Avaliação multidimensional de idosos : estudo piloto no ambulatório

Arquivos de Medicina 1997; 11(3):167-172

POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

Reliable flow simulation software is inevitable to determine an optimal injection strategy in Liquid Composite Molding processes. Several methodologies can be implemented into standard software in order to reduce CPU time. Post-processing techniques might be one of them. Post-processing a finite element solution is a well-known procedure, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Post-processing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. In previous works influence of smoothness of non-homogeneous Dirichlet condition, imposed on smooth front was examined. However, usually quite a non-smooth boundary is obtained at each time step of the infiltration process due to discretization. Then direct application of post-processing techniques does not improve final results as expected. The new contribution of this paper lies in improvement of the standard methodology. Improved results clearly show that the recalculated flow front is closer to the ”exact” one, is smoother that the previous one and it improves local disturbances of the “exact” solution.

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing a finite element solution is a well-known technique, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Postprocessing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. Consequently such an approach can be exceptionally good in modelling of resin infiltration under quasi steady-state assumption by remeshing techniques and with explicit time integration, because only the free-front normal velocities are necessary to advance the resin front to the next position. The new contribution is the post-processing analysis and implementation of the freeboundary velocities of mesolevel infiltration analysis. Such implementation ensures better accuracy on even coarser meshes, which in consequence reduces the computational time also by the possibility of employing larger time steps.

MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Ultrasound velocity profile (UVP) measurements in shallow open-channel flows

1st European IAHR Congress, 6-4 May, Edinburgh, Scotland

Flow resistance in open-channel flows with mobile hydraulically rough beds

River Flow 2008, Vol.1

The thickness of the transport layer in stratified geomorphic flows

River Flow 2010

Geomorphic dam-break flows. Part II: numerical simulation

Proceedings of the Institution of Civil Engineers - Water Management 163 Issue WM6

Paralisia cerebral na Região de Lisboa e Vale do Tejo : factores de risco : caracterização multidimensional : inclusão escolar

RESUMO - A Paralisia Cerebral (PC) deve ser olhada como uma patologia do neurodesenvolvimento: a infância é um período de actividade exploratória por essência, a restrição motora condiciona as várias áreas do desenvolvimento. Contextos, apoios, oportunidades e experiências de vida serão determinantes no desenvolvimento de todo o seu potencial. Objectivos/finalidade: Identificar, descrever, comparar e analisar factores de risco associados à PC, sua caracterização multidimensional e integração escolar aos 5 e 10 anos. Procurou‐se contribuir para a sua prevenção primária e secundária, e obter dados para planeamento e implementação dos programas de apoio. Métodos: Adoptou‐se a abordagem do Programa Nacional de Vigilância da Paralisia Cerebral (PNVPC) e da Surveillance of Cerebral Palsy in Europe (SCPE). Analisaram‐se factores de risco, competências funcionais, défices associados, severidade e integração escolar de duas populações de Lisboa e Vale do Tejo, (nascimento 1996/1997‐2001/2002 e prevalência aos 5 e 10 anos). Descreveram‐se os dados, efectuaram‐se correlações, aplicaram‐se testes de independência e compararam‐se com dados dos nadovivos, dados nacionais e europeus. Analisaram‐se os factores que influenciaram a integração escolar através de métodos de regressão logística. Resultados/Conclusões/Recomendações: 1,65‰ e 1,57‰ dos nadovivos desenvolveram PC; a prevalência aos 5 anos foi de 1,7‰ e de 1,48‰; 5,9% e 7,9% faleceram antes dos 5 anos. Em 2001/2002 verificou‐se aumento de: PC espástica bilateral‐2/3membros, prematuridade, causa pos‐neonatal, níveis funcionais ligeiros e graves; percentil estaturo‐ponderal <3 (5‐anos). Diminuição de: disquinésia, anóxia e alguns défices associados. Destacaram‐se as associação: prematuridade e PC espástica bilateral‐ 2/3membros; nascer de termo e anóxia, disquinésia, primíparas, défices associados e severidade; infecção pré‐natal e QI<50, epilepsia e severidade; causa pos‐neonatal e PC espástica bilateral‐4membros e múltiplos défices. Aos 5 anos, as variáveis explicativas para a não inclusão escolar foram: QI<50 e epilepsia; uma elevada percentagem de crianças com PC moderada/grave encontrava‐se integrada; 75% das que se encontravam desintegradas mantiveram‐se nesta situação aos 10. Nesta idade, as variáveis explicativas para a não inclusão escolar foram: QI<50 e motricidade fina; 35,1% encontrava‐se fora do ensino regular; 4,5%, embora em idade de escolaridade obrigatória, não frequentavam qualquer estabelecimento escolar. Informação sistematizada, abrangente, objectiva, simples e acessível, sobre novos casos de PC, factores de risco, prevalência em idades‐chave e caracterização multidimensional constitui uma ferramenta clínica e epidemiológica, que deve sustentar as políticas de saúde, educacionais e sociais, contribuindo para a permanência destas crianças no ensino regular, trazendo às crianças e famílias o suporte que as encorajem e sustentem nestes processos. ABSTRACT ------- Cerebral Palsy (CP) must be recognized as a neurodevelopmental disorder: childhood is, on its nature, a period for exploring the environment and therefore motor deficit interferes with all developmental areas. The context, support, opportunities and life experiences are determinants for the development of his full potential. Objective/Aim: To identify, describe, compare and analyze CP risk factors the multidimensional characterization and school integration levels at the age of 5 and 10 years. We aim to contribute to CP primary and secondary prevention and provide information for service planning and implementation of support programs. Methods: The approach of National Cerebral Palsy Surveillance Programme (NCPSP) and Surveillance of Cerebral Palsy in Europe (SCPE) were used. For two groups of children from Lisboa e Vale do Tejo region, birth data 1996/1997‐2001/2002 and prevalence at 5 and 10 years, were analyzed: CP risk factors, functional ability, associated impairments, severity and school integration settings. Data collected was described, analyzed using correlations, applied tests of independence and compared with new born data, national data and european data. To analyze the factors related to school inclusive settings, logistic regression was appealed. Results/Conclusions/Recommendations: 1,65% and 1,57‰ of the new‐born alive developed CP. The prevalence at 5 years was 1,7‰ and 1,48‰ 5,9% and 7,9% died before their 5th birthday. Bilateral spastic CP 2/3limb, preterm birth, cases of post‐neonatal origin, mild and sever functional impairment; weight and height percentile <3 at 5 years old Increased in 2001. Decreased dyskinetic CP, anoxia and some additional imparments. Were identified among other the association between prematurity and spastic bilateral CP‐2/3 members; born at term and anoxia, dyskinetic CP, first child, associated impairments and severity; prenatal infection and IQ<50, epilepsy and severity; post‐neonatal cause and spastic bilateral CP‐4 members and associated impairments. At 5‐years‐old the more explanatory variables for not be in a school inclusive settings were IQ<50 and epilepsy, a high percentage of children with moderate/severe CP was attending regular school, but most children who were out of inclusive settings at 5 years continue on this situations at 10‐years‐old. At this age the more explanatory variables for not be in a school inclusive settings were: IQ<50 and upper limb function; 35,1% were out of regular school; 4,5%, even in compulsory school age, are out of school. Standardized comprehensive, objective, simple and accessible information about CP new cases, risk factors, prevalence in the key‐age and children multidimensional characterization constitutes a clinical and epidemiological tool that should sustain health, educational and social policy. This would support the continuity of these children in regular schools, encouraging g them and their families in these processes.

Geomorphic dam-break flows. Part I: conceptual model

Proceedings of the Institution of Civil Engineers - Water Management 163 Issue WM6

Mathematical modelling of shallow flows: closure models drawn from grain-scale mechanics of sediment transport and flow hydrodynamics

Canadian Journal of Civil Engineering 36(10) 1605–16

Multidimensional scalling

Neste trabalho faz-se uma breve revisão dos principais métodos de Multidimensional Scaling, exploram-se alguns exemplos ilustrativos, descrevem-se alguns desenvolvimentos recentes e especular-se sobre o futuro desta matéria.

Atitudes, conhecimentos e práticas dos médicos de família face aos rastreios de autonomia funcional multidimensional em pessoas idosas

RESUMO - O envelhecimento demográfico é uma constatação e ao mesmo tempo uma oportunidade para viver de forma mais saudável e autónoma o mais tempo possível. A principal razão para a admissão de pessoas idosas em instituições e para o uso desproporcionado de serviços de saúde é o declínio funcional que acompanha o envelhecimento. Os Cuidados de Saúde Primários apresentam‐se como contexto ideal para promover cuidados antecipatórios. A avaliação da autonomia funcional multidimensional permite a detecção de perturbações incipientes. Os programas de rastreios facilitam o desencadear de recursos para a detecção precoce e tratamento. Os médicos sentem diversas barreiras na aplicação dos rastreios, como a falta de familiaridade com os testes, bem como a falta de tempo ou recursos. O estudo aqui proposto visa conhecer, a título exploratório, as atitudes dos médicos de família face aos rastreios de autonomia funcional multidimensional em pessoas idosas; avaliar o grau de conhecimento sobre esta abordagem multidimensional, no que diz respeito às áreas e instrumentos a avaliar; caracterizar as práticas na prestação de cuidados preventivos às pessoas idosas e caracterizar as condições genéricas necessárias para a aplicação destes rastreios no contexto dos cuidados de saúde primários. Para tal, irá basear‐se num questionário auto‐administrado aos médicos de família dos 22 Agrupamentos de Centros de Saúde, na Região de Saúde de Lisboa e Vale do Tejo. As suas conclusões poderão contribuir para uma uniformização do conceito de autonomia funcional multidimensional e para a realização de um levantamento de necessidades de formação sobre a abordagem multidimensional e interdisciplinar.

Policies, policy-makers and financial flows: An empirical examination

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics