Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Evolution of Diplodocid Sauropod dinosaurs with emphasis on specimens from Howe Ranch, Wyoming (USA)

Diplodocidae are among the best known sauropod dinosaurs. Several species were described in the late 1800s or early 1900s. Since then, numerous additional specimens were recovered in the USA, Tanzania, Portugal, as well as possibly Spain, England, and Asia. To date, the clade includes about 12 to 15 different species, some of them with questionable taxonomic status (e.g. ‘Diplodocus’ hayi or Dyslocosaurus polyonychius). However, intrageneric relationships of the multi-species, iconic genera Apatosaurus and Diplodocus are still poorly known. The way to resolve this issue is a specimen-based phylogenetic analysis, which was done for Apatosaurus, but is here performed for the first time for the entire clade of Diplodocidae. New material from different localities and stratigraphic levels on the Howe Ranch (Shell,Wyoming, USA) sheds additional light on the evolution of Diplodocidae. Three new specimens are described herein, considerably increasing our knowledge of the anatomy of the group. The new specimens (SMA 0004, SMA 0011, and SMA 0087) represent two, to possibly three new diplodocid species. They preserve material from all parts of the skeleton, including two nearly complete skulls, as well as fairly complete manus and pedes, material which is generally rare in diplodocids. Thereby, they considerably increase anatomical overlap between the sometimes fragmentary holotype specimens of the earlier described diplodocid species, allowing for significant results in a specimenbased phylogenetic analysis. Furthermore, clavicles and interclavicles are identified, the latter for the first time in dinosaurs. Their presence seems restricted to early sauropods, flagellicaudatans, and early Macronaria, and might thus be a retained plesiomorphy, with the loss of these bones being synapomorphic for Titanosauriformes and possibly Rebbachisauridae. The new material allows to test previous hypotheses of diplodocid phylogeny. In order to do so, any type specimen previously proposed to belong to Diplodocidae was included in the study, as are relatively complete referred specimens, in order to increase the degree of overlapping material. For specimens subsequently suggested to be non-diplodocid sauropods, their hypothesized sister taxa were included as outgroups. The current phylogenetic analysis thus includes 76 operational taxonomic units, 45 of which belong to Diplodocidae. The specimens were scored for 477 morphological characters, representing one of the most extensive phylogenetic analyses done within sauropod dinosaurs. The resulting cladogram recovers the classical arrangement of diplodocid relationships. Basing on a newly developed numerical approach to reduce subjectivity in the decision of specific or generic separation, species that have historically been included into well-known genera like Apatosaurus or Diplodocus, were detected to be actually generically different. Thereby, the famous genus Brontosaurus is resuscitated, and evidence further suggests that also Elosaurus parvus (previously referred to Apatosaurus) or ‘Diplodocus’ hayi represent unique genera. The study increases our knowledge about individual variation, and helps to decide how to score multi-species genera. Such a specimen-based phylogenetic analysis thus proves a valuable tool to validate historic species in sauropods, and in paleontology as a whole.

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Estudo da influência de chapas de ligação com cavilha na resistência à encurvadura de colunas de aço de secção tubular circular

Neste trabalho estuda-se a resistência à encurvadura (compressão uniforme) de tubos de aço de secção circular, com extremidades rotuladas por meio de cavilhas, tendo em conta a influência da chapa de ligação (gusset plate na designação em língua inglesa). Para o efeito, estuda-se uma ligação-tipo comum com chapa soldada e efetuam-se estudos paramétricos, recorrendo a modelos de elementos finitos de casca, para determinar a influência da chapa na (i) carga crítica e na (ii) carga de colapso do elemento. Os resultados mostram que a influência da chapa não pode ser desprezada para valores reduzidos da esbelteza do elemento. Propõe-se um método expedito e preciso para determinar a carga crítica tendo em conta a influência da chapa.

Usefulness of zebrafish model to assess glomerular and tubular alterations induced by tenofovir

Tenofovir (TFV) is one of the most used antiretroviral drugs. However, it is associated with tubular damage with mitochondria as a possible target. Tubulopathy precedes glomerular dysfunction, thus classic markers of renal function like the glomerular filtration rate (GFR) do not detect early TFV damage. Prediction and management of drug induced renal injury (DIRI) rely on the mechanisms of the drug insult and in optimal animal models to explore it. Zebrafish (Danio rerio) offers unique advantages for assessing DIRI, since the pronephros is structurally very similar to its human counterpart and is fully developed at 3.5 days postfertilization. The main aim of the present work was to evaluate the effects of TFV, as well as its pro-drug, tenofovir disoproxil fumarate (TDF), on the GFR and in mitochondria morphology in tubular cells of zebrafish larvae. Lethality curves were performed to understand the relationship between drug concentration and lethality. LC10 was selected to explore the renal function using the FITC-inulin assay and to analyze the mitochondrial toxicity by electron microscopy on larvae exposed to TDF, TFV, paracetamol and gentamicin (positive controls) or water (negative control). Lethality curves showed that gentamicin was the most lethal drug, followed by TDF, TFV and paracetamol. Gentamicin and paracetamol decreased the GFR, but no differences were found for either TDF or TFV, when compared to controls (%FITC Control = 33±8; %FITC TDF = 35±10; %FITC TFV = 30±10; %FITC Gentamicin = 46±17; %FITC Paracetamol = 83±14). Tubular mitochondria from treated larvae were notably different from non-treated larvae, showing swelling, irregular shapes, decreased mitochondria network, cristae disruption and loss of matrix granules. These results are in agreement with the effects of these drugs in humans and thus, demonstrate that zebrafish larvae can be a good model to assess the functional and structural damage associated with DIRI.