Preventing human trafficking for the purpose of sexual exploitation: the need for a bottom-up approach : the case-study of Brazilians trafficked to Portugal

Masters Thesis – Academic Year 2007/2008 - European Master’s Degree in Human Rights and Democratization (E.MA) - European Inter-university Centre for Human Rights and Democratization (EIUC) -Faculdade de Direito, Universidade Nova de Lisboa (UNL)

The thickness of the transport layer in stratified geomorphic flows

River Flow 2010

A layer 2 multipath fabric using a centralized controller

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Microelectromechanical systems. Fabrication and characterization of microcantilevers

Microelectromechanical systems (MEMS) technologies can be used to produce from the simplest structures to the most complex devices and systems. Due to their many applications in various fields, MEMS have turned into one of the most researched areas in microtechnology. In this context, this project was developed in an attempt to produce one of most used structures in MEMS sensing devices - microcantilevers. Several microfabrication techniques were combined to fabricate this type of structures on the top layer of silicon of a silicon-on-insulator (SOI) wafer. After the microcantilevers had been successfully created, an experiment was set up to verify the microcantilevers ability to bend. Here, a voltage was applied between the top and bottom layers of silicon of the SOI wafer. It was then observed that the microcantilevers were deflected all the way to the bottom silicon layer by the electrostatic force acting between them, given that a current was detected when a certain value of applied voltage was reached.

Digital microfluidic devices: the role of the dielectric layer

Digital microfluidics (DMF) is a field which has emerged in the last decade as a re-liable and versatile tool for sensing applications based on liquid reactions. DMF allows the discrete displacement of droplets, over an array of electrodes, by the application of voltage, and also the dispensing from a reservoir, mixing, merging and splitting fluidic operations. The main drawback of these devices is due to the need of high driving volt-ages for droplet operations. In this work, alternative dielectric layers combinations were studied aiming the reduction of these driving voltages. DMF chips were designed, pro-duced and optimized according to the theory of electrowetting-on-dielectric, adopting different combinations of parylene-C and tantalum pentoxide (Ta2O5) as dielectric ma-terials, and Teflon as hydrophobic layer. With both devices’ configurations, i.e., Parylene as single dielectric, and multilayer chips combining Parylene and Ta2O5, it was possible to perform all the fluidic opera-tions in the microliter down to hundreds of nanoliters range. Multilayer chips presented significant reduction on driving voltages for droplet op-erations in silicone oil filler medium: from 70 V (parylene only) down to 30 V (parylene/Ta2O5) for dispensing; and from 50 V (parylene only) down to 15 V (parylene/Ta2O5) for movement. Peroxidase colorimetric reactions were successfully performed as proof-of-concept, using multilayer configuration devices.

SMEs engaging at the bottom of the pyramid: Exploring drivers of business strategies

This research paper investigates how the market conditions at the base of the pyramid (BOP) influences South African small and medium sized enterprises (SMEs) to take certain business decisions in the townships and rural areas. It takes a qualitative approach to explore how SMEs with social objectives develops mitigating strategies to successfully engage with and in poor communities. The research suggests that prevailing BOP strategies are lacking certain aspects to successfully realize them on the ground. It advices firms to take a more practical hands-on approach to identify a sustainable business model by testing, experimenting, learning and adjusting, eventually being eligible for up-scaling.

Avaliação da sustentabilidade corporativa: estudo das relações híbridas pelo modelo do Hybrid Bottom Line

A presente tese reflete sobre os temas do desenvolvimento sustentável, da sustentabilidade corporativa, da responsabilidade social corporativa e das dimensões do Triple Bottom Line. O principal objetivo do nosso trabalho é contribuir para o conhecimento das relações que se estabelecem nas interseções entre a dimensão económica, social e ambiental da sustentabilidade corporativa, aqui designadas de relações híbridas. Neste sentido, desenvolveu-se um enquadramento teórico que fundamenta o modelo proposto, designado por Hybrid Bottom Line. De acordo com este enquadramento procurou-se conceber uma metodologia que permitisse analisar como é que estas relações de interseção entre economia-ambiente e economia-social se verificam e de que forma os seus resultados podem beneficiar a compreensão, avaliação e melhorias no entendimento da sustentabilidade corporativa, bem como possibilitar uma análise dirigida a fatores recombinantes específicos. Em complemento, foi desenvolvida uma proposta que permite posicionar o esforço desenvolvido pela empresa no âmbito da sustentabilidade e desta forma tipificar as suas ações. Nesta tese a abordagem empírica recaiu na análise dos relatórios de sustentabilidade publicados pelas empresas e baseados nas diretivas de relato propostas pelo Global Reporting Initiative. A amostra para o estudo abrangeu um total de 85 empresas de diferentes dimensões de 36 sectores económicos e representando 36 países de 5 continentes. A análise dos resultados foi feita utilizando diversos métodos de análise de dados (de frequência e de conteúdo) e análises estatísticas (análise de contingência, variância e de correspondências múltiplas) que permitiram observar as relações entre as dimensões do Triple Bottom Line, dando lugar à construção de uma matriz de relações híbridas. Seguidamente foi realizada uma análise longitudinal de uma das empresas da amostra tendo como referência a matriz híbrida obtida, assim como a tipificação da empresa no âmbito da sustentabilidade. Os resultados alcançados nas diferentes fases indicam que o enquadramento teórico que foi utilizado é útil para a análise das interseções entre as dimensões e permite uma avaliação dirigida a fatos ocorridos entre pares dimensionais, bem como projetar análises e posicionamentos futuros. Os resultados obtidos sugerem que a proposta apresentada é útil e deverá ser utilizada e desenvolvida noutros contextos. Esta tese contribui para a ideia de que a responsabilidade corporativa não deve ser só vista e operacionalizada como uma realidade de dimensões segmentadas mas também deve ser observada como um conjunto possível de interações que se manifestam nas interseções das suas diferentes dimensões.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

Improving silicon probe performance through layer-by-layer coating

Fully comprehending brain function, as the scale of neural networks, will only be possi-ble with the development of tools by micro and nanofabrication. Regarding specifically silicon microelectrodes arrays, a significant improvement in long-term performance of these implants is essential. This project aims to create a silicon microelectrode coating that provides high-quality electrical recordings, while limiting the inflammatory response of chronic implants. To this purpose, a combined chitosan and gold nanoparticles coating was produced allied with electrodes modification by electrodeposition with PEDOT/PSS in order to reduce the im-pedance at 1kHz. Using a dip-coating mechanism, the silicon probe was coated and then charac-terized both morphologically and electrochemically, with focus on the stability of post-surgery performance in anesthetized rodents. Since not only the inflammatory response analysis is vital, the electrodes recording degradation over time was also studied. The produced film presented a thickness of approximately 50 μm that led to an increase of impedance of less than 20 kΩ in average. On a 3 week chronic implant, the impedance in-crease on the coated probe was of 641 kΩ, compared with 2.4 MΩ obtained for the uncoated probe. The inflammatory response was also significantly reduced due to the biocompatible film as proved by histological tests.

Field-effect transistors based on Zinc oxide nanoparticles

This work reports the development of field-effect transistors (FETs), whose channel is based on zinc oxide (ZnO) nanoparticles (NPs). Using screen-printing as the primary deposition technique, different inks were developed, where the semiconducting ink is based on a ZnO NPs dispersion in ethyl cellulose (EC). These inks were used to print electrolyte-gated transistors (EGTs) in a staggered-top gate structure on glass substrates, using a lithium-based polymeric electrolyte. In another approach, FETs with a staggered-bottom gate structure on paper were developed using a sol-gel method to functionalize the paper’s surface with ZnO NPs, using zinc acetate dihydrate (ZnC4H6O4·2H2O) and sodium hydroxide (NaOH) as precursors. In this case, the paper itself was used as dielectric. The various layers of the two devices were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetric analyses (TG-DSC). Electrochemical impedance spectroscopy (EIS) was used in order to evaluate the electric double-layer (EDL) formation, in the case of the EGTs. The ZnO NPs EGTs present electrical modulation for annealing temperatures equal or superior to 300 ºC and in terms of electrical properties they showed On/Off ratios in the order of 103, saturation mobilities (μSat) of 1.49x10-1 cm2(Vs)-1 and transconductance (gm) of 10-5 S. On the other hand, the ZnO NPs FETs on paper exhibited On/Off ratios in the order of 102, μSat of 4.83x10- 3 cm2(Vs)-1and gm around 10-8 S.

Analysis and Treatment of a male portrait in oil and a study of the size layer with reconstructions from Vibert’s recipe (1892)

This thesis project concentrated on both the study and treatment of an early 20th century male portrait in oil from Colecção Caixa Geral de Depósitos, Lisbon, Portugal. The portrait of Januário Correia de Almeida, exhibits a tear (approximately 4.0 cm by 2.3 cm) associated with paint loss on the right upper side, where it is possible to observe an unusually thick size layer (approximately 50 microns) and an open weave mesh canvas. Size layers made from animal glue remain subject to severe dimensional changes due to changes in relative humidity (RH), thereby affecting the stability of the painting. In this case, the response to moisture of the size layer is minimal and the painting is largely uncracked with very little active flaking. This suggests that the size layer has undergone pre-treatment to render it unresponsive to moisture or water. Reconstructions based on late nineteenth century recipes using historically appropriate materials are used to explore various options for modifying the characteristics of gelatine, some of which may relate to the Portrait’s size layer. The thesis is separated into two parts: Part 1: Describes the history, condition, materials and techniques of the painting. It also details the treatment of Januário Correia de Almeida as well as the choices made and problems encountered during the treatment. Part 2: Discusses the history of commercial gelatine production, the choice of the appropriate animal source to extract the collagen to produce reconstructions of the portrait’s size layer as well as the characterization of selected reconstructions. The execution of a shallow textured infill led to one publication and one presentation: Abstract accepted for presentation and publication, International Meeting on Retouching of Cultural Heritage (RECH3), Francisco Brites, Leslie Carlyle and Raquel Marques, ‘’Hand building a Low Profile Textured Fill for a Large Loss’’.