Life-cycle performance of structures: combining expert judgment and results of inspection

Life-Cycle Civil Engineering – Biondini & Frangopol

Probabilistic maintenance and optimization strategies for deteriorating civil infrastructures

In developed countries, civil infrastructures are one of the most significant investments of governments, corporations, and individuals. Among these, transportation infrastructures, including highways, bridges, airports, and ports, are of huge importance, both economical and social. Most developed countries have built a fairly complete network of highways to fit their needs. As a result, the required investment in building new highways has diminished during the last decade, and should be further reduced in the following years. On the other hand, significant structural deteriorations have been detected in transportation networks, and a huge investment is necessary to keep these infrastructures safe and serviceable. Due to the significant importance of bridges in the serviceability of highway networks, maintenance of these structures plays a major role. In this paper, recent progress in probabilistic maintenance and optimization strategies for deteriorating civil infrastructures with emphasis on bridges is summarized. A novel model including interaction between structural safety analysis,through the safety index, and visual inspections and non destructive tests, through the condition index, is presented. Single objective optimization techniques leading to maintenance strategies associated with minimum expected cumulative cost and acceptable levels of condition and safety are presented. Furthermore, multi-objective optimization is used to simultaneously consider several performance indicators such as safety, condition, and cumulative cost. Realistic examples of the application of some of these techniques and strategies are also presented.

Medidas Fonológicas em Crianças com Perturbação dos Sons da Fala. Estudo comparativo entre o português europeu e o português brasileiro.

O objetivo deste estudo é comparar as características de dois grupos de crianças com diagnóstico de Perturbação dos Sons da Fala (PSF), falantes de português europeu (PE) e falantes de português brasileiro (PB), considerando um conjunto de medidas fonológicas que incluem Percentagem de Consoantes Corretas (PCC), Percentagem de Consoantes Corretas Revista (PCC-R), Process Density Index (PDI), Índices Absolutos (IA) e Índices Relativos (IR) de Substituição, Omissão e Distorção, tipos de Processos Fonológicos e Percentagem de Acerto por Fonema (PAF). Método: Neste estudo participaram dezoito crianças com diagnóstico de Perturbação dos Sons da Fala (PSF), com idades compreendidas entre os cinco anos e dois meses e os sete anos e 11 meses, sendo doze do sexo masculino e seis do sexo feminino, divididas em dois grupos - falantes de português europeu (GPE) e falantes de português brasileiro (GPB) - emparelhadas por idade, sexo e valor de PCC. A partir da análise das transcrições fonéticas constantes nas folhas de registo de cada subteste de nomeação de cada sujeito - Teste Fonético-Fonológico - Avaliação de Linguagem Pré-Escolar (TFF - ALPE) (Mendes et al., 2009) para o português europeu, e provas de fonologia do Teste de Linguagem Infantil ABFW (Andrade et al., 2004) para o português brasileiro,- foram calculadas e comparadas as medidas fonológicas referidas, recorrendo a testes estatísticos (paramétricos e não paramétricos). Resultados: O emparelhamento do GPE com o GPB foi bem sucedido. Não existiram diferenças estatísticamente significativas nas medidas fonológicas em estudo entre o GPE e o GPB. No Estudo 1, não existiram diferenças nos tipos de erros à exceção do erro de omissão. No Estudo 2, no GPE verificamos um menor número de erros de distorção e um maior número de erros de omissão. Existem algumas particularidades devido à variante da língua, nomeadamente no processo fonológico de PAL e de DESV. Conclusão: Esta investigação permitiu realizar a comparação do GPE e do GPB com a utilização de dois instrumentos recolha de dados diferentes. Os resultados foram de encontro ao que é descrito por outros estudos nesta área de investigação. As poucas diferenças que se observaram podem ser explicadas pelas diferenças existentes entre os sistemas fonético-fonológicos das duas variedades linguísticas. É extremamente importante a metodologia de recolha de dados para a avaliação das PSF. A mais valia desta pesquisa é o contributo de indicadores clínicos para diagnóstico, prognóstico e intervenção terapêutica nas PSF.

Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Contribuição para a adaptação cultural do Neck Disability Index e caraterização da prática de fisioterapia em pacientes com dor crónica cervical

RESUMO: Objetivo: Este trabalho teve como objetivo contribuir para o processo de adaptação cultural do Neck Disability Index (NDI), através da análise da sua unidimensionalidade e do estudo da sua fiabilidade (consistência interna e fiabilidade teste-reteste), validade de constructo e poder de resposta. De igual forma pretendeu-se caraterizar a intervenção realizada pela fisioterapia e os resultados obtidos em pacientes com Dor Cervical Crónica (DCC). Introdução: A dor cervical é um problema cada vez mais comum nos países industrializados, constituindo uma das três condições mais frequentemente reportadas por queixas de origem músculo-esquelética. A sua incidência é um fenómeno em crescimento, com custos implicados para a sociedade. Desta forma reconhece-se a importância de um instrumento que monitorize a evolução da incapacidade funcional associada à DCC. O NDI é atualmente o instrumento de avaliação mais recomendado para avaliar a incapacidade funcional associada à dor cervical. Foi traduzido e adaptado à língua portuguesa, mas à data não foi realizada nenhuma avaliação das suas propriedades psicométricas. Por outro lado, apesar de a literatura referir que os serviços de Fisioterapia são extremamente procurados por indivíduos com DCC, em Portugal, a informação sobre a sua prática nesta condição clínica é escassa ou mesmo inexistente. Assim, e sendo a incapacidade nas atividades funcionais uma das variáveis de maior impacto da DCC e ao mesmo tempo um dos resultados principais da intervenção da Fisioterapia, importa por um lado possuir instrumentos capazes de avaliar o nível de incapacidade funcional e a sua mudança, e por outro, aferir qual a intervenção realizada pela Fisioterapia e quais os resultados obtidos. Metodologia: Realizou-se um estudo de coorte prospetivo com uma amostra de conveniência, do tipo não probabilístico, constituída por 88 pacientes com DCC de origem músculo-esquelética e causa não traumática referenciados para 6 serviços de fisioterapia / medicina física e de reabilitação de clínicas e centros de reabilitação, sendo elegíveis todos os pacientes que cumprissem os critérios de inclusão e exclusão estabelecidos. Os pacientes foram avaliados em três momentos pré-definidos: antes do início das sessões de fisioterapia ou na 1ª semana de tratamento; 4 a 7 dias após a 1ª avaliação; e 7 semanas após o início da fisioterapia. Para verificação da unidimensionalidade do NDI, procedeu-se a uma Análise Fatorial Exploratória. As propriedades psicométricas do NDI avaliadas foram a Fiabilidade (consistência interna e fiabilidade teste-reteste), a Validade de Constructo e o Poder de Resposta. Posteriormente procedeu-se à caraterização da prática da fisioterapia quanto às modalidades utilizadas, número de sessões de tratamento e duração do episódio de cuidados. Adicionalmente descreveu-se os resultados obtidos após a intervenção da fisioterapia ao nível da dor e incapacidade. Resultados: os resultados obtidos foram positivos e significativos, com a confirmação da unidimensionalidade do NDI, sendo que em todos os critérios seguidos o fator mínimo retido foi de um. Na avaliação da consistência interna o valor obtido foi acima do mínimo aceitável (α Cronbach = 0,77), enquanto o valor de fiabilidade teste-reteste foi elevado (CCI =0,95). De igual forma, os resultados foram positivos para a validade de constructo, obtendo-se uma associação positiva do NDI com a Escala Numérica da dor (END). O valores de poder de resposta reportaram uma Área Abaixo da Curva de 0,63 (IC 95%=0,51-0,75), com valor de Diferença Mínima Clinicamente importante de 5,5 pontos (sensibilidade = 69,6%; especificidade = 43,6%). Relativamente á intervenção de fisioterapia em casos de DCC verificou-se que as características da prática da fisioterapia reportadas neste relatório são de difícil comparação ou análise dada a escassez ou inexistência de trabalhos publicados sobre este assunto em pacientes com DCC. No entanto, neste estudo, encontraram-se reduções significativas na intensidade da dor e incapacidade funcional após a intervenção de fisioterapia (z= -7,16; p<0,001 e t= 10,412, p<0,05, respetivamente). Conclusão: Os resultados do presente estudo revelam que o NDI-VP possui uma boa Fiabilidade, Validade de Constructo e Poder de Resposta. Revela ainda que a intervenção da fisioterapia em casos de DCC, apesar da escassez de trabalhos publicados, proporciona uma redução significativa dos níveis de dor e incapacidade em pacientes com DCC.--------------- ABSTRACT:Objective: the aim of this study was to contribute for the process of cultural adaption of the Neck Disability Index (NDI), through the analysis of his unidimensionality and the study of his reliability (internal consistency and test-retest reliability), construct validity and responsiveness. At the same time it pretends to characterize the intervention performed by physical therapy and the results in patients with Chronic Neck Pain (CNP). Introduction: neck pain is a common problem in the industrialized countries, since is one of the three most reported conditions by complaints with musculoskeletal origin. His incidence is a growth phenomena that implicate great costs to society. Therefore the importance of an instrument that monitories the evolution of the functional disability associated to CNP is recognized. Nowadays, NDI is the instrument most recommended to evaluate functional disability associated to neck pain. It has been translated and adapted to portuguese but, till now, no evaluation of his psychometric proprieties has been completed. In the other hand, despite literature refers that physical therapy services are extremely searched by patients with neck pain, in Portugal, the information about practice in this clinical condition is very few or inexistent. Therefore, and since disability in the functional activities is one of the variables with most impact of CNP and, at the same time, one of the main results of physical therapy interventions, it’s important to have instruments capable of evaluate the level of functional disability and his change, and also calculate which intervention of physical therapy is most appropriate and his results. Methodology: it was used a prospective cohort study with a convenience sample, non-probabilistic, consisting of 88 patients with CNP of musculoskeletal origin and non-traumatic cause, referred to 6 physical therapy services of clinics and rehabilitation centers, and fulfilled the inclusion and exclusion criteria established. Patients were evaluated in three pre-defined moments: before the beginning of physical therapy or during the first week of treatment; 4 to 7 days after the first evaluation; and 7 weeks after beginning of physical therapy. To verify NDI unidimensionality, we run an Exploratory Factorial Analysis. NDI psychometric proprieties evaluated were reliability (internal consistency and test-retest reliability), construct validity and responsiveness. Subsequently, it was proceeded the characterization the practice of physical therapy regarding to the modalities used, the number of treatment sessions and duration of the episode of care. Additionally it was described the results obtained after the intervention of the physical therapy, the level of pain and the disability. Results: results were positive and significant, with the confirmation of the NDI unidimensionality, since in every followed criteria the minimal retained factor was one. In the evaluation of internal consistency the value was above the minimal accepted (α Cronbach = 0,77), and the test-retest reliability value was high (CCI =0,95). Results were positive to construct validity, with an positive association of the NDI with Numeric Rating Scale (NRS). Responsiveness values reported an Area Under Curve (AUC) of 0,63 (IC 95%=0,51-0,75) with a Minimal Important Detectable Change (MIDC) of 5,5 points (sensitivity = 69,9%; specificity = 43,6%). Regarding physical therapy interventions in CNP, it was verified that the physical therapy characteristics reported are difficult to compare or analyze since there are very few published studies about this topic. However, in this study, significant reductions were founded in pain intensity and functional disability after intervention(z= -7,16; p<0,001 and t= 10,412, p<0,05, respectively).Conclusion: present study results reveals that NDI has an good reliability, construct validity and responsiveness. It also reveals that physical therapy intervention in CNP, beside few studies published, result in a significant reduction of pain and disability levels in patients with CNP.

Rigid pavements distresses - pavement condition index evaluation

Pavements require maintenance in order to provide good service levels during their life period. Because of the significant costs of this operation and the importance of a proper planning, a pavement evaluation methodology, named Pavement Condition Index (PCI), was created by the U.S. Army Corps of Engineers. This methodology allows for the evaluation of the pavement condition along the life period, generally yearly, with minimum costs and, in this way, it is possible to plan the maintenance action and to adopt adequate measures, minimising the rehabilitation costs. The PCI methodology provides an evaluation based on visual inspection, namely on the distresses observed on the pavement. This condition index of the pavement is classified from 0 to 100, where 0 it is the worst possible condition and 100 the best possible condition. This methodology of pavement assessment represents a significant tool for management methods such as airport pavement management system (APMS) and life-cycle costs analysis (LCCA). Nevertheless, it has some limitations which can jeopardize the correct evaluation of the pavement behavior. Therefore the objective of this dissertation is to help reducing its limitations and make it easier and faster to use. Thus, an automated process of PCI calculation was developed, avoiding the abaci consultation, and consequently, minimizing the human error. To facilitate also the visual inspection a Tablet application was developed to replace the common inspection data sheet and thus making the survey easier to be undertaken. Following, an airport pavement condition was study accordingly with the methodology described at Standard Test Method for Airport Pavement Condition Index Surveys D5340, 2011 where its original condition level is compared with the condition level after iterate possible erroneous considered distresses as well as possible rehabilitations. Afterwards, the results obtained were analyzed and the main conclusions presented together with some future developments.

Proving a market for a startup befor scaling using the hypothesis-driven entrepreneurship process

The year is 2015 and the startup and tech business ecosphere has never seen more activity. In New York City alone, the tech startup industry is on track to amass $8 billion dollars in total funding – the highest in 7 years (CB Insights, 2015). According to the Kauffman Index of Entrepreneurship (2015), this figure represents just 20% of the total funding in the United States. Thanks to platforms that link entrepreneurs with investors, there are simply more funding opportunities than ever, and funding can be initiated in a variety of ways (angel investors, venture capital firms, crowdfunding). And yet, in spite of all this, according to Forbes Magazine (2015), nine of ten startups will fail. Because of the unpredictable nature of the modern tech industry, it is difficult to pinpoint exactly why 90% of startups fail – but the general consensus amongst top tech executives is that “startups make products that no one wants” (Fortune, 2014). In 2011, author Eric Ries wrote a book called The Lean Startup in attempts to solve this all-too-familiar problem. It was in this book where he developed the framework for The Hypothesis-Driven Entrepreneurship Process, an iterative process that aims at proving a market before actually launching a product. Ries discusses concepts such as the Minimum Variable Product, the smallest set of activities necessary to disprove a hypothesis (or business model characteristic). Ries encourages acting briefly and often: if you are to fail, then fail fast. In today’s fast-moving economy, an entrepreneur cannot afford to waste his own time, nor his customer’s time. The purpose of this thesis is to conduct an in-depth of analysis of Hypothesis-Driven Entrepreneurship Process, in order to test market viability of a reallife startup idea, ShowMeAround. This analysis will follow the scientific Lean Startup approach; for the purpose of developing a functional business model and business plan. The objective is to conclude with an investment-ready startup idea, backed by rigorous entrepreneurial study.

Environmental quality of life index incorporationg MCA & GIS : case study Lisbon Metropolitan Area, Portugal

The study of Quality of Life (Qol) has been conducted on various scales throughout the years with focus on assessing overall quality of living amongst citizens. The main focus in these studies have been on economic factors, with the purpose of creating a Quality of Life Index (QLI).When it comes down to narrowing the focus to the environment and factors like Urban Green Spaces (UGS) and air quality the topic gets more focused on pointing out how each alternative meets this certain criteria. With the benefits of UGS and a healthy environment in focus a new Environmental Quality of Life Index (EQLI) will be proposed by incorporating Multi Criteria Analysis (MCA) and Geographical Information Systems (GIS). Working with MCA on complex environmental problems and incorporating it with GIS is a challenging but rewarding task, and has proven to be an efficient approach among environmental scientists. Background information on three MCA methods will be shown: Analytical Hierarchy Process (AHP), Regime Analysis and PROMETHEE. A survey based on a previous study conducted on the status of UGS within European cities was sent to 18 municipalities in the study area. The survey consists of evaluating the current status of UGS as well as planning and management of UGS with in municipalities for the purpose of getting criteria material for the selected MCA method. The current situation of UGS is assessed with use of GIS software and change detection is done on a 10 year period using NDVI index for comparison purposes to one of the criteria in the MCA. To add to the criteria, interpolation of nitrogen dioxide levels was performed with ordinary kriging and the results transformed into indicator values. The final outcome is an EQLI map with indicators of environmentally attractive municipalities with ranking based on predefinedMCA criteria using PROMETHEE I pairwise comparison and PROMETHEE II complete ranking of alternatives. The proposed methodology is applied to Lisbon’s Metropolitan Area, Portugal.