The role of objects in creative collaborations

Objects matter when professionals collaborate to create new products. Chapter 1 explains the intention of this work, to apply theories on objects in the empirical context of fashion design. Chapter 2 addresses the question of how creative professionals learn about and use strategy tools to turn their artistic fame into a commercial success. For Chapter 3 I collected ethnographic data on the development of a seasonal collection from the idea to the presentation at Fashion Week. The result is a deep insight into the collaborative processes and material objects used when a stable team of designers works with several outside experts. Chapter 4 applies the knowledge of the role of objects in fashion design gained during the ethnography in the context of online co-creation and crowd sourced fashion items. The synthesis of the empirical studies allows me to present the conceptual leap in Chapter 5. In the theoretical essay I review the findings on the role of objects in collaborations in relation to practice theory, present the new concept of the comprehensive object and conclude by stating the possibilities for future research.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

The patient safety journey in Portugal : challenges and opportunities from a public health perspective

ABSTRACT - Despite improvements in healthcare interventions, the incidence of adverse events and other patient safety problems constitutes a major contributor to the global burden of diseases and a concern for Public Health. In the last years there have been some successful individual and institutional efforts to approach patient safety issues in Portugal, unless such effort has been fragmented or focused on specific small areas. Long-term and global improvement has remained elusive, and most of all the improvement of patient safety in Portugal, must evaluate not only the efficacy of a change but also what was effective for implementing the change. Clearly, patient safety issues result from various combinations of individual, team, organization, system and patient factors. A systemic and integrated approach to promote patient safety must acknowledge and strive to understand the complexity of work systems and processes in health care, including the interactions between people, technology, and the environment. Safety errors cannot be productively attributed to a single human error. Our objective with this paper is to provide a brief overview of the status quo in patient safety in Portugal, highlighting key aspects that should be taken into account in the design of a strategy for improving patient safety. With these key aspects in mind, policy makers and implementers can move forward and make better decisions about which changes should be made and about the way the needed changes to improve patient safety should be implemented. The contribution of colleagues that are international leaders on healthcare quality and patient safety may also contribute to more innovative research methods needed to create the knowledge that promotes less costly successful changes.---- ---------------------- RESUMO – As questões relacionadas com a Segurança do Doente, e em particular, com a ocorrência de eventos adversos tem constituído, de há uns tempos a esta parte, uma crescente preocupação para as organizações de saúde, para os decisores políticos, para os profissionais de saúde e para os doentes/utentes e suas famílias, sendo por isso considerado um problema de Saúde Pública a que urge dar resposta. Em Portugal, nos últimos anos, têm sido desenvolvidos esforços baseados, maioritariamente, em iniciativas isoladas, para abordar os aspectos da Segurança do Doente. O facto de essas iniciativas não serem integradas numa estratégia explícita e de dimensão regional ou nacional, faz com que os resultados sejam parcelares e tenham visibilidade reduzida. Paralelamente, a melhoria da qualidade dos cuidados de saúde (a longo prazo) resultante dessas iniciativas tem sido esparsa e nem sempre a avaliação tem sido feita tendo em conta critérios de efectividade e de eficiência. A Segurança do Doente resulta da interacção de diversos factores relacionados, por um lado, com o doente e, por outro, com a prestação de cuidados que envolvem elementos de natureza individual (falhas activas) e organizacional/estrutural (falhas latentes). Devido à multifactorialidade que está na base de «problemas/falhas» na Segurança do Doente, qualquer abordagem a considerar deve ser sistémica e integrada. Simultaneamente, tais abordagens devem contemplar a compreensão da complexidade dos sistemas e dos processos de prestação de cuidados de saúde e as suas interdependências (envolvendo aspectos individuais, tecnológicos e ambientais). O presente trabalho tem por objectivo reflectir sobre o «estado da arte» da Segurança do Doente em Portugal, destacando os elementos-chave que se consideram decisivos para uma estratégia de acção nesse domínio. Com esses elementos os responsáveis pela governação da saúde poderão valorizar os aspectos que consideram decisivos para uma política de Segurança do Doente mais eficaz. A contribuição de quatro colegas internacionalmente reconhecidos como líderes na área da Qualidade em Saúde e da Segurança do Doente, constitui, por certo, uma oportunidade ímpar para a identificação e discussão de alguns dos principais desafios, ameaças e oportunidades que s

An Exploratory Study Of Lean Construction in Portugal – Owners and Designers`Perspectives

21th Annual Conference of the International Group for Lean Construction (IGLC 21), July 2013, Fortaleza, Brazil

Body and transcendence in Virginia Woolf and Clarice Lispector = Corpo e transcendência em Virgínia Woolf e Clarice Lispector

Virginia Woolf and Clarice Lispector belong to quite different historical, political and cultural contexts. Beyond its antecedents and roots in European modernism, Brazilian modernism developed according to peculiar patterns and lines, cultivating, for example, more clearly political, nationalist and regionalist tendencies than happened in the British area. Molly Hite’s essay “Virginia Woolf’s Two Bodies” suggests the existence of two kinds of body represented and perhaps experienced by Virginia Woolf: “one kind was the body for others, the body cast in social roles”, the other, the “visionary body”, a second physical presence, which brings into play new perspectives on the female modernist body and new strategies of political and aesthetic representation. It is this “visionary body”, that, in many moments, intersects with transcendence. These two kinds of body are also present in Clarice Lispector’s work, structured, of course, around other complexities and gradations, explained by a different temporal context, but still touching common seminal questions. In Lispector, it is through the body cast in social roles that you reach the “visionary body” and transcendence. The movement is not a flight, as in Woolf, on the contrary it is a necessity, a condition to get to the essence.

Enhancing physical activity coaching through personalized motivational strategies and self-adaptive goal-setting: development of self-adaptive processes in a monitoring and coaching smartphone application

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Glia-Motoneuron dialogue in ALS onset and progression in SOD1G93A-mice model

Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disease characterized by the pro-gressive loss of motoneurons (MN). Increasing evidence points glial cells as key players for ALS onset and progression. Indeed, MN-glia signalling pathways involving either neuroprotection or inflammation are likely to be altered in ALS. We aimed to study the molecules related with glial function and/or reactivity by evaluating glial markers and hemichannels, mainly present in astrocytes. We also studied molecules involved in mi-croglia-MN dialogue (CXCR3/CCL21; CX3CR1/CX3CL1; MFG-E8), as well as proliferation (Ki-67) and inflammatory-related molecules (TLR2/4, NLRP3; IL-18) and alarming/calming signals (HMGB1/autotaxin). We used lumbar spinal cord (SC) homogenates from mice expressing a mutant human-SOD1 protein (mSOD1) at presymptomatic and late-symptomatic ALS stages. SJL (WT) mice at same ages were used as controls. We observed decreased expression of genes associated with astrocytic (GFAP and S100B) and microglial (CD11b) markers in mSOD1 at the presymptomatic phase, as well as diminished levels of gap junction components pannexin1 and connexin43 and expression of Ki-67 and decreased autotax-in. In addition, microglial-MN communication was negatively affected in mSOD1 mice as well as in-flammatory response. Interestingly, we observed astrocytic (S100B) and microglial (CD11b) reactivity, increased proliferation (Ki-67) and increased autotaxin expression in symptomatic mSOD1 mice. In-creased MN-microglial dialogue (CXCR3/CCL21; CX3CR1/CX3CL1; MFG-E8) and hemichannel activ-ity, namely connexin43 and pannexin1, were also observed in mSOD1 at the symptomatic phase, along with an elevated inflammatory response as indicated by increased levels of HMGB1 and NLRP3. Our results suggest that decreased autotaxin expression is a feature of the presymptomatic stage, and precede the network of pro-inflammatory-related symptomatic determinants, including HMGB1, CCL21, CX3CL1, and NLRP3. The identification of the molecules and signaling pathways that are dif-ferentially activated along ALS progression will contribute for a better design of therapeutic strategies for disease onset and progression.

Uncertain Spaces: Virtual Configurations in Contemporary Art and Museums

Contém artigos apresentados na International Conference “Uncertain Spaces: Virtual Configurations in Contemporary Art and Museums”, na Fundação Calouste Gulbenkian (Lisboa), 31 Outubro - 1 de Novembro de 2014) de: Helena Barranha e Susana S. Martins - Introduction: Art, Museums and Uncertainty (pp.1-12); Alexandra Bounia e Eleni Myrivili - Beyond the ‘Virtual’: Intangible Museographies and Collaborative Museum Experiences (pp.15-32); Annet Dekker - Curating in Progress. Moving Between Objects and Processes (pp.33-54); Giselle Beiguelman - Corrupted Memories. The aesthetics of Digital Ruins and the Museum of the Unfinished (pp.55-82); Andrew Vaas Brooks - The Planetary Datalinks (pp.85-110); Sören Meschede - Curators’ Network: Creating a Promotional Database for Contemporary Visual Arts (pp.11-130); Stefanie Kogler - Divergent Histories and Digital Archives of Latin American and Latino Art in the United States – Old Problems in New Digital Formats (pp.131-156); Luise Reitstätter e Florian Bettel - Right to the City! Right to the Museum!(pp.159-182); Roberto Terracciano - On Geo-poetic systems: virtual interventions inside and outside the museum space (pp.183-210); e, Catarina Carneiro de Sousa e Luís Eustáquio - Art Practice in Collaborative Virtual Environments (pp.211-240).

Clinical practice guidelines in Portugal : quantitative and qualitative evaluation

RESUMO: Introdução As normas de orientação clínica são ferramentas úteis na translação de conhecimentos desde a investigação para a prática clínica diária. Estratégias ativas de implementação de normas de orientação clínica requerem elevado esforço organizacional e financeiro. Quando os recursos são escassos, as estratégias passivas podem ser a única opção de disseminação. Desde 2011 a Direção Geral da Saúde publicou cento e cinquenta e nove normas de orientação clínica. Nesta Tese é feita uma avaliação do impacto que estratégias de disseminação de normas de orientação clínica têm no padrão de prescrição dos médicos e uma avaliação qualitativa do processo das normas de orientação clínica em Portugal. Métodos: O primeiro artigo é um estudo quasi experimental usando uma série de análises temporais interrompida para comparar os níveis observados e esperados de prescrição de inibidores da ciclooxigenasa-2, antes e depois da publicação da norma de orientação clínica sobre a utilização de anti-inflamatórios não esteroides. O segundo estudo é um artigo de opinião e debate no qual numa primeira parte contextualiza o processo das normas da Direcção Geral da Saúde, na segunda parte aponta virtudes e defeitos no processo e a terceira parte constitui uma contribuição com vista à melhoria do processo. Discussão A produção de normas de orientação clínica requer metodologia rigorosa e complexa. A literatura médica revela que a translação de conhecimento é uma tarefa árdua. Estratégias de implementação ativas requerem recursos financeiros e organizacionais sólidos. Estratégias de implementação passivas podem representar uma solução aceitável se os recursos financeiros e organizacionais escasseiam. Pouco é conhecido sobre a eficácia destas estratégias fora do contexto de investigação. Com esta Tese pretendo contribuir para a clarificação desta resposta, outros países e instituições podem ver utilidade nesta informação, bem como pretendo contribuir para a discussão e melhoria do processo das normas de orientação clínica em Portugal. ------------------ ABSTRACT: Introduction Clinical practice guidelines can help address the failure to translate research findings into clinical practice. Active clinical practice guidelines implementation strategies require active efforts from organizations and are resource and financially demanding. Passive implementation strategies may represent the only option if resources are scarce. Out of research environment, real world efficacy of passive implementation strategies is still undetermined. Since 2011 the Portuguese General Health Directorate published one hundred and fifty nine guidelines. In this Thesis I evaluate the impact of passive dissemination of clinical practice guideline in clinician’s prescription behavior and review, from a qualitative point of view, the Portuguese clinical practice guideline process. Methods The first study is a quasi-experimental study using a retrospective interrupted time-series analysis design to compare the observed and expected prescription of cyclooxygenase-2 before and after the non steroidal antiinflammatory guideline publication. The second study is an opinion and debate article in which I firstly review the General Health Directorate guideline process. The second part states positive and negative aspects in the process and the third part is a contribution aimed at improving the process in the future. Discussion Clinical practice guidelines production demands a rigorous and complex methodology. medical iterature reveals that knowledge translation is a difficult task. Active implementation strategies demand solid financial and organizational resources. Passive implementation strategies may represent an acceptable solution if financial and organizational resources are scarce. Little is known about the efficacy of these strategies out of the research context. With this Thesis I intend to contribute to clarify this question, other countries and institutions with similar conditions may find this information useful, and also to contribute for the discussion and general improvement of national clinical practice guidelines process.

Genome-scale metabolic network reconstruction of Polaromonas sp. strain JS666: analysis of cDCE degradation rates and design of experiments for bioremediation improvement

Release of chloroethene compounds into the environment often results in groundwater contamination, which puts people at risk of exposure by drinking contaminated water. cDCE (cis-1,2-dichloroethene) accumulation on subsurface environments is a common environmental problem due to stagnation and partial degradation of other precursor chloroethene species. Polaromonas sp. strain JS666 apparently requires no exotic growth factors to be used as a bioaugmentation agent for aerobic cDCE degradation. Although being the only suitable microorganism found capable of such, further studies are needed for improving the intrinsic bioremediation rates and fully comprehend the metabolic processes involved. In order to do so, a metabolic model, iJS666, was reconstructed from genome annotation and available bibliographic data. FVA (Flux Variability Analysis) and FBA (Flux Balance Analysis) techniques were used to satisfactory validate the predictive capabilities of the iJS666 model. The iJS666 model was able to predict biomass growth for different previously tested conditions, allowed to design key experiments which should be done for further model improvement and, also, produced viable predictions for the use of biostimulant metabolites in the cDCE biodegradation.

Analysis and design of sinusoidal quadrature RC-oscillators

Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.

Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal