Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Dielectric study of triton X100: a glass-forming liquid

Dissertação para obtenção do grau de mestre em Engenharia de Materiais

Síntese de sílicas mesoporosas contendo nanopartículas de TiO2 e adsorção de bases quinoidais

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

Desenvolvimento de membranas catalíticas poliméricas bifuncionais: aplicações à síntese da cânfora

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Polímeros electrocrómicos confinados em sistemas mesoporosos

Esta dissertação teve como principal objectivo a síntese de materiais híbridos constituídos por polímeros electrocrómicos incorporados em sílicas mesoporosas e nanotubos de carbono. Esses materiais foram utilizados na construção de dispositivos electrocrómicos que foram caracterizados por voltametria cíclica e espectroelectroquímica. Foram sintetizados os polímeros poli (3,4-(2-etilhexiloxi)-tiofeno (P1), poli (3,4-(2-etilhexiloxi)-tiofeno-co-(3,4-dimetoxi)-tiofeno (P2), poli (3,4-(etilenodioxi)-tiofeno (P3) e o polímero Poli (3-metil)-tiofeno (P4) de maneira a serem utilizados como modelo. Os polímeros foram caracterizados por 1H-RMN e/ou Infravermelho e análise elementar. Posteriormente foram impressos em eléctrodos de PET-ITO ou vidro-FTO, caracterizados e construídos dispositivos electrocrómicos de acordo com o know-how da empresa Ynvisible®. Os materiais híbridos foram sintetizados utilizando o método ship-in-a-bottle. O material híbrido H3 (PEDOT@MCM-41) foi obtido de maneira análoga ao polímero P3 (PEDOT) utilizando 10 equivalentes de catalisador após optimização. Este material híbrido foi depositado em eléctrodos de vidro-FTO, construídos dispositivos electrocrómicos e caracterizados de maneira a comparar com o polímeros previamente sintetizados. Comparando o desempenho do polímero com o seu respectivo híbrido é possível observar um aumento de eficiência de coloração do material híbrido relativamente ao dispositivo com o polímero livre. Os dispositivos do material H3, na experiência de durabilidade, mantiveram-se funcionais durante 10000 ciclos comparativamente a 2000 ciclos dos dispositivos com PEDOT. Na experiência de SEM do material híbrido H3 foi possível observar uma grande quantidade de polímero formada no exterior do material mesoporoso MCM-41. De maneira a minimizar essa quantidade de polímero foram delineadas algumas estratégias de síntese, uma delas pelo método de sublimação. Esta estratégia originou um material híbrido onde o polímero se situava maioritariamente nos poros da sílica MCM-41, mas não apresenta actividade electrocrómica. Ainda nesta dissertação, e com o objectivo de serem misturados com nanotubos de carbono foi sintetizado o polímero funcionalizado com pireno: poli ((3,4-etilenodioxi)-tiofeno-pireno-co-3,4-(2-etilhexiloxi)-tiofeno), utilizando uma proporção de 1:10 (P6.1) e na proporção 1:6 (P6.2) do monómero EDOT-Pireno em relação ao monómero (3,4-(2-etilhexiolxi)-tiofeno. Os polímeros foram caracterizados por 1H-RMN, UV-Vis e voltametria cíclica.

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Empirical models for quantification of machining damage in composite materials

Dissertação para obtenção do Grau de Doutor em Engenharia Mecânica

Influence of lime type and curing conditions on lime and lime-metakaolin mortars

Durability of Building Materials and Components (Vasco Peixoto de de Freitas, J.M.P.Q. Delgado, eds.), Building Pathology and Rehabilitation, vol. 3, VIII, 105-126. ISBN: 978-3-642-37474-6 (Print) 978-3-642-37475-3 (Online). Springer-Verlag Berlin Heidelberg. DOI: 10.1007/978-3-642-37475-3_5

Printable organic and inorganic materials for flexible electrochemical devices

Portuguese Science Foundation - project Electra PTDC/CTM/099124/2008 and the PhD grant SFRH/BD/45224. financial support: Professor E. Fortunato’s ERC 2008 Advanced Grant (INVISIBLE contract number 228144), “APPLE” FP7-NMP-2010-SME/262782-2 and “SMARTEC” FP7-ICT-2009.3.9/258203

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Hydric behavior of earth materials and the effects of their stabilization with cement or lime: study on repair mortars for historical rammed earth structures

Earthen building materials bear interesting environmental advantages and are the most appropriate to conserve historical earth constructions. To improve mechanical properties, these materials are often stabilized with cement or lime, but the impact of the stabilizers on the water transport properties, which are also critical, has been very rarely evaluated. We have tested four earth-based repair mortars applied on three distinct and representative rammed earth surfaces. Three mortars are based on earth collected from rammed earth buildings in south of Portugal and the fourth mortar is based on a commercial clayish earth. The main objective of the work was over the commercial earth mortar, applied stabilized and not stabilized on the three rammed earth surfaces to repair, to assess the influence of the stabilizers. The other three earth mortars (not stabilized) were applied on each type of rammed earth, representing the repair only made with local materials. The four unstabilized earth materials depicted nonlinear dependence on t1/2 during capillary suction. This behaviour was probably due to clay swelling. Stabilization with any of the four tested binders enabled the linear dependence of t1/2 expected from Washburn's equation, probably because the swelling did not take place in this case. However, the stabilizers also increased significantly the capillary suction and the capillary porosity of the materials. This means that, in addition to increasing the carbon footprint, stabilizers like cement and lime have functional disadvantages that discourage its use in repair mortars for raw earth construction.