Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal

Automatic learning for the classification of chemical reactions and in statistical thermodynamics

This Thesis describes the application of automatic learning methods for a) the classification of organic and metabolic reactions, and b) the mapping of Potential Energy Surfaces(PES). The classification of reactions was approached with two distinct methodologies: a representation of chemical reactions based on NMR data, and a representation of chemical reactions from the reaction equation based on the physico-chemical and topological features of chemical bonds. NMR-based classification of photochemical and enzymatic reactions. Photochemical and metabolic reactions were classified by Kohonen Self-Organizing Maps (Kohonen SOMs) and Random Forests (RFs) taking as input the difference between the 1H NMR spectra of the products and the reactants. The development of such a representation can be applied in automatic analysis of changes in the 1H NMR spectrum of a mixture and their interpretation in terms of the chemical reactions taking place. Examples of possible applications are the monitoring of reaction processes, evaluation of the stability of chemicals, or even the interpretation of metabonomic data. A Kohonen SOM trained with a data set of metabolic reactions catalysed by transferases was able to correctly classify 75% of an independent test set in terms of the EC number subclass. Random Forests improved the correct predictions to 79%. With photochemical reactions classified into 7 groups, an independent test set was classified with 86-93% accuracy. The data set of photochemical reactions was also used to simulate mixtures with two reactions occurring simultaneously. Kohonen SOMs and Feed-Forward Neural Networks (FFNNs) were trained to classify the reactions occurring in a mixture based on the 1H NMR spectra of the products and reactants. Kohonen SOMs allowed the correct assignment of 53-63% of the mixtures (in a test set). Counter-Propagation Neural Networks (CPNNs) gave origin to similar results. The use of supervised learning techniques allowed an improvement in the results. They were improved to 77% of correct assignments when an ensemble of ten FFNNs were used and to 80% when Random Forests were used. This study was performed with NMR data simulated from the molecular structure by the SPINUS program. In the design of one test set, simulated data was combined with experimental data. The results support the proposal of linking databases of chemical reactions to experimental or simulated NMR data for automatic classification of reactions and mixtures of reactions. Genome-scale classification of enzymatic reactions from their reaction equation. The MOLMAP descriptor relies on a Kohonen SOM that defines types of bonds on the basis of their physico-chemical and topological properties. The MOLMAP descriptor of a molecule represents the types of bonds available in that molecule. The MOLMAP descriptor of a reaction is defined as the difference between the MOLMAPs of the products and the reactants, and numerically encodes the pattern of bonds that are broken, changed, and made during a chemical reaction. The automatic perception of chemical similarities between metabolic reactions is required for a variety of applications ranging from the computer validation of classification systems, genome-scale reconstruction (or comparison) of metabolic pathways, to the classification of enzymatic mechanisms. Catalytic functions of proteins are generally described by the EC numbers that are simultaneously employed as identifiers of reactions, enzymes, and enzyme genes, thus linking metabolic and genomic information. Different methods should be available to automatically compare metabolic reactions and for the automatic assignment of EC numbers to reactions still not officially classified. In this study, the genome-scale data set of enzymatic reactions available in the KEGG database was encoded by the MOLMAP descriptors, and was submitted to Kohonen SOMs to compare the resulting map with the official EC number classification, to explore the possibility of predicting EC numbers from the reaction equation, and to assess the internal consistency of the EC classification at the class level. A general agreement with the EC classification was observed, i.e. a relationship between the similarity of MOLMAPs and the similarity of EC numbers. At the same time, MOLMAPs were able to discriminate between EC sub-subclasses. EC numbers could be assigned at the class, subclass, and sub-subclass levels with accuracies up to 92%, 80%, and 70% for independent test sets. The correspondence between chemical similarity of metabolic reactions and their MOLMAP descriptors was applied to the identification of a number of reactions mapped into the same neuron but belonging to different EC classes, which demonstrated the ability of the MOLMAP/SOM approach to verify the internal consistency of classifications in databases of metabolic reactions. RFs were also used to assign the four levels of the EC hierarchy from the reaction equation. EC numbers were correctly assigned in 95%, 90%, 85% and 86% of the cases (for independent test sets) at the class, subclass, sub-subclass and full EC number level,respectively. Experiments for the classification of reactions from the main reactants and products were performed with RFs - EC numbers were assigned at the class, subclass and sub-subclass level with accuracies of 78%, 74% and 63%, respectively. In the course of the experiments with metabolic reactions we suggested that the MOLMAP / SOM concept could be extended to the representation of other levels of metabolic information such as metabolic pathways. Following the MOLMAP idea, the pattern of neurons activated by the reactions of a metabolic pathway is a representation of the reactions involved in that pathway - a descriptor of the metabolic pathway. This reasoning enabled the comparison of different pathways, the automatic classification of pathways, and a classification of organisms based on their biochemical machinery. The three levels of classification (from bonds to metabolic pathways) allowed to map and perceive chemical similarities between metabolic pathways even for pathways of different types of metabolism and pathways that do not share similarities in terms of EC numbers. Mapping of PES by neural networks (NNs). In a first series of experiments, ensembles of Feed-Forward NNs (EnsFFNNs) and Associative Neural Networks (ASNNs) were trained to reproduce PES represented by the Lennard-Jones (LJ) analytical potential function. The accuracy of the method was assessed by comparing the results of molecular dynamics simulations (thermal, structural, and dynamic properties) obtained from the NNs-PES and from the LJ function. The results indicated that for LJ-type potentials, NNs can be trained to generate accurate PES to be used in molecular simulations. EnsFFNNs and ASNNs gave better results than single FFNNs. A remarkable ability of the NNs models to interpolate between distant curves and accurately reproduce potentials to be used in molecular simulations is shown. The purpose of the first study was to systematically analyse the accuracy of different NNs. Our main motivation, however, is reflected in the next study: the mapping of multidimensional PES by NNs to simulate, by Molecular Dynamics or Monte Carlo, the adsorption and self-assembly of solvated organic molecules on noble-metal electrodes. Indeed, for such complex and heterogeneous systems the development of suitable analytical functions that fit quantum mechanical interaction energies is a non-trivial or even impossible task. The data consisted of energy values, from Density Functional Theory (DFT) calculations, at different distances, for several molecular orientations and three electrode adsorption sites. The results indicate that NNs require a data set large enough to cover well the diversity of possible interaction sites, distances, and orientations. NNs trained with such data sets can perform equally well or even better than analytical functions. Therefore, they can be used in molecular simulations, particularly for the ethanol/Au (111) interface which is the case studied in the present Thesis. Once properly trained, the networks are able to produce, as output, any required number of energy points for accurate interpolations.

Preliminary study on the production of functionally graded materials by friction stir processing

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

A study on metallurgy and corrosion of ancient copper-based artefacts from the portuguese territory

Dissertação apresentada para a obtenção do Grau de Doutor em Conservação e Restauro, especialidade Ciências da Conservação, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Patologia óssea do insuficiente renal crónico: desafio clínico-biológico ; Caracterização da osteodistrofia renal e efeitos da biocompatibilidade de membranas de hemodiálise, na remodelação óssea

Resumo: Os resultados das nossas investigações, apresentadas ao longo desta dissertação,contribuíram para a otimização do diagnóstico invasivo e não invasivo da osteodistrofia renal e permitiram evidenciar a relevância, para a expressão clínica e histológica da ODR, de algumas articularidades específicas da população hemodialisada, nomeadamente: a utilização de membranas de hemodiálise mais biocompatíveis e com elevada permeabilidade, o recurso a técnicas de hemodiafiltração com otimização da capacidade convectiva, as limitações dos marcadores bioquímicos de remodelação óssea ou a insuficiência / deficiência em vitamina D nativa (bem como os resultados da suplementação com esta vitamina). Testámos, pela primeira vez em doentes hemodialisados, novos marcadores da formação e reabsorção óssea, que validámos mediante a comparação com os resultados da histomorfometria óssea. No seu conjunto, e de forma integrada, as nossas investigações permitiram-nos: - Evidenciar a diminuição da expressão do recetor da PTH/PTHrP na cartilagem de crescimento, num modelo animal de IRC, o que explica, pelo menos em parte, o atraso de crescimento observado nesta patologia, bem como a diminuição da resposta à ação da PTH; - Demonstrar as vantagens da determinação da isoforma óssea da fosfatase alcalina, em relação à fosfatase alcalina total, no diagnóstico diferencial entre baixa e elevada remodelação óssea; - Utilizar, pela primeira vez em hemodialisados, a piridinolina e a desoxipiridinolina no diagnóstico da reabsorção óssea. Este foi o primeiro marcador sérico específico da atividade osteoclástica, utilizado com sucesso em doentes anúricos em hemodiálise. Evidenciámos uma excelente correlação destes dois marcadores bioquímicos com a superfície osteoclástica e com o número de osteoclastos/mm2;- Demonstrar as acentuadas limitações de outros marcadores da formação e reabsorção óssea (nomeadamente a osteocalcina, o propeptido carboxiterminal do procolagénio tipo I-PICP, e o Telopeptido do colagénio tipo I – ICTP) com base nas correlações entre os doseamentos séricos ou plasmáticos destes marcadores e a biópsia óssea com avaliação histomorfométrica; -Evidenciar as limitações induzidas pela sobrecarga alumínica na interpretação dos níveis séricos dos marcadores não invasivos da remodelação óssea;-Testar a eficácia e segurança da utilização de “microdoses” de desferroxamina na terapêutica da intoxicação alumínica, em doentes com acentuada exposição a este metal;-Demonstrar que os doentes hemodialisados cronicamente com dialisadores de poliacrilonitrilo (membranas de alta permeabilidade),apresentavam menor ativação osteoblástica e osteoclástica, que os doentes dialisados com membranas de cuprofano(baixa permeabilidade), sendo os níveis de iPTH semelhantes em ambos os grupos estudados. Estes resultados apontam para uma menor ativação da remodelação óssea quando se utilizam membranas de hemodiálise mais biocompatíveis e/ou de maior permeabilidade, o que se poderá relacionar com a ultrafiltração de mediadores da ativação celular ou com a menor ativação dos mecanismos estimuladores da remodelação óssea, por parte destas membranas. Entre os mediadores da remodelação óssea que demonstrámos serem relevantes e estarem aumentados no soro de hemodialisados com membranas de baixo fluxo, contam-se a beta-2-microglobulina (2-M) e algumas citoquinas, com ação estimuladora das linhagens celulares envolvidas na remodelação óssea. Demonstrámos igualmente uma correlação positiva dos níveis séricos de 2-M com os níveis séricos da osteocalcina, da isoenzima óssea da fosfatase alcalina (marcadores da formação óssea) e com os níveis séricos da piridinolina (marcador da reabsorção óssea). Os níveis séricos de 2-M correlacionaram-se ainda, de forma negativa, com o volume osteoide (matriz óssea não calcificada). Nestes doentes hemodialisados, demonstrámos a presença de níveis séricos aumentados da interleucina-1, do antagonista do recetor da interleucina-1, da interleucina-6 e do recetor solúvel da interleucina-6. Salientamos as relações inversas que observámos, por um lado entre os níveis de antagonista do recetor da interleucina-1 e a superfície osteoblástica, e por outro lado entre o rácio do recetor da interleucina-6 / interleucina-6 (IL6-r/IL6) e a superfície osteoclástica. De acordo com estes nossos resultados originais, entendemos que a interferência nos níveis circulantes e na ativação local destes mediadores poderá justificar, em grande parte, o aumento da prevalência de doença óssea adinâmica, descrita por nós e por outros grupos. Evidenciámos uma elevadíssima prevalência de doença adinâmica (>50% dos doentes), numa população de hemodialisados sem exposição prévia ao alumínio, tratados de acordo com os K/DOQI “guidelines” e que ao longo de um ano mantiveram níveis séricos de cálcio e de fósforo controlados. Consequentemente, os doentes tratados de forma otimizada apresentaram uma prevalência surpreendentemente elevada de doença adinâmica. Os nossos resultados (classificados com o grau de evidência máxima pelos peritos KDIGO) contribuíram para dar suporte à grande diferença nos guidelines K/DOQI (2003) e KDIGO (2009) no que respeita aos valores alvo da PTH. Estamos conscientes que de que o facto de termos uma percentagem tão elevada de doença óssea adinâmica nas nossas populações de hemodialisados, bem como a demonstração de que alguns doentes com valores de PTH intacta (2ª geração) de cerca de 600 pg/ml tinham doença óssea adinâmica, condicionaram os novos objetivos KDIGO para a PTH. Os nossos resultados suportam, em nossa opinião, a adequação e vantagem da utilização dos critérios da KDIGO em vez dos KDOQI. Tendo em conta que os primeiros definem objetivos para a PTH entre 2 e 9 vezes o limite superior do normal e não se comprometem com valores alvo absolutos e rígidos (definidos previamente nos KDOQI entre 150 e 300 pg/mL), esta nova abordagem parece-nos mais correta.Na nossa investigação clínica, caracterizámos ainda a população hemodialisada portuguesa no que respeita aos níveis séricos de calcidiol, identificando a população com suficiência, insuficiência ou deficiência em vitamina D3. Documentámos uma acentuada prevalência de insuficiência e mesmo de deficiência nesta vitamina, numa vasta população de hemodialisados, a qual, muito provavelmente, reflete de forma fidedigna, o que se pode observar na restante população de doentes portugueses IRC em estádio 5d (em diálise). Descrevemos, pela primeira vez em doentes hemodialisados, uma associação entre deficiência em calcidiol e a presença de fatores de risco cardiovascular (que têm sido identificados nos doentes urémicos). A nossa investigação conduziu-nos a resultados originais, ao identificar os níveis baixos de 25(OH)vitamina D3 como um provável fator de risco cardiovascular em hemodialisados, visto que a deficiência nesta vitamina se associou, de forma muito significativa, ao aumento da prevalência de calcificações vasculares, a inflamação, a pressão de pulso mais elevada, a hipertrofia ventricular esquerda, a insuficiência cardíaca e a níveis séricos aumentados de “BNP-Brain natriuretic peptide”. Finalmente, numa avaliação prospetiva, de intervenção terapêutica, corrigimos a insuficiência ou deficiência em 25(OH)vitamina D3 e demonstrámos que essa correção se associou a uma redução dos fatores de risco cardiovascular. Esta última intervenção foi totalmente inovadora, visto ser a primeira avaliação prospetiva da evolução dos fatores de risco cardiovasculares, em função da suplementação com vitamina D nativa, em doentes hemodialisados. Em resumo, pensamos que os resultados das nossas investigações, acima sumarizadas e apresentadas ao longo dos diversos capítulos desta dissertação,contribuiram para uma nova perspetiva da osteodistrofia renal e para recolocar o foco da atenção dos nefrologistas no tecido ósseo e no eixo paratormona – vitamina D – remodelação óssea. Este eixo surje claramente envolvido em múltiplos processos fisiopatológicos, que suportam a elevada morbilidade e mortalidade (nomeadamente de causa cardiovascular) observada nos doentes urémicos.---------ABSTRACT: The results of our research, presented throughout this thesis, contributed towards the optimisation of the invasive and non-invasive diagnosis of renal osteodystrophy. They have also highlighted the importance, to the clinical and histological expression of the ODR, of some specific characteristics of the haemodialysis population, including: the use of biocompatible high permeability haemodialysis membranes, the use of haemodiafiltration techniques with convection enhancement, as well as the limitations of biochemical markers of bone turnover or native vitamin D insufficiency/deficiency (along with the supplementation results of this vitamin). New bone formation and resorption markers, which were validated by comparison with the results of bone histomorphometry, have been tested for the first time on haemodialysis patients.As a whole, and in an integrated approach, our research enabled us to: - Show the decrease of the PTH/PTHrP receptor expression in cartilage growth, used on an IRC animal model, which explains, to some extent, not only the delayed growth observed in this pathology, but also the slow response to PTH. - Point out the advantages of the determination of bone isoform of alkaline phosphatase, in relation to the total alkaline phosphatase, in the differential diagnosis between low and high-bone turnover.- Use pyridinoline and deoxypyridinoline in the diagnosis of bone resorption for the first time on haemodialysis patients. This was the first specific serum market of the osteoclastic activity, which was successfully used on anuric patients undergoing haemodialysis treatment. We also observed an excellent correlation of these biochemical markers with the osteoclastic surface and the number of osteoclasts/mm2. - Demonstrate the sharp limitations of other markers of bone formation and resorption (namely osteocalcin, carboxyterminal propeptide of type I-PICP procollagen and telopeptide of type I-ICTP collagen) based on correlations between these markers’ serum or plasma assays and bone biopsy with histomorphometric assessment.-Show the limitations induced by aluminium overload in the interpretation of serum levels of bone remodelling non-invasive markers.-Test the efficacy and the safety of the use of deferoxamine “microdoses” for treatment of aluminium overload among patients with high levels of serum aluminium. - Demonstrate that patients with chronic haemodialysis dialysers of polyacrylonitrile (high permeability membranes) show a lower osteoblastic and osteoclastic activation than those undergoing dialysis with cuprofan membranes (low permeability), being the iPTH levels similar in both groups of patients. These findings point towards a lower activation of bone remodelling when using more biocompatible dialysis membranes and/or of higher permeability, which may relate to the ultrafiltration of cell activation mediators or to the lower activation of the stimulating mechanisms of bone remodelling, regarding the membranes. Beta-2-microglobulin (2-M) and some cytokines that play a role/participate in bone remodelling are among the bone remodelling mediators, which we demonstrated to be relevant and to be increased in the serum of haemodialysis with low flow membranes. We also proved that there is a positive correlation of serum 2-M levels not only with serum osteocalcin levels, of the bone isoenzyme of alkaline phosphatase (bone forming markers), but also with levels of serum pyridinoline (bone resorption marker).Serum 2-M levels correlate negatively with the volume of osteoid (uncalcified bone matrix). We also demonstrated the presence of elevated serum levels of interleukin-1,interleukin-1 receptor antagonist, interleukin-6 and soluble interleukin-6 receptor in haemodialysis patients. We stress the inverse relationship which we observed on one hand between the interleukin-1 receptor antagonist levels and the osteoblastic surface and on the other between the ratio of interleukin-6 receptor / interleukin-6 (IL6-r/IL6) and the osteoblastic surface. According to these unique findings, we believe that the interference in the circulating levels and in the local activation of these mediators may partly explain the rising prevalence of adynamic bone disease. A high prevalence of adynamic disease has also been observed in a haemodialysis population (>50% of patients) with no previous exposure to aluminium. The patients were treated according to K/DOQI guidelines and maintained controlled serum calcium and phosphorus levels over one year. As a result, the patients who received optimised treatment showed a surprisingly high prevalence of adynamic disease. Our results, which were ranked with the highest degree of evidence by KDIGO experts, contributed to the great difference regarding the target values of PTH in the K/DOQI (2003) and KDIGO (2009) guidelines. We are aware that the finding of such a high percentage of adynamic bone disease in our haemodialysis population, as well as the evidence that some patients with intact PTH values (2nd generation) of 600 pg/ml suffered from adynamic bone disease, have hindered, the new KDIGO objectives to PTH.In our opinion, our results support the suitability and the advantage of using KDIGO criteria instead of KDOQI. This seems to be the right approach when taking into consideration that KDIGO sets objectives to PTH between 2 and 9 times the normal upper limit and does not compromise with the rigid and absolute target values (between 150 and 300 pg/mL) previously defined by KDOQI. In our clinical research, the Portuguese haemodialysis population was characterised in terms of serum clacidiol levels and identified as having vitamin D3 sufficiency, insufficiency or deficiency. It was also recorded the prevalence of severe vitamin D3 insufficiency and even deficiency in a large haemodialysis population, which most likely provides a reliable picture of the rest of the population in IRC Portuguese patients with 5d stage (undergoing dialysis). We described for the first time in aemosialysis patients an association between calcidiol deficiency and the presence of ardiovascular risk factors, (which have been identified on uraemic patients).Our research led us to unique findings by having identified the low levels of 25(OH) vitamin D3 as a likely cardiovascular risk factor in patients undergoing haemodialysis treatment, given that deficiency in this vitamin has been significantly associated not only with a rise in the prevalence of vascular calcifications, but also inflammation, left ventricular hypertrophy, high pulse pressure and high serum BNPBrain natriuretic peptide levels. Finally, based on a prospective assessment of therapeutic intervention, 25(OH)vitamin D3 insufficiency or deficiency was corrected and we were able to demonstrate that this same correction was associated with a reduction in cardiovascular risk factors. This was a forward-looking intervention regarding the supplementation of native vitamin D in haemodialysis patients, since it was the first prospective assessment of the evolution of cardiovascular risk factors. In short, the results of our research, summarised above and presented throughout the various chapters of this thesis, contributed towards a new perspective of the renal osteodystrophy and also to draw the nephrologists’ attention to the bone tissue and to the axis PTH – vitamin D – bone remodelling. This axis appears clearly involved in multiple physiopathological processes, which support the high morbidity and mortality rate, (particularly of cardiovascular causes), observed in uraemic patients.

Development of mixed matrix membranes with metal - organic framework and ionic liquids for biogas upgrading

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Design and characterization of Chitin- Glucan polymeric structures for wound dressing materials

The main objective of this work was the development of polymeric structures, gel and films, generated from the dissolution of the Chitin-Glucan Complex (CGC) in biocompatible ionic liquids for biomedical applications. Similar as chitin, CGC is only soluble in some special solvents which are toxic and corrosive. Due to this fact and the urgent development of biomedical applications, the need to use biocompatible ionic liquids to dissolve the CGC is indispensable. For the dissolution of CGC, the biocompatible ionic liquid used was Choline acetate. Two different CGC’s, KiOnutrime from KitoZyme and biologically produced CGC from Faculdade de Ciencias e Tecnologia (FCT) - Universidade Nova de Lisboa, were characterized in order to develop biocompatible wound dressing materials. The similar result is shown in term of the ratio of chitin:glucan, which is 1:1.72 for CGC-FCT and 1:1.69 for CGC-Commercial. For the analysis of metal element content, water and inorganic salts content and protein content, both polymers showed some discrepancies, where the content in CGC-FCT is always higher compared to the commercial one. The different characterization results between CGC-FCT and CGC-Commercial could be addressed to differences in the purification method, and the difference of its original strain yeast, whereas CGC-FCT is derived from P.pastoris and the commercial CGC is from A.niger. This work also investigated the effect of biopolymers, temperature dissolution, non-solvent composition on the characteristics of generated polymeric structure with biocompatible ionic liquid. The films were prepared by casting a polymer mixture, immersion in a non-solvent, followed by drying at ambient temperature. Three different non-solvents were tested in phase inversion method, i.e. water, methanol, and glycerol. The results indicate that the composition of non-solvent in the coagulation bath has great influence in generated polymeric structure. Water was found to be the best coagulant for producing a CGC polymeric film structure. The characterizations that have been done include the analysis of viscosity and viscoelasticity measurement, as well as sugar composition in the membrane and total sugar that was released during the phase inversion method. The rheology test showed that both polymer mixtures exhibit a non- Newtonian shear thinning behaviour. Where the viscosity and viscoelasticity test reveal that CGCFCT mixture has a typical behaviour of a viscous solution with entangled polymer chains and CGCCommercial mixture has true gel behaviour. The experimental results show us that the generated CGC solution from choline acetate could be used to develop both polymeric film structure and gel. The generated structures are thermally stable at 100° C, and are hydrophilic. The produced films have dense structure and mechanical stabilities against puncture up to 60 kPa.

Determinants of mother-baby relationship evaluated during pregnancy

ABSTRACT Background Mental health promotion is supported by a strong body of knowledge and is a matter of public health with the potential of a large impact on society. Mental health promotion programs should be implemented as soon as possible in life, preferably starting during pregnancy. Programs should focus on malleable determinants, introducing strategies to reduce risk factors or their impact on mother and child, and also on strengthening protective factors to increase resilience. The ambition of early detecting risk situations requires the development and use of tools to assess risk, and the creation of a responsive network of services based in primary health care, especially maternal consultation during pregnancy and the first months of the born child. The number of risk factors and the way they interact and are buffered by protective factors are relevant for the final impact. Maternal-fetal attachment (MFA) is not yet a totally understood and well operationalized concept. Methodological problems limit the comparison of data as many studies used small size samples, had an exploratory character or used different selection criteria and different measures. There is still a lack of studies in high risk populations evaluating the consequences of a weak MFA. Instead, the available studies are not very conclusive, but suggest that social support, anxiety and depression, self-esteem and self-control and sense of coherence are correlated with MFA. MFA is also correlated with health practices during pregnancy, that influence pregnancy and baby outcomes. MFA seems a relevant concept for the future mother baby interaction, but more studies are needed to clarify the concept and its operationalization. Attachment is a strong scientific concept with multiple implications for future child development, personality and relationship with others. Secure attachment is considered an essential basis of good mental health, and promoting mother-baby interaction offers an excellent opportunity to intervention programmes targeted at enhancing mental health and well-being. Understanding the process of attachment and intervening to improve attachment requires a comprehension of more proximal factors, but also a broader approach that assesses the impact of more distal social conditions on attachment and how this social impact is mediated by family functioning and mother-baby interaction. Finally, it is essential to understand how this knowledge could be translated in effective mental health promoting interventions and measures that could reach large populations of pregnant mothers and families. Strengthening emotional availability (EA) seems to be a relevant approach to improve the mother-baby relationship. In this review we have offered evidence suggesting a range of determinants of mother-infant relationship, including age, marital relationship, social disadvantages, migration, parental psychiatric disorders and the situations of abuse or neglect. Based on this theoretical background we constructed a theoretical model that included proximal and distal factors, risk and protective factors, including variables related to the mother, the father, their social support and mother baby interaction from early pregnancy until six months after birth. We selected the Antenatal Psychosocial Health Assessment (ALPHA) for use as an instrument to detect psychosocial risk during pregnancy. Method Ninety two pregnant women were recruited from the Maternal Health Consultation in Primary Health Care (PHC) at Amadora. They had three moments of assessment: at T1 (until 12 weeks of pregnancy) they filed out a questionnaire that included socio-demographic data, ALPHA, Edinburgh post-natal Depression Scale (EDPS), General Health Questionnaire (GHQ) and Sense of Coherence (SOC); at T2 (after the 20th weeks of pregnancy) they answered EDPS, SOC and MFA Scale (MFAS), and finally at T3 (6 months after birth), they repeated EDPS and SOC, and their interaction with their babies was videotaped and later evaluated using EA Scales. A statistical analysis has been done using descriptive statistics, correlation analysis, univariate logistic regression and multiple linear regression. Results The study has increased our knowledge on this particular population living in a multicultural, suburb community. It allow us to identify specific groups with a higher level of psychosocial risk, such as single or divorced women, young couples, mothers with a low level of education and those who are depressed or have a low SOC. The hypothesis that psychosocial risk is directly correlated with MFAS and that MFA is directly correlated with EA was not confirmed, neither the correlation between prenatal psychosocial risk and mother-baby EA. The study identified depression as a relevant risk factor in pregnancy and its higher prevalence in single or divorced women, immigrants and in those who have a higher global psychosocial risk. Depressed women have a poor MFA, and a lower structuring capacity and a higher hostility to their babies. In average, depression seems to reduce among pregnant women in the second part of their pregnancy. The children of immigrant mothers show a lower level of responsiveness to their mothers what could be transmitted through depression, as immigrant mothers have a higher risk of depression in the beginning of pregnancy and six months after birth. Young mothers have a low MFA and are more intrusive. Women who have a higher level of education are more sensitive and their babies showed to be more responsive. Women who are or have been submitted to abuse were found to have a higher level of MFA but their babies are less responsive to them. The study highlights the relevance of SOC as a potential protective factor while it is strongly and negatively related with a wide range of risk factors and mental health outcomes especially depression before, during and after pregnancy. Conclusions ALPHA proved to be a valid, feasible and reliable instrument to Primary Health Care (PHC) that can be used as a total sum score. We could not prove the association between psychosocial risk factors and MFA, neither between MFA and EA, or between psychosocial risk and EA. Depression and SOC seems to have a clear and opposite relevance on this process. Pregnancy can be considered as a maturational process and an opportunity to change, where adaptation processes occur, buffering risk, decreasing depression and increasing SOC. Further research is necessary to better understand interactions between variables and also to clarify a better operationalization of MFA. We recommend the use of ALPHA, SOC and EDPS in early pregnancy as a way of identifying more vulnerable women that will require additional interventions and support in order to decrease risk. At political level we recommend the reinforcement of Immigrant integration and the increment of education in women. We recommend more focus in health care and public health in mental health condition and psychosocial risk of specific groups at high risk. In PHC special attention should be paid to pregnant women who are single or divorced, very young, low educated and to immigrant mothers. This study provides the basis for an intervention programme for this population, that aims to reduce broad spectrum risk factors and to promote Mental Health in women who become pregnant. Health and mental health policies should facilitate the implementation of the suggested measures.

Engineering of metal oxide nanoparticles for application in electrochemical devices

The growing demand for materials and devices with new functionalities led to the increased inter-est in the field of nanomaterials and nanotechnologies. Nanoparticles, not only present a reduced size as well as high reactivity, which allows the development of electronic and electrochemical devices with exclusive properties, when compared with thin films. This dissertation aims to explore the development of several nanostructured metal oxides by sol-vothermal synthesis and its application in different electrochemical devices. Within this broad theme, this study has a specific number of objectives: a) research of the influence of the synthesis parameters to the structure and morphology of the nanoparticles; b) improvement of the perfor-mance of the electrochromic devices with the application of the nanoparticles as electrode; c) application of the nanoparticles as probes to sensing devices; and d) production of solution-pro-cessed transistors with a nanostructured metal oxide semiconductor. Regarding the results, several conclusions can be exposed. Solvothermal synthesis shows to be a very versatile method to control the growth and morphology of the nanoparticles. The electrochromic device performance is influenced by the different structures and morphologies of WO3 nanoparticles, mainly due to the surface area and conductivity of the materials. The dep-osition of the electrochromic layer by inkjet printing allows the patterning of the electrodes without wasting material and without any additional steps. Nanostructured WO3 probes were produced by electrodeposition and drop casting and applied as pH sensor and biosensor, respectively. The good performance and sensitivity of the devices is explained by the high number of electrochemical reactions occurring at the surface of the na-noparticles. GIZO nanoparticles were deposited by spin coating and used in electrolyte-gated transistors, which promotes a good interface between the semiconductor and the dielectric. The produced transistors work at low potential and with improved ON-OFF current ratio, up to 6 orders of mag-nitude. To summarize, the low temperatures used in the production of the devices are compatible with flexible substrates and additionally, the low cost of the techniques involved can be adapted for disposable devices.