17 resultados para Ussing chamber
Resumo:
In cataract surgery, the eye’s natural lens is removed because it has gone opaque and doesn’t allow clear vision any longer. To maintain the eye’s optical power, a new artificial lens must be inserted. Called Intraocular Lens (IOL), it needs to be modelled in order to have the correct refractive power to substitute the natural lens. Calculating the refractive power of this substitution lens requires precise anterior eye chamber measurements. An interferometry equipment, the AC Master from Zeiss Meditec, AG, was in use for half a year to perform these measurements. A Low Coherence Interferometry (LCI) measurement beam is aligned with the eye’s optical axis, for precise measurements of anterior eye chamber distances. The eye follows a fixation target in order to make the visual axis align with the optical axis. Performance problems occurred, however, at this step. Therefore, there was a necessity to develop a new procedure that ensures better alignment between the eye’s visual and optical axes, allowing a more user friendly and versatile procedure, and eventually automatizing the whole process. With this instrument, the alignment between the eye’s optical and visual axes is detected when Purkinje reflections I and III are overlapped, as the eye follows a fixation target. In this project, image analysis is used to detect these Purkinje reflections’ positions, eventually automatically detecting when they overlap. Automatic detection of the third Purkinje reflection of an eye following a fixation target is possible with some restrictions. Each pair of detected third Purkinje reflections is used in automatically calculating an acceptable starting position for the fixation target, required for precise measurements of anterior eye chamber distances.
Resumo:
This work presents the results of the experimental study of proton induced nuclear reactions in lithium, namely the 7Li(p,α) 4He, 6Li(p,α) 3He and 7Li(p,p)7Li reactions. The amount of 7Li and 6Li identified as primordial and observed in very old stars of the Milky Way galactic halo strongly deviates from the predictions of primordial nucleosynthesis and stellar evolution models which depend, among other factors, on the cross sections of reactions like 7Li(p,α) 4He and 6Li(p,α) 3He. These discrepancies have triggered a large amount of research in the fields of stellar evolution, cosmology, pre-galactic evolution and low energy nuclear reactions. Focusing on nuclear reactions, this work has measured the 7Li(p,α) 4He and 6Li(p,α) 3He reactions cross sections (expressed in terms of the astrophysical S -factor) with higher accuracy, and the electron screening effects in these reactions for different environments (insulators and metallic targets). The 7Li(p,α) 4He angular distributions were also measured. These measurementstook place in two laboratory facilities, in the framework of the LUNA (Laboratory for Undergroud Nuclear Astrophysics) international collaboration, namely the Laboratorio ´ de Feixe de Ioes ˜ in ITN (Instituto Tecnologico ´ e Nuclear) Sacavem, ´ Portugal, and the Dynamitron-TandemLaboratorium in Ruhr-Universitat¨ Bochum, Germany. The ITN target chamber was modified to measure these nuclear reactions, with the design and construction of new components, the addition of one turbomolecular pump and a cold finger. The 7Li(p,α) 4He and 6Li(p,α) 3He reactions were measured concurrently with seven and four targets, respectively. These targets were produced in order to obtain adequate and stable lithium depth profiles. In metallic environments, the measured electron screening potential energies are much higher than the predictions of atomic-physics models. The Debye screening model applied to the metallic conduction electrons is able to explain these high values. It is a simple model, but also very robust. Concerning primordial nucleosynthesis and stellar evolution models, these results are very important as they show that laboratory measurements are well controlled, and the model inputs from these cross sections are therefore correct. In this work the 7Li(p,p)7Li differential cross section was also measured, which is useful to describe the 7Li(p,α) 4He entrance channel.
Resumo:
The chemical and mineralogical charactetistics of the intrusive and extrusive rocks of this igneous complex are presented. The suggest affinities between these rocks. The major and the trace elements lead us to conclude that these rocks were originated in a common magmatic chamber by fractional crystallization.
Resumo:
Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.
Resumo:
Dissertação apresentada para a obtenção do grau de Doutor em Conservação e Restauro pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia
Resumo:
The chemical and mineralogical characteristics of the intrusive and extrusive rocks of this igneous complex are presented. The suggest affinities between these rocks. The major and the trace elements lead us to conclude that these rocks were originated in a common magmatic chamber by fractional crystallization.
Resumo:
Science of the total environment 405(2008) 278-285
Resumo:
Annals of Microbiology, 59 (4) 705-713 (2009)
Resumo:
Dissertação apresentada para obtenção do Grau de Doutor em Conservação e Restauro, especialidade de Ciências da Conservação, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia
Resumo:
Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina
Resumo:
Dissertação para obtenção do Grau de Doutor em Engenharia Física
Resumo:
This paper summarises the results of the first systematic, detailed prosopographic study of the MPs – the deputados of the Lower Chamber - of the First Portuguese Republic (1910-1926). Data are presented both by legislature and for the overall period. Two kinds of background variables are explored: sociodemographic (birthplace, age, education and profession) and political (previous experience in other elite positions). Regime change in 1910 resulted in the replacement of the former political elite by homines novi. Most MPs of the Republican regime were born in small towns and communities, had carried out higher educational studies (with prevalence for law training), were mainly drawn from the professions (practising lawyers and doctors) and the Army, and were elected for the first-time at relatively young ages. Parliamentary turnover was high (two-thirds of the representatives held just one mandate) and a large proportion of MPs had a consistent connection (birth, family ties, occupation) to the constituencies to which they had been elected.
Resumo:
Dissertação para obtenção do grau de Mestre em Genética Molecular e Biomedicina
Resumo:
The term res publica (literally “thing of the people”) was coined by the Romans to translate the Greek word politeia, which, as we know, referred to a political community organised in accordance with certain principles, amongst which the notion of the “good life” (as against exclusively private interests) was paramount. This ideal also came to be known as political virtue. To achieve it, it was necessary to combine the best of each “constitutional” type and avoid their worst aspects (tyranny, oligarchy and ochlocracy). Hence, the term acquired from the Greeks a sense of being a “mixed” and “balanced” system. Anyone that was entitled to citizenship could participate in the governance of the “public thing”. This implied the institutionalization of open debate and confrontation between interested parties as a way of achieving the consensus necessary to ensure that man the political animal, who fought with words and reason, prevailed over his “natural” counterpart. These premises lie at the heart of the project which is now being presented under the title of Res Publica: Citizenship and Political Representation in Portugal, 1820-1926. The fact that it is integrated into the centenary commemorations of the establishment of the Republic in Portugal is significant, as it was the idea of revolution – with its promise of rupture and change – that inspired it. However, it has also sought to explore events that could be considered the precursor of democratization in the history of Portugal, namely the vintista, setembrista and patuleia revolutions. It is true that the republican regime was opposed to the monarchic. However, although the thesis that monarchy would inevitably lead to tyranny had held sway for centuries, it had also been long believed that the monarchic system could be as “politically virtuous” as a republic (in the strict sense of the word) provided that power was not concentrated in the hands of a single individual. Moreover, various historical experiments had shown that republics could also degenerate into Caesarism and different kinds of despotism. Thus, when absolutism began to be overturned in continental Europe in the name of the natural rights of man and the new social pact theories, initiating the difficult process of (written) constitutionalization, the monarchic principle began to be qualified as a “monarchy hedged by republican institutions”, a situation in which not even the king was exempt from isonomy. This context justifies the time frame chosen here, as it captures the various changes and continuities that run through it. Having rejected the imperative mandate and the reinstatement of the model of corporative representation (which did not mean that, in new contexts, this might not be revived, or that the second chamber established by the Constitutional Charter of 1826 might not be given another lease of life), a new power base was convened: national sovereignty, a precept that would be shared by the monarchic constitutions of 1822 and 1838, and by the republican one of 1911. This followed the French example (manifested in the monarchic constitution of 1791 and in the Spanish constitution of 1812), as not even republicans entertained a tradition of republicanism based upon popular sovereignty. This enables us to better understand the rejection of direct democracy and universal suffrage, and also the long incapacitation (concerning voting and standing for office) of the vast body of “passive” citizens, justified by “enlightened”, property- and gender-based criteria. Although the republicans had promised in the propaganda phase to alter this situation, they ultimately failed to do so. Indeed, throughout the whole period under analysis, the realisation of the potential of national sovereignty was mediated above all by the individual citizen through his choice of representatives. However, this representation was indirect and took place at national level, in the hope that action would be motivated not by particular local interests but by the common good, as dictated by reason. This was considered the only way for the law to be virtuous, a requirement that was also manifested in the separation and balance of powers. As sovereignty was postulated as single and indivisible, so would be the nation that gave it soul and the State that embodied it. Although these characteristics were common to foreign paradigms of reference, in Portugal, the constitutionalization process also sought to nationalise the idea of Empire. Indeed, this had been the overriding purpose of the 1822 Constitution, and it persisted, even after the loss of Brazil, until decolonization. Then, the dream of a single nation stretching from the Minho to Timor finally came to an end.
Resumo:
This thesis explores the development and employment of microfluidic devices as a tool for studying the effect of the surrounding environment on embryonic stem cells during the migration phenomena. Different single-cell microchips were designed and manufactured to study mouse embryonic fibroblasts (MEFs) migration towards an environmental variation (increase of serum concentration in the culture medium) that was expected to function as a motility stimuli. Considering the experimental, cells were injected into the microchips chambers and individually isolated by dedicated cell traps with view to a single-cell analysis. Once fribroblasts were attached to the surface, culture medium with an increased serum level was subsequently injected in an adjacent chamber to promote the formation of a serum concentration gradient. The gradient established between the chambers could be sensed by the fibroblasts and thus triggered the cells mobilization towards and in the direction of the richer serum medium. Additionally, the experiment allowed the observation of MEFs’ structural reorganization when migrating through micro-tunnels containing widths below the cell size, suggesting a cytoskeleton rearrangement on account of the nutritional stimulus introduced. Furthermore, results indicate that fibronectin promotes MEFs adhesion to the substrate and that MEFs migration is characterized as haptotactic.