Development and validation of gold nanoprobes for human SNP detection towards commercial application

Conventional molecular techniques for detection and characterization of relevant nucleic acid (i.e. DNA) sequences are, nowadays, cumbersome, expensive and with reduced portability. The main objective of this dissertation consisted in the optimization and validation of a fast and low-cost colorimetric nanodiagnostic methodology for the detection of single nucleotide polymorphisms (SNPs). This was done considering SNPs associated to obesity of commercial interest for STAB VIDA, and subsequent evaluation of other clinically relevant targets. Also, integration of this methodology into a microfluidic platform envisaging portability and application on points-of-care (POC) was achieved. To warrant success in pursuing these objectives, the experimental work was divided in four sections: i) genetic association of SNPs to obesity in the Portuguese population; ii) optimization and validation of the non-cross-linking approach for complete genotype characterization of these SNPs; iii) incorporation into a microfluidic platform; and iv) translation to other relevant commercial targets. FTO dbSNP rs#:9939609 carriers had higher body mass index (BMI), total body fat mass, waist perimeter and 2.5 times higher risk to obesity. AuNPs functionalized with thiolated oligonucleotides (Au-nanoprobes) were used via the non-cross-linking to validate a diagnostics approach against the gold standard technique - Sanger Sequencing - with high levels of sensitivity (87.50%) and specificity (91.67%). A proof-of-concept POC microfluidic device was assembled towards incorporation of the molecular detection strategy. In conclusion a successful framework was developed and validated for the detection of SNPs with commercial interest for STAB VIDA, towards future translation into a POC device.

Development and validation of a risk model for prediction of hazardous alcohol consumption in general practice attendees : the PredictAL study

Background: Little is known about the risk of progression to hazardous alcohol use in people currently drinking at safe limits. We aimed to develop a prediction model (predictAL) for the development of hazardous drinking in safe drinkers. Methods: A prospective cohort study of adult general practice attendees in six European countries and Chile followed up over 6 months. We recruited 10,045 attendees between April 2003 to February 2005. 6193 European and 2462 Chilean attendees recorded AUDIT scores below 8 in men and 5 in women at recruitment and were used in modelling risk. 38 risk factors were measured to construct a risk model for the development of hazardous drinking using stepwise logistic regression. The model was corrected for over fitting and tested in an external population. The main outcome was hazardous drinking defined by an AUDIT score >= 8 in men and >= 5 in women. Results: 69.0% of attendees were recruited, of whom 89.5% participated again after six months. The risk factors in the final predictAL model were sex, age, country, baseline AUDIT score, panic syndrome and lifetime alcohol problem. The predictAL model's average c-index across all six European countries was 0.839 (95% CI 0.805, 0.873). The Hedge's g effect size for the difference in log odds of predicted probability between safe drinkers in Europe who subsequently developed hazardous alcohol use and those who did not was 1.38 (95% CI 1.25, 1.51). External validation of the algorithm in Chilean safe drinkers resulted in a c-index of 0.781 (95% CI 0.717, 0.846) and Hedge's g of 0.68 (95% CI 0.57, 0.78). Conclusions: The predictAL risk model for development of hazardous consumption in safe drinkers compares favourably with risk algorithms for disorders in other medical settings and can be a useful first step in prevention of alcohol misuse.

Validation of NASA rotor 67 with openFOAM's transonic density-based solver

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Validation of alternative additives for paste production

Dissertation presented to confer Master Degree in Chemical and Biochemical Engineering

Exploring the experience of stigma in severe mental illness : a Portuguese contribution to the validation of a psychometric instrument

RESUMO: Fizemos uma análise da evolução do conceito de estigma, das suas correlações e das suas consequências e analisámos os instrumentos psicométricos utilizados para estudar experiências pessoais de estigma. Revimos os principais estudos de investigação sobre estigma em Portugal. Revimos, igualmente, os estudos relevantes utilizando o “Consumer Experiences of Stigma Questionnaire” (CESQ) e as propriedades psicométricas já documentadas. O nosso estudo teve como objetivos: explorar as experiências de estigma numa amostra portuguesa de pessoas com perturbação mental grave e contribuir para a documentação das propriedades psicométricas do “Consumer Experiences of Stigma Questionnaire” e para a validação da sua versão portuguesa. Fizemos um estudo transversal, descritivo e analítico, recolhemos dados sociodemográficos e clínicos e medimos as experiências de estigma e o funcionamento global. A frequência das respostas da secção de estigma foi semelhante à dos restantes estudos utilizando a CESQ. A frequência das respostas na secção de discriminação foi ligeiramente inferior à reportada noutros estudos. Verificámos a existência de uma associação entre a pontuação da subescala de discriminação, o sexo masculino e o facto de se viver na comunidade. A pontuação da subescala de discriminação está também correlacionada de forma positiva com o funcionamento global. Os alfas de Cronbach para a CESQ e para as suas subescalas foram considerados bons. Os coeficientes de correlação intraclasse foram igualmente considerados igualmente bons. Utilizando técnicas de análise fatorial, verificámos que a maior parte dos itens da CESQ se enquadrava em dois fatores, correspondendo sensivelmente às subescalas definidas previamente. Concluímos que o presente estudo explorou com sucesso a questão do estigma em Portugal, contribuindo em simultâneo para a validação do “Consumer Experiences of Stigma Questionnaire.--------------ABSTRACT: We reviewed the evolution of concept of stigma, its correlates and consequences, and analysed psychometric instruments that were used to study personal experiences of stigma. We provided an insight over research of stigma in Portugal. We reviewed relevant studies that use Consumer Experiences of Stigma Questionnaire and documented psychometric properties of this instrument. Our study aimed both to explore experiences of stigma in a Portuguese sample of people with severe mental illness and to contribute to the assessment of the psychometric properties of Consumer Experiences of Stigma Questionnaire and to the validation of its Portuguese translation. We performed a cross sectional descriptive and analytic study, collected socio-demographic data and measured experiences of stigma and global functioning. Frequency of responses regarding stigma section of CESQ matched previous studies using that scale. Frequency of responses in discrimination section was slightly lower than previously reported studies. We found an association between the discrimination score of CESQ and both male gender and living in the community. The discrimination score also positively correlated with global functioning. Cronbach alphas for CESQ and its subscales were good. Intraclass correlation coefficients for CESQ and stigma subscale were also good. Using factor analysis we found most of the items in CESQ would fit 2 factors, grossly corresponding to the previously defined subscales. We conclude that this study successfully explored stigma in Portugal, contributing in simultaneous to the validation of Consumer Experiences Questionnaire.

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Proposal of a methodology for the design of the installation of turrets on aircrafts – the approach on the aerodynamic influences

The present work has its origin on the necessity of enabling a design certified company, or DOA (Design Organization Approval), to perform a modification; this modification is the installation of EO/IR (Electro-optical infrared) sensors on aircrafts. The subject of interest in this dissertation lies on the aerodynamic impact of the modification on the aircraft. The primary purpose of the present thesis is the creation of a methodology that regards the design stage of the modification. This methodology serves as guidance to the DOA design team that is assigned to the design of the modification. The methodology includes a recommendation to the certification of the modification; it contains a method intended to decide the location of the installation of the sensors on the aircraft; it also comprises of a design structure specifically adapted to the modification in study. Regarding the aerodynamic impact, it is studied the aerodynamic analysis’ tools, which allows one to relate the different stages of design to the most suited tools to each stage. A case study is performed with the purpose of not only validating the methodology which was created but also to giving a first approach to the preliminary design of the modification. As example, there are used the Lockheed Martin C-130 aircraft and the FLIR Star Safire III sensor.