6 resultados para Mineralogy, Determinative.


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The different types of Archean gold deposits in the Manica greenstone belt of western Mozambique are briefely describcd in the context of their geological setting. Particular attention is devoted to the mineralogy, petrology, geological controls, refractoriness to treatment and prospection of these gold deposits. The genesis of gold was stratigraphically controled, but structural and metamorphic events related to the intrusion of late granites have concentrated and relocated the gold in different geological environments. The possibility of additional gold occurences in different rocks sequences is discussed as well as possible guidelines for future research and development.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Palaeogeographic and tectono-sedimentary interpretation of northern Portugal, in which previous studies (geomorphology, lithostratigraphy, mineralogy, sedimentology, palaeontology, etc.) were considered, is here proposed. Cenozoic shows different features according to its morphotectonic setting in the eestern region (Trás-os-Montes) or near to the Atlantic coast (western region, Minho and Douro Litoral areas). Although in the eastern region the sedimentary record is considered late Neogene, in some places Paleogene (?) was identified. This oldest record, represented by alluvial deposits, was preserved from complete erosion because of its position inside Bragança-Vilariça-Manteigas fault zone grabens. Later sedimentary episodes (upper Tortonian-Zanclean ?), represented by two allostratigraphical units, were interpreted as proximal fluvial braided systems of an endorheic hydrographic network, draining to the Spanish Duero Basin (eastwards); nowadays, they still remained in tectonic depressions and incised-valleys. Later on, eastern sedimentation becomes scarcer because Atlantic fluvial systems (e.g. the pre-Douro), successively, captured previous endorheic drainages. The proximal reaches of the allostratigraphic unit considered Placencian is recorded in Mirandela (western Trás-os-Montes) but the following fluvial episode (Gelasian-early Pleistocene ?) was already documented in east Trás-os-Montes, preserved in high platforms and in tectonic depressions. Placencian and Quaternary sedimentary records in the western coastal zone, mainly represented by terraces, are located in the Minho, Lima, Alverães, Cávado and Ave large fluvial valleys and in the Oporto littoral platform. In conclusion, northern Portugal Tertiary sedimentary episodes were mainly controlled by tectonics, but later on (Placencian-Quaternary) also by eustasy.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Mineralogical assemblages, specially clay mineral assemblages, have been widely used in multidisciplinary stratigraphical studies. This paper presents the results obtained in the study of a Lower Cretaceous depositional sequence from the Lusitanian Basin (Portugal). The Upper Hauterivian – Lower Barremian section at Guincho Fort pertains mostly to the Ha7 3rd order depositional sequence defined by J. REY & al. (2003) and has been studied in a detailed bed-by-bed sampling corresponding to a total of 85 samples. The analysis of the obtained clay mineral assemblages has contributed to the paleoenvironmental and paleogeographical reconstruction of the studied interval and has improved the sequence stratigraphic interpretation and positioning of sequence boundaries and other sequential surfaces (transgressive and flooding surfaces).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due to their high adsorption capacity of water vapor, earthen plasters can act as a moisture buffer, contributing to balance the relative humidity of the indoor environment of buildings. As a consequence of this capacity earthen plasters may also contribute to the perception of thermal comfort, since a high relative humidity increases the thermal conductivity of air and restricts skin evaporation, increasing the discomfort associated with the perception of heat or cold. Simultaneously, earthen plasters may also contribute to the indoor air quality. In one hand, by mitigating health problems of the respiratory system associated with indoor environment with high relative humidity, in which increases the risk of development of microorganisms usually responsible for infections, allergies or asthma. In the other hand, by mitigating the probability of inflammation of the respiratory system airways associated to exceedingly dry indoor environments. Therefore it also becomes expectable that earthen plasters may contribute for reducing the needs for air conditioning and mechanical ventilation in buildings and, thereby, also allowing the reduction of the associated energy consumption. The «Barrocal» region, located in the sedimentary basin of Algarve, South Portugal, presents geomorphological characteristics that promote the occurrence of soils with a clay mineralogy dominated by illite, which is a clay mineral characterized by a high adsorption capacity of water vapor and low expansibility. This fact turns expectable that these soils have a high potential for interior plastering. In order to evaluate this potential four mortars were formulated with an increasing content of clayey soil extracted from a selected clay quarry from «Barrocal» region. The results from the preliminary characterization campaign confirmed the reduced linear shrinkage of these mortars, as well as their high adsorption-desorption capacity, that is positively correlated with the content of clayey soil present in mortar formulation. However, the mechanical tests showed that the mechanical resistance of these mortars should be improved, for instance through the addition of natural fibers for reinforcement, which will be investigated in future research. This research contributed to increase certainty regarding the potential of clayey soils of the «Barrocal» sub-region of Algarve to produce mortars suitable for eco-efficient interior plastering.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Clayish earth-based mortars can be considered eco-efficient products for indoor plastering since they can contribute to improve important aspects of building performance and sustainability. Apart from being products with low embodied energy when compared to other types of mortars used for interior plastering, mainly due to the use raw clay as natural binder, earth-based plasters may give a significant contribution for health and comfort of inhabitants. Due to high hygroscopicity of clay minerals, earth-based mortars present a high adsorption and desorption capacity, particularly when compared to other type of mortars for interior plastering. This capacity allows earth-based plasters to act as a moisture buffer, balancing the relative humidity of the indoor environment and, simultaneously, acting as a passive removal material, improving air quality. Therefore, earth-based plasters may also passively promote the energy efficiency of buildings, since they may contribute to decreasing the needs of mechanical ventilation and air conditioning. This study is part of an ongoing research regarding earth-based plasters and focuses on mortars specifically formulated with soils extracted from Portuguese ‘Barrocal’ region, in Algarve sedimentary basin. This region presents high potential for interior plastering due to regional geomorphology, that promote the occurrence of illitic soils characterized by a high adsorption capacity and low expansibility. More specifically, this study aims to assess how clayish earth and sand ratio of mortars formulation can influence the physical and mechanical properties of plasters. For this assessment four mortars were formulated with different volumetric proportions of clayish earth and siliceous sand. The results from the physical and mechanical characterization confirmed the significantly low linear shrinkage of all the four mortars, as well as their extraordinary adsorption-desorption capacity. These results presented a positive correlation with mortars´ clayish earth content and are consistent with the mineralogical analysis, that confirmed illite as the prevalent clay mineral in the clayish earth used for this study. Regarding mechanical resistance, although the promising results of the adhesion test, the flexural and compressive strength results suggest that the mechanical resistance of these mortars should be slightly improved. Considering the present results the mortars mechanical resistance improvement may be achieved through the formulation of mortars with higher clayish earth content, or alternatively, through the addition of natural fibers to mortars formulation, very common in this type of mortars. Both those options will be investigated in future research.