In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Noble metal nanoparticles - Au and Ag - for biodetection

Dissertation submitted for obtainment of the Master’s Degree in Biotechnology, by the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Criação e Exploração de um corpus bilingue (IN-PT) sobre células estaminais

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Terminologia e Gestão da Informação de Especialidade.

Agregador de notícias: Kioske.pt

Trabalho de Projecto de Mestrado em Novos Media e Práticas Web

Youtube.pt: O retrato português no Youtube

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

Local Development Initiatives in Metropolitan Areas' Suburban Municipalities: a comparative case-study between Amadora (Lisbon-PT) and Diadema (São Paulo-BR)

MARQUES, B.P. e CARVALHO, R. (2010) "Local Development Initiatives in Metropolitan Areas' Suburban Municipalities: a comparative case-study between Amadora (Lisbon-PT) and Diadema (São Paulo-BR)", in Actas do 16.º Congresso da APDR, Funchal, pp. 1053-1083, ISBN 978-989-96353-1-9.

PT. Telekomunikasi Indonesia: Equity research

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

Archaeometallurgical study of the Proto-historic collection of Moinhos de Golas (North Portugal): a forecast for technological changes?

This work presents the archaeometallurgical study of a group of metallic artefacts found in Moinhos de Golas site, Vila Real (North of Portugal), that can generically be attributed to Proto-history (1st millennium BC, Late Bronze Age and Iron Age). The collection is composed by 35 objects: weapons, ornaments and tools, and others of difficult classification, as rings, bars and one small thin bent sheet. Some of the objects can typologically be attributed to Late Bronze Age, others are of more difficult specific attribution. The archaeometallurgical study involved x-ray digital radiography, elemental analysis by micro-energy dispersive X-ray fluorescence spectrometry and scanning electron microscopy with energy dispersive spectroscopy, microstructural observations by optical microscopy and scanning electron microscopy. The radiographic images revealed structural heterogeneities frequently related with the degradation of some artefacts and the elemental analysis showed that the majority of the artefacts was produced in a binary bronze alloy (Cu-Sn) (73%), being others produced in copper (15%) and three artefacts in brass (Cu-Zn(-Sn-Pb)). Among each type of alloy there’s certain variability in the composition and in the type of inclusions. The microstructural observations revealed that the majority of the artefacts suffered cycles of thermo-mechanical processing after casting. The diversity of metals/alloys identified was a discovery of great interest, specifically due to the presence of brasses. Their presence can be interpreted as importations related to the circulation of exogenous products during the Proto-history and/or to the deposition of materials during different moments at the site, from the transition of Late Bronze Age/Early Iron Age (Orientalizing period) onwards, as during the Roman period.

Adaptação cultural e contributo para a validação da pain attitudes and believes scale for physiotherapists (PABS-PT) para a população de fisioterapeutas portugueses

RESUMO: Introdução: Vários estudos têm encontrado evidência para a relação entre as crenças e atitudes dos profissionais de saúde, a sua abordagem de tratamento, referida como orientada segundo o modelo biomédico ou modelo biopsicossocial (Bishop, 2008; Mutsaers, 2012), e os resultados obtidos. É sugerido que, no tratamento da dor lombar crónica, os profissionais que orientam o seu raciocínio e prática segundo o modelo biomédico, tendem a obter piores resultados quando comparados com os obtidos pelos profissionais que orientam o seu raciocínio e prática segundo uma abordagem biopsicossocial. Esta área de estudo tem salientado a importância de desenhar instrumentos capazes de identificar a orientação preferencial dos profissionais de saúde no tratamento da dor crónica de natureza músculo-esquelética, entre os quais se encontra a “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objetivo: Adaptar culturalmente a PABS-PT para a população de fisioterapeutas portugueses que intervêm em utentes com dor (lombar) crónica, e contribuir para a sua validação Metodologia: A versão original (língua inglesa) do PABS-PT foi adaptada para a língua e cultura portuguesas, através das etapas definidas nas normas orientadoras estabelecidas para este processo (Beaton et al., 2002; MAPI Institute, 2001). A avaliação das propriedades psicométricas da versão portuguesa foi realizada com recurso a uma amostra de 202 fisioterapeutas e estudantes finalistas do curso de licenciatura em Fisioterapia. Inicialmente foi realizada a análise fatorial exploratória da escala através do método das componentes principais. Posteriormente avaliou-se a consistência interna das componentes obtidas com recurso ao alpha de Cronbach (α). Para analisar a validade de constructo foram correlacionadas as componentes obtidas com a versão portuguesa da “Health Care Providers’ Pain and Impairment Relationship Scale” (HC-PAIRS), recorrendo ao cálculo do coeficiente de Spearman. Resultados: O processo de adaptação cultural não revelou dificuldades importantes sendo considerado que a versão portuguesa da PABS-PT é de fácil compreensão e preenchimento, e os seus itens adequados para avaliar as crenças e atitudes dos fisioterapeutas portugueses relativas à intervenção na dor crónica músculo-esquelética. Os resultados revelaram uma estrutura fatorial de duas componentes, identificadas com as componentes da escala original que explicam 30,96% da variância total. A consistência interna encontrada é boa, para a componente biomédica (α de Cronbach = 0,826), mas muito fraca para a componente biopsicossocial (α de Cronbach= 0,589). Relativamente à validade convergente e discriminativa, foi encontrada uma associação estatisticamente significativa e positiva, entre as componentes 1 (biomédica) da versão nportuguesa da PABS e a HC-PAIRS (Rs = 0,481, p≤ 0,005), e negativa, fraca e significativa entre a pontuação total da componente 2 (biopsicossocial) e a HC-PAIRS (Rs = -0,038, p=0,612). Conclusão: A versão portuguesa do PABS-PT é de fácil compreensão e aparenta ser um instrumento válido para a medição da orientação preferencial dos fisioterapeutas, relativamente às suas atitudes e crenças na avaliação e tratamento de utentes com dor crónica de natureza músculo-esquelética. No entanto, a componente biopsicossocial requer uma análise mais aprofundada para que possa, com rigor, ser utilizada na definição de uma orientação preferencialmente biopsicossocial.--------------ABSTRACT: Introduction: Previous studies have found a relation between the beliefs and attitudes of health professionals, their treatment approach, which can follows a biomedical or a biopsychosocial orientation (Bishop, 2008; Mutsaers, 2012), and the outcomes obtained. Therefore, is suggested that the professionals who tend to approach chronic low back pain patients according to the biomedical model have worse outcomes than professionals who use a biopsychosocial approach in there clinical reasoning. This research field has highlighted the importance of developing measures capable of identifying the preferred orientation of health professionals in the treatment of chronic pain of musculoskeletal nature, including the “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objective: To cross culturally adapt and validate the PABS-PT for the Portuguese population of physiotherapists. Methodology: The original version (English version) of the PABS-PT was adapted to the Portuguese language and culture, through the guidelines established for these processes (Beaton et al., 2002; MAPI Institute, 2001). The psychometric evaluation of the Portuguese version was carried out on a sample of 202 p physiotherapist and final year students of the physiotherapy course. Initially, an exploratory factorial analysis was performed through the method of the main components. Then, the internal consistence of the main components was evaluated using the Cronbach’s alpha (α). The convergent construct validity was analysed through the correlation between the obtained components of PABS-PT and the Health Care Provider’s Pain and Impairment Relationship Scale (HC-PAIRS), using the Spearmen correlation coefficient. Results: No major difficulties were found during the cultural adaptation process of PABS-PT to Portugal, which means that the Portuguese version is easy to understand and fulfill, and items are appropriated to evaluate the beliefs and attitudes of the Portuguese physiotherapists who treat chronic pain of musculoskeletal origins. The results revealed a factorial structure of two components, as the original scale, explaining 30,96% of the total variance. Internal consistence results were good, for the biomedical component (Cronbach’s α = 0,826), but very weak for the biopsychosocial componente (Cronbach’s α = 0,589). Relatively to convergent and discriminative validity, a statistically significant association was found, between the components 1 (biomedical) of the Portuguese version of PABS-PT and the HC-PAIRS (Rs= 0,481, p≤ 0,005) and negative, weak and significant between the total score of component 2 (biopsychosocial) and the HC-PAIRS (Rs = -0,038, p=0,612). Conclusion: The Portuguese Version of PABS-PT is easy to understand and seems to be a valid instrument to measure the attitudes and beliefs of physiotherapists in the management of patients with chronic low back pain. However, the biopsychosocial component requires a further deep analysis to examine a preferable biopsychosocial orientation.

The impact of online promotional efforts on customer acquisitiom and retention at continente.pt

Continente Online (COL) is the market leader of online grocery retailing in Portugal. Aiming at sustaining this position, it has been focusing its promotional efforts in acquiring and retaining customers. This report intakes an extensive study on the impact of COL’s exclusive promotional efforts (free delivery offers and ten percent discounts on loyalty card) on customer acquisition and retention, as well as, a cost analysis on these offers. Two econometric models were developed and the results were interesting. It was concluded that free delivery offers have a significant impact both in terms of customer acquisition and retention, having also a lower cost in comparison with ten percent on loyalty card discounts.

Management consulting labs- Pt

The purpose of this project was to assist PT in identifying how the company could capture value with a new technology in the short-medium term in Portugal. The analysis performed consisted on identifying, evaluating and prioritizing the business opportunities that could have this new technology. Thus, a prioritization methodology was set to find the ones with greater value, and a deep analysis was conducted to its assessment. Subsequently, a strategy for the whole organization and for the priorities discovered was outlined. Based on these analyses, a set of recommendations was given to PT concerning its position regarding this new technolog

Contribuição da detecção remota para a prospecção de jazigos de Sn, W e Au na região de Góis

A presente dissertação pretende utilizar técnicas de detecção remota como ferramenta na prospecção de jazigos de estanho, volfrâmio e ouro em Portugal Continental. O facto de ser relativamente comum a coexistência de mineralizações estano-volframíticas com mineralizações auro-argentíferas nas regiões centro e norte de Portugal, associado à importância estratégica e económica destes metais, tanto a nível nacional, como europeu, faz destas regiões um dos mais apetecíveis alvos para a prospecção e exploração mineira em Portugal. No contexto português, as ferramentas de detecção remota têm vindo a ser aplicadas com alguma regularidade e nas mais diversas temáticas das Geociências. Contudo, exceptuando alguns trabalhos, principalmente dos anos oitenta e noventa, são escassos os casos conhecidos da aplicação específica da detecção remota na prospecção de recursos minerais metálicos em Portugal. Assim, através da utilização de critérios de fotointerpretação, da aplicação de técnicas de processamento digital a imagens de satélite, assim como da integração dos resultados obtidos com dados de cartografia geológica, de altimetria e geofísicos, pretende-se a selecção de zonas potencialmente relacionadas com a ocorrência dos referidos metais na região de Góis-Castanheira de Pêra. A selecção das zonas potenciais tem como objectivo a escolha de alvos para posterior estudo em pormenor, cujo alcance já não é abrangido pelo âmbito desta dissertação. Para além da aplicação das técnicas de detecção remota e da integração de diferentes fontes de informação em ambiente SIG, foram realizados trabalhos de campo com o intuito de permitir a validação preliminar dos resultados obtidos.

Plasma nitriding of AA2011 alloy and surface characterization by NDT techniques

Al-Cu alloys are widely used in the aerospace and automotive industries due to their high specific strength in some tempered conditions. However, due to poor corrosion and wear resistance, they are often anodized and/or painted. Plasma nitriding has been proposed as an alternative, though the developments in this technique are still in a recent stage for Al alloys. Electrical characterization techniques are well implemented NDTs in the industry because of good accuracy associated with lower cost, compared to other methods. Some, like eddy currents and 4-point probe techniques, are often used in coating inspection. The objective of this study was to perform Al nitriding at low temperatures to minimize the tempering initial condition damage and to assess the feasibility of eddy currents technique as a method for evaluating surface properties. The work developed can be divided in two stages. The first one was the process tuning, done at the Shibaura Institute of Technology, in Tokyo; and the second was the electrical characterization done in Faculdade de Ciências e Tecnologia, UNL. Low temperature nitriding of AA2011 alloy specimens was successfully achieved. Electrical conductivity results show that lift-off measurements by eddy currents testing can be related to surface properties.