Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

The detrital origin of the Moncorvo ordovician ironstones

The Moncorvo Ordovician ironstones in northeastern Portugal consist of iron ore sedimentary horizons frequently interbanded with psamites and quartzites. Ore reserves may probably exceed 1 000 million tonnes and this makes Moncorvo the largest iron ore deposit in the European Union. Compact poorly banded massive layers may exceed 90 meters in thickness which is quite an extraordinary feature for a Phanerozoic deposit. If the thickness of Precambrian deposits may reach a few hundred meters, the thickness of Phanerozoic deposits never exceed a maximum of 15 meters generally forming a number of comparatively thin layers confined to a particular member of a sedimentary sequence. A detailed microscopic analysis of the ores revealed that initially a compact magnetite/quartzite layer, detrital in character (the magnetite occasionally showing chromite cores), was deposited by entrapment in near shore lagoons where rivers debouched, rather than in the open sea. This stage was followed by oscilating and transgressive shore lines which gave rise to breaks in sedimentation in combined river delta and shallow water marine environment where detrital material and fine iron oxide and clay suspensions were deposited in fluctuating environments. These events gave rise to layers of both magnetite (martite) and specularite intergrown with quartz, silicates and phosphates. Textural and mineralogical studies show that the deposits consist of ferruginous clastic sediments and are not chemically deposited cherts. Field, geological and palaeontological evidence also supports a detrital origin, the facies being typical of zones rich in oxygen and close to the feeding continent. The uncommon huge development of Moncorvo was due to the fact that the deposits occur in restricted basins on a continental platform were clastic sediments were predominantly deposited. Not only morphologically but also chemically the deposits are more similar to Precambrian iron formations than to Phanerozoic ironstones.

Thermodynamic and kinetic modelling of the redox properties of tetrahaem cytochromes C3

Dissertação apresentada para obtenção do grau de Doutor em Bioquímica,especialidade Bioquímica-Física, pela Universidade Nova de Lisboa, Faculdade de Cincias e Tecnologia

Electrical ageing studies of polymeric insulation for power cables (estudo do envelhecimento eléctrico do isolante polimérico de cabos eléctricos

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Física - Física Aplicada pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Vascularização do útero: estudo morfológico e experimental

RESUMO Os trabalhos de investigação, conducentes à elaboração do presente estudo morfofuncional, subordinado ao tema da "VASCULARIZAÇÃO ARTERIAL DO ÚTERO",fundamenta-se em conceitos da anatomia descritiva clássica, complementados por técnicas de estudo mais modernas, permitindo-nos observações originais. O principal objectivo é de definir um padrão descritivo da vascularização uterina e de estabelecer uma correlação anatomo-fisiológica e anatomo-clínica na descrição da angiomorfologia uterina, actualizando as descrições clássicas da artéria com dados de observação originais, segundo as técnicas de estudo angiomorfológicas correntemente empregues no Departamento de Anatomia da Faculdade de Ciências Médicas da Universidade Nova de Lisboa. Correlacionam-se as observações com os mais recentes dados publicados, no âmbito da imuno-histoquímica e da moderna bioquímica endocrinológica, uma vez que os conceitos modernos de fisiologia uterina e ginecológica praticamente dominam a vasta literatura científica mundial. Como objectivos particulares, ou linhas orientadoras da tese, escolhemos: - A definição de parâmetros descritivos do padrão genérico da vascularização uterina, actualizando a nomenclatura descritiva de acordo com a moderna Nomina Anatomica mundialmente debatida, desde o XIV Congresso Internacional da Federação Internacional das Associações de Anatomistas, sob a presidência do Prof. Doutor J.A. Esperança Pina (1994) e publicada em 1999-2001. - A comparação do caso humano com o do animal de experiência, por observação meticulosa do maior número de casos possíveis, realizando um estudo comparativo que nos permita extrapolar dados de experimentação animal para o caso humano; - O estabelecimento de uma correlação anatomo-fisiológica, por análise do comportamento da vascularização uterina, ao longo da vida, desde o nascimento até à menopausa, e perante as influências hormonais a que se encontra exposta. A tese constrói-se em torno de três núcleos fundamentais: 1. Um capítulo introdutório, de contextualização teórica, por enquadramento histórico dos estudos dos órgãos genitais femininos e da evolução das técnicas de diagnóstico e terapêutica do útero, focando as primeiras referências à técnica da histerotomia (Cesariana) (com a lenda persa do nascimento do herói Rostam, ou do nascimento do deus Asclepius), as primeiras representações da vascularização uterina (por LEONARDO e iii VESÁLIO), ou as primeiras descrições anatómicas do útero, da autoria de Portugueses (RODRIGO DE CASTRO, 1516 e AMATO LUSITANO, 1551). Prossegue a contextualização teórica com breve referência à recente evolução das técnicas de diagnóstico e terapêutica dos fibromiomas uterinos, mencionando de modo particular a evolução das técnicas de embolização arterial uterina, por nos parecer corresponder a um campo de aplicação imediata dos estudos da vascularização do útero. Termina este capítulo com breve referência aos trabalhos do Prof. Doutor J. MARTINS PISCO que tem actualmente, no nosso País uma das mais extensas listas de trabalhos efectuados com sucesso a nível mundial, no campo da embolização arterial de fibromiomas uterinos. 2. O segundo núcleo fundamental, intitulado "Angiomorfologia uterina" corresponde a extensa revisão bibliográfica dos estudos descritivos da vascularização uterina, desde logo ilustrando a resenha teórica com algumas imagens fotográficas de úteros humanos, seleccionadas da nossa colecção. A descrição da vascularização uterina, fundamentada em 1500 citações bibliográficas, organiza-se, de acordo com o paralelismo entre a estratificação histológica e angiológica do órgão, e a hierarquia funcional, regulada pelas cíclicas variações hormonais. Descreve-se a camada serosa e correspondente vascularização; a camada muscular e vascularização do miométrio; e, por fim, a camada mucosa e os vasos endometriais. Verifica-se, perante os dados colhidos da literatura mundial, o interesse do aprofundamento dos estudos morfológicos da microvascularização endometrial e da adaptação das descrições aos resultados dos modernos estudos funcionais obtidos por técnicas da imuno-histoquímica. 3. Fundamentados nos dados colhidos das revisões bibliográficas, elaborámos um projecto de investigação original, visando o estabelecimento da relação morfo-funcional resultante do aprofundamento dos estudos descritivos da angiomorfologia e da microvascularização do útero. O capítulo de trabalho experimental organiza-se em três principais passos: – No capítulo de Materiais e métodos, procede-se à escolha, por um lado do animal de experiência mais adequado para os estudos da vascularização uterina (por estudo comparativo ao longo da escala animal) e, por outro lado, à escolha de três das técnicas disponíveis no Laboratório de Anatomia Experimental e aplicáveis à investigação angiomorfológica do útero; iv - No capítulo de Resultados, procedemos à exposição das nossas observações de 25 úteros humanos e de 154 úteros de animais de experiência, segundo as três técnicas seleccionadas (dissecção, Injecção-corrosão-fluorescência, Injecção-diafanização e injecção-corrosão paraobservação de moldes vasculares em microscopia electrónica de varrimento), organizando aselecção da vasta iconografia coleccionada em três novos subcapítulos: o útero humano, oútero do animal de experiência e um estudo comparativo, essencial para validar osresultados do trabalho experimental. - O capítulo de trabalho experimental, inteiramente efectuado por estudos na artéria uterina do rato Wistar, abrange primeiramente a tentativa de definição macroscópica de territórios de vascularização, seguido das observações microscópicas conducentes à definição dos parâmetros angiomorfológicos característicos de cada uma das etapas da grande variabilidade a que se sujeita a vascularização uterina, ao longo da vida, incluindo a infância, a gravidez, a paridade e o envelhecimento, e consoante as fases do ciclo hormonal ovárico. Aperfeiçoámos essa tarefa com a elaboração de três experiências distintas, para análise dos efeitos microvasculares uterinos da administração exógena de preparados comerciais hormonais, por observação em microscopia electrónica de varrimento. De acordo com as leituras da literatura clássica sobre a metodologia do trabalho científico, completamos os trabalhos por um capítulo de síntese e critica dos resultados, sequencialmente organizado consoante cada um dos passos experimentais atrás referidos. SUMMARY The aim of the present thesis is the description of the uterine arterial network, complementing the classical concepts of descriptive Anatomy with modern techniques of anatomical research, thus achieving original final results and observations. One of the main objectives of the research is to establish physiological and clinical correlations in the description of the uterine angiomorphology, with the techniques currently available for angiomorphological research in the Department of Anatomy of Faculty of Medical Sciences of the New University of Lisbon. As guidelines to our research, we established the following specific objectives: - defining the descriptive parameters of the standard pattern of the uterine vasculature, according to the modern Nomina Anatomica, as underlined in the latest Federative Congresses of the International Federation of the Associations of Anatomists, one of which took place in Lisbon, in 1994, under the presidency of Professor J.A. Esperança Pina, the supervisor of the present works; - comparing the human uterus with the uterus of the experimental animal, to extrapolate the experimental observations in animals to the particular case of the human uterus; - establishing a correlation between the physiology and the anatomical observations of the uterine vasculature throughout life, from childhood to menopause and in relation to the hormonal influences to which the uterus is exposed. The thesis is built around three main chapters: 1) The introduction chapter defines the historical framework of the studies of the female genital anatomy and the historical evolution of the clinical management of common uterine diseases, focusing on the first historical references to the Caesarean section (such as the Persian legend of the birth of the hero ROSTAM, or that of the birth of ASCLEPIUS, the Greek god of Medicine); the first depictions of the uterine vasculature (by LEONARDO and VESALIUS) or the first anatomical descriptions of the uterus, by Portuguese authors (RODRIGO DE CASTRO, 1517, or AMATUS LUSITANUS, 1551). The theoretical context proceeds, with reference to the recent evolution of the clinical and surgical management of uterine fibroids, and a particular mention to the modern techniques of Uterine Fibroid Embolisation, which corresponds to one of the fields of interest of the anatomic studies of uterine arterial vascularization. 2) The second chapter, devoted to the anatomical description of the Uterine Angiomorphology, is based on an extensive review of the available Medical literature,illustrated by a selection of our own research observations of the human uterine vasculature. The description is organized in view of the parallelism between histological and angiological stratification and the functional hierarchy, under the control of the cyclic hormonal variations. Each layer of the uterine wall is depicted with photographs of the human uterus and descriptions of its specific vascular network: the serosa, the muscular Myometrium, and the mucosa, or endometrium. This classical description, based on extensive quotations of the international scientific literature, enhances our interest for the research of a more detailed knowledge of the endometrial microvascular network, accordingly to the modern physiologic results obtained through immunohistochemical studies. 3) The results of our experimental research, aiming to establish the intimate relationship between the anatomical and functional studies of uterine vasculature, are organized in three main steps: - The chapter of Materials and Methods debates the choice of the experimental animal, based on a short review of the comparative anatomy of the uterus, and uterine physiology, throughout the animal scale. The selection of three fundamental techniques of anatomic research is made from the current variety available in the Laboratory of Experimental Anatomy of the Lisbon School of Medical Sciences. - The Results of our personal research and observations of 25 human and 154 animal uteri,after dissection, and the techniques of arterial injection for the preparation of fluorescent corrosion casts, of vascular injection and clearing, and of arterial injection and preparation of corrosion casts for Scanning Electron Microscopy are rganized in terms of human or animal macroscopic anatomy and microvascular network, followed by a summary of the comparative anatomy of human and rat uteri, which is essential to validate the resultant experimental observations of the rat endometrial microvasculature. - The experimental research is entirely devoted to the uterine artery of the Wistar rat. The first step consists of the attempt to define macroscopic territories of vascularization, followed by microscopic observations for the definition of the angiomorphological pattern that is characteristic of each stage of the extreme variations to which the uterus is subject throughout life, from childhood to sexual maturity, throughout the hormonal cycle, in pregnancy, according to parity, and through ageing. We complete these observations with the experimental exposure of the Wistar rat uterus to pharmacologic preparations of hormones, currently available in clinical practice, and observations of the vascular uterine changes in Scanning Electron Microscopy. The outcome results of our anatomical observations are followed by a critical synthesis of the results.

Printed electronics for ubiquitous computing applications

Dissertação para obtenção do Grau de Doutor em Química

Enrichment of a PHA producing microbial community in a continuous bioreactor setup

Polyhydroxyalkanoates (PHAs) are biosynthetic polyesters, biodegradable and biocompatible making them of great interest for industrial purposes. The use of low value substrates with mixed microbial communities (MMC) is a strategy currently used to decrease the elevated PHA production costs. PHA production process requires an important step for selection and enrichment of PHA-storing microorganisms which is usually carried out in a Sequencing Batch Reactor (SBR). The aim of this study was to optimize the PHA accumulating culture selection stage using a 2-stage Continuous Stirrer Tank Reactor (CSTR) system. The system was composed by two separate feast and famine bioreactors operated continuously, mimicking the feast and famine phases in a SBR system. Acetate was used as carbon source and biomass seed was highly enriched in Plasticicumulans acidivorans obtained from activated sludge. The system was operated under two different sets of conditions (setup 1 and 2), maintaining a system total retention time of 12 hours and an OLR of 2.25 Cmmol/L.h-1. An average PHB-content of 3.3 % wt was obtained in setup 1 and 4.8% wt in setup 2. Several other experiments were performed in order to better understand the continuous system behaviour, using biomass from the continuous system. With the fed-batch experiment a maximum of 8.1% PHB was stored and the maximum substrate uptake and specific growth rates obtained in the growth experiment (1.15 Cmol Cmol-1.h-1 and 0.53 Cmol Cmol-1.h-1) were close to the ones from continuous system (1.12 Cmol Cmol-1.h-1 and 0.59 Cmol Cmol-1.h-1). The microbial community was characterized trough microscopic visualization, Denaturing Gradient Gel Electrophoresis (DGGE) analysis and Fluorescent in situ hybridization (FISH). The last studied performed mimicked the continuous system by building up a SBR system with all the same operational conditions while adding an extra acetate dosage during the 12 h cycle, simulating the substrate passing from the feast to the famine reactors under continuous operation. It was shown that possibly the continuous system was not able to efficiently select for PHB storing organisms under the operational conditions imposed, although the selected culture was capable of consuming the substrate and grow fast. This main conclusion might have resulted from two major factors affecting the system performance: the ammonium concentration in the Feast reactor and the amount of substrate leaching from the Feast to the Famine reactor.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Cellulose nanorods in liquid crystalline elastomers for improved actuators

Nanotechnology plays a central role in ‘tailoring’ materials’ properties and thus improving its performances for a wide range of applications. Coupling nature nano-objects with nanotechnology results in materials with enhanced functionalities. The main objective of this master thesis was the synthesis of nanocrystalline cellulose (NCCs) and its further incorporation in a cellulosic matrix, in order to produce a stimuli-responsive material to moisture. The induced behaviour (bending/unbending) of the samples was deeply investigated, in order to determine relationships between structure/properties. Using microcrystalline cellulose as a starting material, acid hydrolysis was performed and the NCC was obtained. Anisotropic aqueous solutions of HPC and NCC were prepared and films with thicknesses ranging from 22μm to 61μm were achieved, by using a shear casting technique. Microscopic and spectroscopic techniques as well as mechanical and rheological essays were used to characterize the transparent and flexible films produced. Upon the application of a stimulus (moisture), the bending/unbending response times were measured. The use of NCC allowed obtaining films with response times in the order of 6 seconds for the bending and 5 seconds for the unbending, improving the results previously reported. These promising results open new horizons for building up improved soft steam engines.