Target-specific multiphysics modeling for thermal medicine applications

Dissertation to obtain the degree of Doctor of Philosophy in Biomedical Engineering

Understanding the microbial ecology and ecophysiology of enhanced biological phosphorus removal processes through metabolic modelling and experimental studies

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Conception and first results of a cross-sectional national study on the demography, disease characteristics and socioeconomics status of the Portuguese patients with multiple sclerosis : the PORT-MS study

RESUMO: Introdução e objetivos: Não existia um estudo multicêntrico que descrevesse as características dos doentes com EM, da doença em si, ou do seu tratamento, em Portugal.Métodos: Doentes McDonald 2010 positivos foram sequencialmente recrutados em 7 centros entre Maio e Novembro 2014. Aplicou-se um Caderno de Recolha de Dados incidindo na demografia, doença, educação e emprego (estudo PORT-MS). Resultados: 561 doentes incluídos. Primeiros sintomas aos 30,2±10,5 anos (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnóstico 3,2±5,3 anos depois (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); tempo de doença após diagnóstico 9,4±7,2 anos (semelhante RRMS no diagnóstico e PPMS); idade atual 42,9±12,4 anos (grupo RRMS no diagnóstico 42,0±12,1, PPMS 52,5±11,3, p<0,001); EDSS atual 2,5 (RRMS 2.0, PPMS 6.0); proporção feminino:masculino é 2,5:1 (RRMS semelhante, PPMS 1,1:1, p<0,05); no diagnóstico RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% dos RRMS encontravam-se em SP na inclusão (nomeadamente os com mais idade no diagnóstico e/ou atualidade ou tempo de doença mais prolongado). PPMS mais frequente em doentes diagnosticados mais tardiamente (p<0,001), onde aumenta também ligeiramente a proporção de mulheres na PPMS. Nas últimas décadas: novos casos mostram estabilidade na proporção de géneros e tipos de doença; idade nos primeiros sintomas e no diagnóstico aumentou ligeiramente, tempo entre eles diminuiu ligeiramente. Proporção sob DMT (Maio 2014): global 84,5%; atualmente RRMS 90,4%; SPMS 70,8%; PPMS 36,8%; progressivas agregadas 48%. Tipo de DMT, amostra global: interferões 56,5%, GA 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Global: economicamente ativos 61,5%, desemprego 13,5%, 74,1% dos não activos estão reformados por doença. Gravidezes após diagnóstico em 15% mulheres. Casos com história familiar positiva 7,8%. Discussão e conclusões: Incluída cerca de 10% da população portuguesa. Resultados congruentes com dados internacionais. Elevada proporção sob DMT, mesmo EDSS alto e formas progressivas. Terapêuticas de segunda linha sub representadas. Doentes jovens e com doença ligeira com vida económica ativa; restantes essencialmente reformados por doença.---------------- ABSTRACT : Background/aims: In Portugal, there wasn’t a multicentric study on the general characteristics (demography, disease milestones, DMT, socioeconomic status) of Multiple Sclerosis patients. Methods: Patients fulfilling McDonald 2010 criteria were sequentially recruited from May to November 2014 in 7 centers and data was systematically collected. Results: 561 patients included. First symptoms occurred at 30,2±10,5 years-old (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnosis 3,2±5,3 years later (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); 9,4±7,2 years elapsed since diagnosis (similar for those is RRMS at diagnosis and PPMS); current age 42,9±12,4 years-old (group RRMS at diagnosis 42,0±12,1, PPMS 52,5±11,3, p<0,001); current EDSS 2,5 (RRMS 2.0, PPMS 6.0); females to males 2,5:1 (RRMS similar, PPMS 1,1:1, p<0,05); at diagnosis RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% of RRMS reached SP at inclusion (those older at diagnosis, in actuality, or with longer follow-up). PPMS more frequente in patients diagnosed at older ages (p<0,001), also slight increase in females. Along the last decades: new cases have showed stable proportions of gender and disease types; age at first symptoms and diagnosis slightly increased, time between them slightly decreased. Proportion on DMT (May 2014): 84,5% of all; 90,4% of currently in RRMS; 70,8% of SPMS; 36,8% of PPMS; 48% of progressive forms together. Type of DMT, all patients: interferons 56,5%, Glatiramer Acetate 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Economically active 61,5% of all, unemployment 13,5%, 74,1% of non-active are retired due to disease. Females pregnant after diagnosis 15%. Positive family cases in 7,8%. Discussion/Conclusions: 10% of the national MS population collected. Data generally consistente with international reports. Proportion under DMT relatively high in all disease types, but second line therapies underrepresented. Young patients with mild disease have an active economic life. Those not active are essentially retired due to disease.

The thermal effects on the methanol-to-olefins reaction: A modelling and experimental approach

With the projection of an increasing world population, hand-in-hand with a journey towards a bigger number of developed countries, further demand on basic chemical building blocks, as ethylene and propylene, has to be properly addressed in the next decades. The methanol-to-olefins (MTO) is an interesting reaction to produce those alkenes using coal, gas or alternative sources, like biomass, through syngas as a source for the production of methanol. This technology has been widely applied since 1985 and most of the processes are making use of zeolites as catalysts, particularly ZSM-5. Although its selectivity is not especially biased over light olefins, it resists to a quick deactivation by coke deposition, making it quite attractive when it comes to industrial environments; nevertheless, this is a highly exothermic reaction, which is hard to control and to anticipate problems, such as temperature runaways or hot-spots, inside the catalytic bed. The main focus of this project is to study those temperature effects, by addressing both experimental, where the catalytic performance and the temperature profiles are studied, and modelling fronts, which consists in a five step strategy to predict the weight fractions and activity. The mind-set of catalytic testing is present in all the developed assays. It was verified that the selectivity towards light olefins increases with temperature, although this also leads to a much faster catalyst deactivation. To oppose this effect, experiments were carried using a diluted bed, having been able to increase the catalyst lifetime between 32% and 47%. Additionally, experiments with three thermocouples placed inside the catalytic bed were performed, analysing the deactivation wave and the peaks of temperature throughout the bed. Regeneration was done between consecutive runs and it was concluded that this action can be a powerful means to increase the catalyst lifetime, maintaining a constant selectivity towards light olefins, by losing acid strength in a steam stabilised zeolitic structure. On the other hand, developments on the other approach lead to the construction of a raw basic model, able to predict weight fractions, that should be tuned to be a tool for deactivation and temperature profiles prediction.

Wideband CMOS low noise amplifiers

Modern fully integrated receiver architectures, require inductorless circuits to achieve their potential low area, low cost, and low power. The low noise amplifier (LNA), which is a key block in such receivers, is investigated in this thesis. LNAs can be either narrowband or wideband. Narrowband LNAs use inductors and have very low noise figure, but they occupy a large area and require a technology with RF options to obtain inductors with high Q. Recently, wideband LNAs with noise and distortion cancelling, with passive loads have been proposed, which can have low NF, but have high power consumption. In this thesis the main goal is to obtain a very low area, low power, and low-cost wideband LNA. First, it is investigated a balun LNA with noise and distortion cancelling with active loads to boost the gain and reduce the noise figure (NF). The circuit is based on a conventional balun LNA with noise and distortion cancellation, using the combination of a common-gate (CG) stage and common-source (CS) stage. Simulation and measurements results, with a 130 nm CMOS technology, show that the gain is enhanced by about 3 dB and the NF is reduced by at least 0.5 dB, with a negligible impact on the circuit linearity (IIP3 is about 0 dBm). The total power dissipation is only 4.8 mW, and the active area is less than 50 x 50 m2 . It is also investigated a balun LNA in which the gain is boosted by using a double feedback structure.We propose to replace the load resistors by active loads, which can be used to implement local feedback loops (in the CG and CS stages). This will boost the gain and reduce the noise figure (NF). Simulation results, with the same 130 nm CMOS technology as above, show that the gain is 24 dB and NF is less than 2.7 dB. The total power dissipation is only 5.4 mW (since no extra blocks are required), leading to a figure-of-merit (FoM) of 3.8 mW

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).