilty. Regarding the inhaler, its surface was modified in order to improve powder flowability and consequently, to reduce powder retention in the inhaler´s nozzle. New dry powder inhalers (DPIs), with different needle’s diameters, were evaluated in terms of internal resistance and uniformity of the emitted dose. It was observed that they present a mean resistance of 0.06 cmH2O0.5/(L/min) and the maximum emitted dose obtained was 68.9% for the inhaler with higher needle´s diameter (2 mm). Thus, this inhaler was used as a test and modified by the coating with a commonly-used force control agent, magnesium stearate, dried with supercritical carbon dioxide (scCO2) and the uniformity of delivered dose tests were repeated. The modified inhaler showed an increase in emitted dose from 68.9% to 71.3% for lactose and from 30.0% to 33.7% for Foradil.

Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.