Synthesis, characterization and reactivity of new cobalt, palladium and nickel complexes bearing α-diimines and P, O ligands

This work describes the synthesis and characterization of a series of new α-diimine and P,O, β-keto and acetamide phosphines ligands, and their complexation to Ni(II), Co(II),Co(III) and Pd(II) to obtain a series of new compounds aiming to study their structural characteristics and to test their catalytic activity. All the compounds synthesized were characterized by the usual spectroscopic and spectrometric techniques: Elemental Analysis, MALDI-TOF-MS spectrometry, IR, UV-vis, 1H, 13C and 31P NMR spectroscopies. Some of the paramagnetic compounds were also characterized by EPR. For the majority of the compounds it was possible to solve their solid state structure by single crystal X-ray diffraction. Tests for olefin polymerization were performed in order to determine the catalytic activity of the Co(II) complexes. Chapter I presents a brief introduction to homogenous catalysis, highlighting the reactions catalyzed by the type of compounds described in this thesis, namely olefin polymerization and oligomerization and reactions catalyzed by the complexes bearing α-diimines and P,O type ligands. Chapter II is dedicated to the description of the synthesis of new α-diimines cobalt (II) complexes, of general formula [CoX2(α-diimine)], where X = Cl or I and the α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl-1,4-diaza-1,3-butadiene (Ar-DAB). Structures solved by single crystal X-ray diffraction were obtained for all the described complexes. For some of the compounds, X-band EPR measurements were performed on polycrystalline samples, showing a high-spin Co(II) (S = 3/2) ion, in a distorted axial environment. EPR single crystal experiments on two of the compounds allowed us to determine the g tensor orientation in the molecular structure. In Chapter III we continue with the synthesis and characterization of more cobalt (II)complexes bearing α-diimines of general formula [CoX2(α-diimine)], with X = Cl or I and α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl- 1,4-diaza-1,3-butadiene (Ar-DAB). The structures of three of the new compounds synthesized were determined by single crystal X-ray diffraction. A NMR paramagnetic characterization of all the compounds described is presented. Ethylene polymerization tests were done to determine the catalytic activity of several of the Co(II) complexes described in Chapter II and III and their results are shown. In Chapter IV a new rigid bidentate ligand, bis(1-naphthylimino)acenaphthene, and its complexes with Zn(II) and Pd(II), were synthesized. Both the ligand and its complexes show syn and anti isomers. Structures of the ligand and the anti isomer of the Pd(II) complex were solved by single crystal X-ray diffraction. All the compounds were characterized by elemental analysis, MALDI-TOF-MS spectrometry, and by IR, UV-vis, 1H, 13C, 1H-1H COSY, 1H-13C HSQC, 1H-13C HSQC-TOCSY and 1H-1H NOESY NMR when necessary. DFT studies showed that both conformers of [PdCl2(BIAN)] are isoenergetics and can be obtain experimentally. However, we can predict that the isomerization process is not available in square-planar complex, but is possible for the free ligand. The molecular geometry is very similar in both isomers, and only different orientations for naphthyl groups can be expected. Chapter V describes the synthesis of new P, O type ligands, β-keto phosphine, R2PCH2C(O)Ph, and acetamide phosphine R2PNHC(O)Me, as well as a series of new cobalt(III) complexes namely [(η5-C5H5)CoI2{Ph2PCH2C(O)Ph}], and [(η5- C5H5)CoI2{Ph2PNHC(O)Me}]. Treating these Co(III) compounds with an excess of Et3N, resulted in complexes η2-phosphinoenolate [(η5-C5H5)CoI{Ph2PCH…C(…O)Ph}] and η2- acetamide phosphine [(η5-C5H5)CoI{Ph2PN…C(…O)Me}]. Nickel (II) complexes were also obtained: cis-[Ni(Ph2PN…C(…O)Me)2] and cis-[Ni((i-Pr)2PN…C(…O)Me)2]. Their geometry and isomerism were discussed. Seven structures of the compounds described in this chapter were determined by single crystal X-ray diffraction. The general conclusions of this work can be found in Chapter VI.

An NMR structural study of nickel-substituted rubredoxin

J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6

Development of copper and nickel based oxide thin-films: design and fabrication of thin-film transistors

Dissertação para obtenção do Grau de Doutor em Nanotecnologia e Nanociência

Characterization of the [NiFe] Hydrogenase from the sulfate reducer Desulfovibrio vulgaris Hildenborough

The [NiFe] hydrogenase from Desulfovibrio vulgaris Hildenborough was isolated from the cytoplasmic membranes and characterized by EPR spectroscopy. It has a total molecular mass of 98.7 kDa (subunits of 66.4 and 32.3 kDa), and contains 1 nickel and 12 Fe atoms per heterodimer. The catalytic activities for hydrogen consumption and production were determined to be 174 and 89 umol H2 min-1 mg -1, respectively. As isolated, under aerobic conditions, this hydrogenase exhibits EPR signals characteristic of the nickel centers in [NiFe] hydrogenases (Ni-A signal at gx,y,z=2.32, 2.23 and ~2.0 and Ni-B signal at gx,y,z=2.33, 2.16 and ~2.0) as well as an intense quasi-isotropic signal centered at g=2.02 due to the oxidized [3Fe-4S] center. The redox profile under hydrogen atmosphere is remarkably similar to that of other [NiFe] hydrogenases. The signals observed for the oxidized state disappear, first being substituted by the Ni-C type signal (gx,y,z=2.19, 2.14, ~2.01), which upon long incubation under hydrogen yields the split Ni-C signal due to interaction with the reduced [4Fe-4S] centers.

Expressão e purificação da proteína E3 do vírus chikungunya (CHIKV)

RESUMO: O vírus chikungunya (CHIKV) é um vírus de RNA, com invólucro, da família Togaviridae, transmitido por mosquitos Aedes spp. Distribuído por largas regiões de África e Ásia, causa grandes epidemias de artrite grave. A semelhança de sintomas com outras doenças como a dengue e a malária e a persistência de IgM específicas, dificultam o diagnóstico da infeção por CHIKV. A deteção no sangue de E3, uma glicoproteína viral secretada, a incluir num ensaio imunoenzimático poderá melhorar o diagnóstico nos países onde as técnicas de biologia molecular são de difícil acesso. Para testar a utilidade de E3 num ensaio de diagnóstico, esta deverá ser expressa em quantidade, purificada e usada para produção de anticorpos específicos. Para expressar E3 numa forma solúvel, suscetível de ser purificada num único passo cromatográfico sem proteases, recorreu-se à estratégia da fusão com o domínio de ligação à quitina (CBD)-inteína (IMPACT™ System, NEB). A sequência codificadora de E3 foi amplificada a partir de RNA viral, clonada em pTYB21 e expressa em E. coli como uma proteína de fusão insolúvel de 64 kDa. A expressão a 12ºC induzida por IPTG 0,1 mM aumentou a solubilidade de CBD-inteína-E3. A aplicação de lisados celulares em colunas de quitina originou a retenção de CBD-inteína-E3 na matriz. Porém, a autoclivagem da inteína na coluna, induzida com reagentes tiol, foi pouco eficiente e mesmo a proteína E3 separada não eluiu da coluna. E3 foi ainda expressa em E. coli com uma cauda de seis histidinas (E3[His]6) por clonagem no vetor pET28b(+). Lisados celulares aplicados em colunas de níquel permitiram a eluição de uma proteína de 9 kDa, compatível com a massa molecular estimada para E3[His]6, ainda que com outros contaminantes proteicos. A identidade da proteína de 9 kDa será confirmada pela indução de anticorpos com esta preparação e reatividade daqueles com células infetadas com CHIKV.----------------ABSTRACT: Chikungunya virus (CHIKV) is an enveloped, positive strand RNA virus belonging to the family Togaviridae. Transmitted by Aedes spp mosquitoes, CHIKV causes large epidemics of severe arthritogenic disease in Africa and Asia and represents a serious threat in countries where vectors are present. Symptoms similarity with other diseases, e.g. dengue and malaria, along with CHIKV IgM persistence turns accurate CHIKV diagnosis a difficult task in low-income countries. Detection of E3, a small secreted viral glycoprotein, to be included in an immunoenzymatic test was envisaged as a possible improvement in CHIKV diagnosis. To test the diagnostic value of E3, recombinant E3 should be expressed and purified to generate antibodies. In order to express CHIKV E3 in a soluble form amenable to purification by a single step affinity chromatography, the chitin binding domain (CBD)-intein fusion strategy without proteases (IMPACT™ System, NEB) was employed. The E3 coding sequence was amplified from viral RNA, cloned in pTYB21 and expressed in E. coli ER2566 as an insoluble 64 kDa CBD-intein-E3 fusion protein. Solubility was partially achieved by lowering the expression temperature to 12ºC and the inducer (IPTG) concentration to 0.1 mM. Clarified cell lysate loaded onto a chitin column allowed ligation of the fusion protein but the intein-mediated cleavage efficiency was low and E3 failed to elute from the column as demonstrated by SDS-PAGE. E3 was further expressed with a six histidine tag, E3[His]6, employing the pET System (Novagen). E3[His]6 was expressed in E. coli Rosetta (30ºC, 0.4 mM IPTG) as a 9 kDa protein. Soluble cell extracts in 20-40 mM imidazole, applied onto a nickel column and eluted with 500 mM imidazole yielded a protein preparation enriched in the 9kDa protein. The 9 kDa will be used as antigen to generate antibodies that upon reaction with CHIKV infected cells will confirm its identity.

Towards printed carbon nanotube transistors on paper substrates

This thesis reports the work performed in the optimization of deposition parameters of Multi – Walled Carbon Nanotubes (MWCNT) targeting the development of a Field Effect Transistors (FET) on paper substrates. The CNTs were dispersed in a water solution with sodium dodecyl sulphate (SDS) through ultrasonication, ultrasonic bath and a centrifugation to remove the supernatant and have a homogeneous solution. Several deposition tests were performed using different types of CNTs, dis-persants, papers substrates and deposition techniques, such as spray coating and inkjet printing. The characterization of CNTs was made by Scanning Electron Microscopy (SEM) and Hall Effect. The most suitable CNT coatings able to be used as semiconductor in FETs were deposited by spray coat-ing on a paper substrate with hydrophilic nanoporous surface (FS2) at 100 ºC, 4 bar, 10 cm height, 5 second of deposition time and 90 seconds of drying between steps (4 layers of CNTs were deposited). Planar electrolyte gated FETs were produced with these layers using gold-nickel gate, source and drain electrodes. Despite the small current modulation (Ion/Ioff ratio of 1.8) one of these devices have p-type conduction with a field effect mobility of 1.07 cm2/V.s.