MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Strategies for the enhancement of the catalytic performance of cutinase in nonaqueous media

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Enhancement of an implemented rating model and impact on existing risk management processes: A hands-on approach from financial supplier risk management within the automotive industry

The purpose of this paper is to conduct a methodical drawback analysis of a financial supplier risk management approach which is currently implemented in the automotive industry. Based on identified methodical flaws, the risk assessment model is further developed by introducing a malus system which incorporates hidden risks into the model and by revising the derivation of the most central risk measure in the current model. Both methodical changes lead to significant enhancements in terms of risk assessment accuracy, supplier identification and workload efficiency.

High-performance flexible hybrid field-effect transistors based on cellulose fiber paper

IEEE Electron Device Letters, VOL. 29, NO. 9,

The impact of CdSe/ZnS Quantum Dots in cells of Medicago sativa in suspension culture

Abstract Background: Nanotechnology has the potential to provide agriculture with new tools that may be used in the rapid detection and molecular treatment of diseases and enhancement of plant ability to absorb nutrients, among others. Data on nanoparticle toxicity in plants is largely heterogeneous with a diversity of physicochemical parameters reported, which difficult generalizations. Here a cell biology approach was used to evaluate the impact of Quantum Dots (QDs) nanocrystals on plant cells, including their effect on cell growth, cell viability, oxidative stress and ROS accumulation, besides their cytomobility. Results: A plant cell suspension culture of Medicago sativa was settled for the assessment of the impact of the addition of mercaptopropanoic acid coated CdSe/ZnS QDs. Cell growth was significantly reduced when 100 mM of mercaptopropanoic acid -QDs was added during the exponential growth phase, with less than 50% of the cells viable 72 hours after mercaptopropanoic acid -QDs addition. They were up taken by Medicago sativa cells and accumulated in the cytoplasm and nucleus as revealed by optical thin confocal imaging. As part of the cellular response to internalization, Medicago sativa cells were found to increase the production of Reactive Oxygen Species (ROS) in a dose and time dependent manner. Using the fluorescent dye H2DCFDA it was observable that mercaptopropanoic acid-QDs concentrations between 5-180 nM led to a progressive and linear increase of ROS accumulation. Conclusions: Our results showed that the extent of mercaptopropanoic acid coated CdSe/ZnS QDs cytotoxicity in plant cells is dependent upon a number of factors including QDs properties, dose and the environmental conditions of administration and that, for Medicago sativa cells, a safe range of 1-5 nM should not be exceeded for biological applications.

Meta-analysis of gender and science research - Country report - Portugal

In Portugal, especially starting in the 1970s, women’s studies had implications on the emergency of the concept of gender and the feminist criticism to the prevailing models about differences between sexes. Until then, women had been absent from scientific research both as subject and as object. Feminism brought more reflexivity to the scientific thinking. After the 25th of April 1974, because of the consequent political openness, several innovating themes of research emerged, together with new concepts and fields of study. However, as far as gender and science relationship is concerned, such studies especially concentrate on higher education institutions. The feminist thinking seems to have two main objectives: to give women visibility, on the one hand, and to denunciate men’s domain in the several fields of knowledge. In 1977, the “Feminine Commission” is created and since then it has been publishing studies on women’s condition and contributing to the enhancement of the reflection of female condition at all levels. In the 1980s, the growing feminisation of tertiary education (both of students and academics), favoured the development of women’s studies, especially on their condition within universities with a special focus on the glass ceiling, despite the lack of statistical data by gender, thus making difficult the analysis of women integration in several sectors, namely in educational and scientific research activities. Other agglutinating themes are family, social and legal condition, work, education, and feminine intervention on political and social movements. In the 1990s, Women Studies are institutionalised in the academic context with the creation of the first Master in Women Studies in the Universidade Aberta (Open University), in Lisbon. In 1999, the first Portuguese journal of women studies is created – “Faces de Eva”. Seminars, conferences, thesis, journals, and projects on women’s studies are more and more common. However, results and publications are not so divulgated as they should be, because of lack of comprehensive and coordinated databases. 2. Analysis by topics 2.1. Horizontal and vertical segregation Research questions It is one of the main areas of research in Portugal. Essentially two issues have been considered: - The analysis of vertical gender segregation in educational and professional fields, having reflexes on women professional career progression with special attention to men’s power in control positions and the glass ceiling. - The analysis of horizontal segregation, special in higher education (teaching and research) where women have less visibility than men, and the under-representation of women in technology and technological careers. Research in this area mainly focuses on description, showing the under-representation of women in certain scientific areas and senior positions. Nevertheless, the studies that analyze horizontal segregation in the field of education adopt a more analytical approach which focuses on the analysis of the mechanisms of reproduction of gender stereotypes, especially socialisation, influencing educational and career choices. 1

Software languages engineering: experimental evaluation

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Informática

Service-oriented mobility of java code in web services-based architectures

Dissertação apresentada na Faculdade de Ciências e Tecnologias da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

New analytical methodologies for doping control – detection of anabolic androgenic steroids in human urine

Dissertation submitted to Faculdade de Ciências e Tecnologia - Universidade Nova de Lisboa in fulfilment of the requirements for the degree of Doctor of Philosophy (Biochemistry - Biotechnology)

Mechanism of interleukin-8 induction by human cytomegalovirus UL76 protein

Dissertation presented to obtain the Ph.D degree in Biology

Compositional and functional analysis of polycomb target chromatin

Dissertation presented to obtain the Ph.D degree in Molecular Biology

Gd(III) chelates as NMR probes of protein-protein interactions. Case study: rubredoxin and cytochrome c3

Inorganic Chemistry 50(21):10600-7

An NMR structural study of nickel-substituted rubredoxin

J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6

Production of aluminium based composites reinforced with embedded NiTi by friction stir welding

Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica