The national physics and chemistry exams and the learning of sciences

Dissertação apresentada para obtenção do Grau de Doutor em Ciências da Educação, pela Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Measurement of lead concentration in biological tissues by atomic spectroscopy techniques

Dissertation for the degree of Doctor of Philosophy in Physics

Evaluation of Spatial interpolation techniques for mapping climate variables with low sample density: a case study using a new gridded dataset of Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Monitoring chlorophyll-a with remote sensing techniques in the Tagus Estuary

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Gestão e Sistemas Ambientais

Component-based software engineering: a quantitative approach

Dissertação apresentada para a obtenção do Grau de Doutor em Informática pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Economies of scale and scope in the provision of diagnostic techniques and therapeutic services in Portuguese hospitals

This paper analyses the provision of auxiliary clinical services that are typically carried out within the hospital. We estimate a exible cost function for the three most important (cost- wise) diagnostic techniques and therapeutic services in Portuguese hospitals: Clinical Pathology, Medical Imaging and Physical Medicine and Rehabilitation. Our objective in carrying out this estimation is the evaluation of economies of scale and scope in the provision of these services. For all services, we nd evidence of ray economies of scale and some evidence of economies of scope. These results have important policy implications and can be related to the ongoing discussion of where and how should hospitals provide these services.

Novel techniques for the design and practical realization of switched-capacitor circuits in deep-submicron CMOS technologies

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Wetland Habitat Studies using various Classification Techniques on Multi-Spectral Landsat Imagery: Case study: Tram chim National Park, Dong Thap Vietnam

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

Framework for a business interoperability quotient measurement model

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova da Lisboa para obtenção do grau de Mestre em Engenharia e Gestão Industrial (MEGI)

Le retable majeur de la Sé velha de Coimbra et la polychromie dans le diocèse de Coimbra à l’époque baroque: aspects techniques et esthétiques

Doutoramento em Conservação e Restauro, especialidade Teoria, História e Técnicas

POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

Reliable flow simulation software is inevitable to determine an optimal injection strategy in Liquid Composite Molding processes. Several methodologies can be implemented into standard software in order to reduce CPU time. Post-processing techniques might be one of them. Post-processing a finite element solution is a well-known procedure, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Post-processing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. In previous works influence of smoothness of non-homogeneous Dirichlet condition, imposed on smooth front was examined. However, usually quite a non-smooth boundary is obtained at each time step of the infiltration process due to discretization. Then direct application of post-processing techniques does not improve final results as expected. The new contribution of this paper lies in improvement of the standard methodology. Improved results clearly show that the recalculated flow front is closer to the ”exact” one, is smoother that the previous one and it improves local disturbances of the “exact” solution.

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing a finite element solution is a well-known technique, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Postprocessing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. Consequently such an approach can be exceptionally good in modelling of resin infiltration under quasi steady-state assumption by remeshing techniques and with explicit time integration, because only the free-front normal velocities are necessary to advance the resin front to the next position. The new contribution is the post-processing analysis and implementation of the freeboundary velocities of mesolevel infiltration analysis. Such implementation ensures better accuracy on even coarser meshes, which in consequence reduces the computational time also by the possibility of employing larger time steps.

Advanced image processing techniques for detection and quantification of drusen

Dissertation presented to obtain the degree of Doctor of Philosophy in Electrical Engineering, speciality on Perceptional Systems, by the Universidade Nova de Lisboa, Faculty of Sciences and Technology

Estabilização dinâmica em patologia degenerativa da coluna lombar: estado da arte e contributo pessoal

Resumo Este trabalho encontra-se dividido em três capítulos distintos. No primeiro, é caracterizada a doença degenerativa lombar, demorando-se o autor na descrição pormenorizada das alterações anatómicas, biomecânicas, e bioquímicas inerentes à sua ocorrência. Segue-se a descrição da evolução das diferentes formas de terapêutica, enumerando as que de forma clássica mais frequentemente são utilizadas (cirúrgicas e não cirúrgicas). No segundo capítulo, são referidos os mais recentes avanços tecnológicos nesta área, mencionando, nas suas vertentes biomecânicas, clínicas e terapêuticas, as particularidades das estabilizações dinâmicas interespinhosas e pediculares, bem como da artroplastia de disco. Após esta longa introdução, inicia-se o terceiro capítulo no qual se apresenta um estudo prospectivo da avaliação clínica, funcional, imagiológica e da variação da densidade mineral óssea vertebral em 20 doentes com patologia degenerativa, tratados com sistemas de estabilização dinâmica semi-rígida interespinhosa, e seguidos durante dois anos. Do estudo realizado conclui-se que os sistemas referidos são eficazes clínica e funcionalmente no tratamento de doentes com doença degenerativa lombar. Mais ainda, estes instrumentais proporcionam um aumento da altura do disco confirmado na incidência radiográfica de perfil no nível instrumentado. Constatámos ainda que a densidade mineral óssea vertebral dos doentes intervencionados, avaliada com sistema DXA, não demonstra diferenças com significância estatística ao longo do tempo, omparativamente à determinada em idêntica população mas sem qualquer patologia lombar. Acresce que se obteve uma correlação entre a funcionalidade física e a BMD radial, com significância estatística crescente nas duas medições realizadas. Abstract This study is divided in three different chapters. In the first one the author describes the anatomical, biomechanical and biochemical changes that go along with degenerative lumbar spine disease. The therapeutically possibilities are mentioned, mainly with the classic fusion and decompression as well as the non surgical options. Then, in the second chapter, the author describes, from the biomechanical, clinical and therapeutically point of view, the new techniques of dynamic stabilization, interspinous and pedicular systems, as well as disc replacement. After this introduction, in the third chapter a prospective clinical, functional, imagiologic and vertebral bone mineral density variation study is presented. Twenty patients with degenerative lumbar spine disease are selected, and operated with a semi rigid interspinous system device, and followed for a two year period. The author concludes that the interspinous semi rigid systems were clinically and functionally effective in lumbar degenerative patients. It was also founded that the disc height at the implant segment level increased after surgery. Bone density was assessed with a DXA system device. As far as vertebral bone density is concerned, the author found no differences what so ever inside the group during the study, or to an identical control group without any lumbar pathology. The correlation study between the BMD and physical function showed that there was only significant statistically data in radial BMD measurement, and this happened with growing correlation from year 2006 to 2007.