Robustness analysis of deteriorating reinforced concrete slabs

Corrosion of reinforcement bars in concrete structures is the most significant deterioration mechanism in these structures. Corrosion is extremely difficult to predict and, consequently, can be regarded as an unpredictable event. Following this, robustness assessment methods can be employed to define the susceptibility of a structure to corrosion. In this work, robustness is measured in terms of the remaining safety of a deteriorated structure. The proposed methodology is illustrated by means of a reinforced concrete (RC) slab subjected to dead and live loads. The performance of the corroded slab is evaluated using non-linear analysis. The reliability index is adopted to assess the safety of the deteriorated structure. To compute the reliability index a strategy combining the First Order Reliability Method (FORM) and the Response Surface Method (RSM) is used.

Low power low voltage quadrature RC oscillators for modern RF receivers

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

A framework for robustness assessment in the context of corroded RC structures

Structural robustness is an emergent concept related to the structural response to damage. At the present time, robustness is not well defined and much controversy still remains around this subject. Even if robustness has seen growing interest as a consequence of catastrophic consequences due to extreme events, the fact is that the concept can also be very useful when considered on more probable exposure scenarios such as deterioration, among others. This paper intends to be a contribution to the definition of structural robustness, especially in the analysis of reinforced concrete structures subjected to corrosion. To achieve this, first of all, several proposed robustness definitions and indicators and misunderstood concepts will be analyzed and compared. From this point and regarding a concept that could be applied to most type of structures and dam-age scenarios, a robustness definition is proposed. To illustrate the proposed concept, an example of corroded reinforced concrete structures will be analyzed using nonlinear analysis numerical methods based on a contin-uum strong discontinuities approach and isotropic damage models for concrete. Finally the robustness of the presented example will be assessed.

Numerical simulation of blast effects on fibre grout RC panels

The main purpose of the present dissertation is the simulation of the response of fibre grout strengthened RC panels when subjected to blast effects using the Applied Element Method, in order to validate and verify its applicability. Therefore, four experimental models, three of which were strengthened with a cement-based grout, each reinforced by one type of steel reinforcement, were tested against blast effects. After the calibration of the experimental set-up, it was possible to obtain and compare the response to the blast effects of the model without strengthening (reference model), and a fibre grout strengthened RC panel (strengthened model). Afterwards, a numerical model of the reference model was created in the commercial software Extreme Loading for Structures, which is based on the Applied Element Method, and calibrated to the obtained experimental results, namely to the residual displacement obtained by the experimental monitoring system. With the calibration verified, it is possible to assume that the numerical model correctly predicts the response of fibre grout RC panels when subjected to blast effects. In order to verify this assumption, the strengthened model was modelled and subjected to the blast effects of the corresponding experimental set-up. The comparison between the residual and maximum displacements and the bottom surface’s cracking obtained in the experimental and the numerical tests yields a difference of 4 % for the maximum displacements of the reference model, and a difference of 4 and 10 % for the residual and maximum displacements of the strengthened model, respectively. Additionally, the cracking on the bottom surface of the models was similar in both methods. Therefore, one can conclude that the Applied ElementMethod can correctly predict and simulate the response of fibre grout strengthened RC panels when subjected to blast effects.

Analysis and design of sinusoidal quadrature RC-oscillators

Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.

New quasi-orthogonal BCH-derived sequences for CDMA applications

European Transactions on Telecommunications, vol. 18

Effect of fungal colonization on mechanical performance of cork

The industrialization of traditional processes relies on the scientific ability to understand the empirical evidence associated with traditional knowledge. Cork manufacturing includes one operation known as stabilization, where humid cork slabs are extensively colonized by fungi. The implications of fungal growth on the chemical quality of cork through the analysis of putative fungal metabolites have already been investigated. However, the effect of fungal growth on the mechanical properties of cork remains unexplored. This study investigated the effect of cork colonization on the integrity of the cork cell walls and their mechanical performance. Fungal colonization of cork by Chrysonilia sitophila, Mucor plumbeus Penicillium glabrum, P. olsonii, and Trichoderma longibrachiatum was investigated by microscopy. Growth occurred primarily on the surface of the cork pieces, but mycelium extended deeper into the cork layers, mostly via lenticular channels and by hyphal penetration of the cork cell wall. In this first report on cork decay in which specific correlation between fungal colonization and mechanical proprieties of the cork has been investigated, all colonizing fungi except C. sitophila, reduced cork strength, markedly altering its viscoelastic behaviour and reducing its Young’s modulus.

Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

Anatase as an alternative application for preventing biodeterioration of mortars: evaluation and comparison with other biocides

International Biodeterioration & Biodegradation 64(2010)388 e 396

Prevalência do consumo de drogas ilícitas nas Forças Armadas estudo epidemiológico num dos ramos

RESUMO: Desde 1976 que as Forças Armadas desenvolvem acções de prevenção do consumo de drogas e álcool. Na década de 80 foi criada capacidade laboratorial e deu-se início a um programa de rastreios toxicológicos. No quinquénio 2001 a 2005, as proporções de resultados positivos, associando todos os tipos de rastreio, variaram entre 3,7% e 1,5%. De Outubro de 2006 a Julho de 2007 realizou-se um estudo analítico transversal, para estimar a prevalência do consumo de drogas (canabinóides, opiáceos, cocaína e anfetaminas) num dos Ramos das Forças Armadas, com base nos despistes realizados pelo seu laboratório. Foi utilizada uma amostra aleatória simples de 1039 militares, profissionais (QP) e contratados (RC), no activo e de ambos os sexos. Desde a nomeação dos militares a rastrear, passando pela cadeia de custódia das amostras até à obtenção do resultado foi utilizado apoio informático específico. O processo de pesquisa utilizou duas técnicas de triagem por imunoensaio e tecnologia de confirmação por GC/MS, de acordo com as recomendações europeias, permitindo estabelecer uma metodologia standard para organizações e empresas. A prevalência estimada, de consumidores de droga, foi de 3,8/1.000, para um erro de 0,37%. O número de casos registado (4) não permitiu a utilização de testes estatísticos que conduzissem à identificação de características determinantes da positividade, mas não deixou de revelar aspectos inesperados. A observação de séries de casos e a realização regular de estudos epidemiológicos, que ajudem a redefinir grupos alvo e a perceber a dimensão, as determinantes e as consequências do consumo de drogas é sugerida, em conclusão.--------------------------------------- RÉSUMÉ: Depuis 1976, les Forces Armées mettent au point des mesures visant à prévenir la consommation de drogues et d'alcool. En 1980, fut créé capacité laboratoriel et ont ensuite commencé un programme de dépistage toxicologique. Au cours des cinq années allant de 2001 à 2005, les proportions de consommateurs, impliquant tous les types de dépistage, allaient de 3,7% à 1,5 %. D'octobre 2006 à juillet 2007, une étude analytique transversale a été organisée pour évaluer la prévalence de l’usage de drogues (cannabis, opiacés, cocaïne et amphétamines) dans une branche de les Forces Armées, basée sur les dépistages faites par un laboratoire militaire, à l'aide d'un échantillon aléatoire de 1039 militaires, professionnels (QP) et sous contract (RC), à l’actif et des deux sexes. Tout au long du procès, de la nomination des donneurs, en passant par la chaine de garde des échantillons, jusqu’à obtention du résultat, il fut employé un appui informatique sécurisé. Le processus de recherche employa deux techniques de tri par imunoessay et la technologie de confirmation GC/MS, selon les recommandations européennes, permettant d'établir une méthodologie standard pour les organisations et les entreprises. La prévalence estimée fut de 3,8/1.000 pour une marge d’erreur de 0,37%. Le nombre de cas enregistrés (4) n'autorise pas l'utilisation de testes statistiques de menant à l'identification de caractéristiques déterminant de la positivité, mais il permet à révéler des aspects inattendus. L'observation de séries de cas et la tenue régulière d’études épidémiologiques, qui contribuent à redéfinir les groupes cibles et de comprendre l'ampleur, les déterminants et les conséquences de l'usage de drogues, est suggéré, en fin de compte.--------------------------------------- ABSTRACT: Since 1976, the Armed Forces, have been developing measures to prevent the use of drugs and alcohol. In 1980, was created laboratory facility which then started a program of toxicological screenings. In the five years running from 2001 to 2005, the proportions of consumers, involving all types of screening, ranged from 3,7% to 1,5%. From October 2006 to July 2007, a cross-sectional study was held to estimate the prevalence of drug use (cannabinoids, opiates, cocaine and amphetamines) in one branch of the Portuguese Armed Forces, based on laboratory screenings, using a random sample of 1039 military, professional (QP) and enlisted (RC), active-duty and of both sexes. Specific computer support was used all the way, from the appointment, including the chain of custody of samples, to the obtaining of the result. The process of search used two techniques for sorting by immunoassay and confirmation technology GC/MS, according to European recommendations, allowing to establish a standard methodology for organizations and companies. The estimated prevalence of drug users was 3.8/1.000 for a 0.37% error (95% confidence interval). The number of cases registered (4) does not permit use of statistical testing leading to the identification of characteristics weighing in the establishing to extrapolate for the population, but it allows revealing unexpected aspects. The observation of series of cases and the regular holding of epidemiological studies, which help redefine target groups and to understand the extent, the determinants and consequences of drug use, is suggested, in conclusion.

Penicillium glabrum cork colonising isolates – preliminary analysis of their genomic similari

Cork stopper manufacturing process includes an operation, known as stabilisation, by which humid cork slabs are extensively colonised by fungi. The effects of fungal growth on cork are yet to be completely understood and are considered to be involved in the so called “cork taint” of bottled wine. It is essential to identify environmental constraints which define the appearance of the colonising fungal species and to trace their origin to the forest and/or as residents in the manufacturing space. The present article correlates two sets of data, from consecutive years and the same season, of systematic biologic sampling of two manufacturing units, located in the North and South of Portugal. Chrysonilia sitophila dominance was identified, followed by a high diversity of Penicillium species. Penicillium glabrum, found in all samples, was the most frequent isolated species. P. glabrum intra-species variability was investigated using DNA fingerprinting techniques revealing highly discriminative polymorphic markers in the genome. Cluster analysis of P. glabrum data was discussed in relation to the geographical location of strains, and results suggest that P. glabrum arise from predominantly the manufacturing space, although cork resident fungi can also contrib

Robustness of corroded reinforced concrete structures. A structural performance approach

Structure and Infrastructure Engineering, 1-17

Dynamics of cork mycobiota throughout stopper manufacturing process: from diversity to metabolite

Dissertation presented to obtain the Ph.D degree in Biology

Long-term behaviour of railway transitions under dynamic loading application to soft soil sites

Dissertação para obtenção do Grau de Doutor em Engenharia Civil