In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Description de restes squelettiques de Latidae: Lates (?) sp. (Poissons téléostéens, Percoidei) du Miocène inférieur et moyen du bassin du Bas Tage (environs de Lisbonne, Portugal)

Several Lower and Middle Miocene localities in the Lower Tagus basin near Lisbon yielded Latidae fragmentary remnants. No really decisive character has been recognized that would allow us to state these remnants could surely be ascribed to the genus Lates Cuv. & Val., although we regard this as nearly certain. There are some differences between the Miocene latidae under study and the type species Lates niloticus L. this suggests us to report the concerned remnants to a Lates (?) sp. that could belong to a new, hitherto undescribed species. The occurrence of Lates in fluviatile or lagoonal beds in the Lower Tagus basin Miocene series is not at all surprising under a paleoeciological view point. Even less if account is taken of the presence in the same levels of Siluriforms remnants belonging to Bagridae and Ariidae, two families that are well represented in Africa. Bagrid spines have been found at Quinta das Pedreiras in association with Lates (?) sp. remnants. The Lates (?) sp. discovery in the Lower and Middle Miocene from the Lower Tagus basin results in extending to the West this genus' biogeographic distribution. It is indeed the first discovery of this genus on Europe's Atlantic coasts. No matter which was the geographic origin of these fishes, they had to migrate several hundreds of kilometers through marine waters before entering the Tagus' estuary. The association of Lates (?) sp. remnants with Siluriform ones that have an extant, broad repartition in Africa south of the Sahara points out to an African origin. These thermophyll fishes imigration along the Atlantic coasts from lberian Peninsula probably has been possible owing to a warm climatic event that allowed them to migrate ca. 5 degrees (in latitude) northwards in Burdigalian times.

Laser welding of shape memory alloys

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Vibration control with shape-memory alloys in civil engineering structures

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Doutor em Engenharia Civil

Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Advanced instrumentation for superheated liquid detectors in dark matter searches

Dissertação para obtenção do Grau de Doutor em Engenharia Física

Glasses' makeup: the simple and the combined effect of color and shape on perceived volume and beverage intake

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Evolution of Teeth and Quadrate in Non-avian Theropoda (Dinosauria: Saurischia), with the Description of Torvosaurus Remains from Portugal

Theropods form a highly successful and morphologically diversified group of dinosaurs that gave rise to birds. They include most, if not all, carnivorous dinosaurs, yet many theropod clades were secondarily adapted to piscivory, omnivory and herbivory, and theropods show a large array of skull and dentition morphologies. This work aims to investigate aspects of the evolution of theropod dinosaurs by analyzing in detail both the anatomy and ontogeny of teeth and quadrates in non-avian theropods, and by studying embryonic and adult material of a new species of theropod. A standardized list of terms and notations for each anatomical entity of the tooth, quadrate, and maxilla is here proposed with the goal of facilitating descriptions of these important cranial and dental elements. The distribution of thirty dental characters among 113 theropod taxa is investigated, and a list of diagnostic dental characters is proposed. As an example, four isolated theropod teeth from the Lourinhã Formation (Kimmeridgian‒Tithonian) of Portugal are described and identified based on a cladistic analysis performed on a data matrix of 141 dentition-based characters coded in 60 taxa. Two shed teeth are referred to an abelisaurid, providing the first record of Abelisauridae in the Jurassic of Laurasia and the one of the oldest records of this clade in the world, suggesting a possible radiation of Abelisauridae in Europe well before the Upper Cretaceous. The consensus tree resulting from this phylogenetic analysis, the most extensive on theropod teeth, indicates that theropod teeth provide reliable data for identification at approximately family level, and this method will help identifying theropod teeth with more confidence. A detailed description of the dentition of Megalosauridae is also provided, and a discriminant analysis performed on a dataset of numerical data collected on the teeth of 62 theropod taxa reveals that megalosaurid teeth are hardly distinguishable from other theropod clades with ziphodont dentition. This study highlights the importance of detailing anatomical descriptions and providing additional morphometric data on teeth with the purpose of helping to identify isolated theropod teeth. In order to evaluate the phylogenetic potential and investigate the evolutionary transformations of the quadrate, a phylogenetic morphometric analysis as well as a cladistic analysis using 98 discrete quadrate related characters were conducted. The quadrate morphology by its own provides a wealth of data with strong phylogenetic signal, and the phylogenetic morphometric analysis reveals two main morphotypes of the mandibular articulation of the quadrate linked to function. As an example, six isolated quadrates from the Kem Kem beds (Cenomanian) of Morocco are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, morphometric, and phylogenetic morphometric analyses. Morphofunctional analysis of the spinosaurid mandibular articulation has shown that the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a mediolaterally oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. A new species of theropod from the Lourinhã Formation of Portugal, Torvosaurus gurneyi, is erected based on a right maxilla and an incomplete caudal centrum. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A theropod clutch containing several crushed eggs and embryonic material is also assigned to this new species of Torvosaurus. Investigation on the maxilla ontogeny in basal tetanurans reveals that crown denticles, elongation of the anterior ramus, and fusion of interdental plates appear at a posthatchling stage. On the other hand, maxillary pneumaticity is already present at an embryonic stage in non-avian theropods.

A description of the Australian early psychosis intervention model and a proposal to establish a Pilot Early Intervention Program in Santa Cruz de la Sierra, Bolívia

RESUMO: Em 2011, a Associação Psiquiátrica Mundial lançou um programa de bolsas de investigação para psiquiatras em início de carreira a partir de países de renda baixa ou média-baixa, no âmbito deste programa, o autor foi selecionado para uma bolsa de pesquisa no Centre for Youth Mental Health/Orygen Youth Health Research Centre da Universidade de Melbourne. Orygen, é a principal organização de pesquisa e tradução do conhecimento do mundo com foco em problemas de saúde mental em pessoas jovens. O estágio foi baseado em Prevenção e Intervenção Precoce Psychosis Centre (EPPIC), que faz parte do Orygen. EPPIC fornece programa de tratamento abrangente e integrada, baseada na comunidade para o primeiro episódio de psicose. Esta dissertação descreve o modelo EPPIC, e seus componentes essenciais e fatores que são necessários para uma implementação de serviço direito. Além disso, uma proposta de criação de um programa-piloto de intervenção psicose precoce é discutido. Este programa inclui um programa de extensão inovadora que combina princípios comerciais sólidos, com metas sociais, a fim de combater especificamente a maior barreira para o tratamento da psicose precoce na Bolívia: o estigma da doença mental. Ao utilizar uma equipe de tratamento móvel, multidisciplinar, que enfatiza os papéis dos gerentes do caso treinados focada em fornecer indivíduo intensiva e apoio familiar no lar, este programa irá prestar cuidados culturalmente apropriados que irá alavancar contribuições de um suprimento limitado de psiquiatras e mudar longe da dependência um sistema médico fragmentado. ---------------------------- ABSTRACT: In 2011, the World Psychiatric Association launched a programme of research fellowships for early-career psychiatrists from low- or lower-middle income countries, within this programme, the author was selected to a research fellowship at the Centre for Youth Mental Health/Orygen Youth Health Research Centre at University of Melbourne. Orygen, is the world’s leading research and knowledge translation organization focusing on mental ill-health in young people. The traineeship was based on Early Psychosis Prevention and Intervention Centre (EPPIC), which is part of Orygen. EPPIC provides comprehensive, integrated, community-based treatment program for first-episode psychosis. This dissertation describes the EPPIC model, and its core components and factors which are necessary to a right service implementation. Additionally, a proposal to establish a pilot early psychosis intervention programme is discussed. This programme includes an innovative outreach programme that combines sound business principals with social goals in order to specifically target the largest barrier to early psychosis treatment in Bolivia: the stigma of mental illness. By utilizing a mobile, multidisciplinary treatment team that emphasizes the roles of trained case managers focused on providing intensive individual and family support in the home, this programme will provide culturally appropriate care that will leverage contributions from a limited supply of psychiatrists and shift dependence away from a fragmented medical system.

The names of things: terminology and the practice of art history

This paper aims to explore the ways in which standard art history terminology shapes the practice of art history by conditioning the interpretation of specific works of art and, in certain cases, the definition of a research subject (especially where questions of genre and periodization are concerned). Taking as a case study a painting by Georges de La Tour, the Peasant Couple Eating, I will argue that terms such as realism, realistic, naturalistic etc. used for its description and/or interpretation, far from constituting objective stylistic characterizations, shape our perception of the work in question. Bringing the question of social class to the center of the discourse on realism, I propose to show how the social divide between the painter and his subject matter (in this case, the peasants) is internalized in the painting’s style and meaning, and how it is fundamental for the understanding of its intentionality and function.