Preparation and characterization of microfiltration flat polymeric membranes for biomedical applications

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

Experimental study of proton induced nuclear reactions in 6,7 Li

This work presents the results of the experimental study of proton induced nuclear reactions in lithium, namely the 7Li(p,α) 4He, 6Li(p,α) 3He and 7Li(p,p)7Li reactions. The amount of 7Li and 6Li identified as primordial and observed in very old stars of the Milky Way galactic halo strongly deviates from the predictions of primordial nucleosynthesis and stellar evolution models which depend, among other factors, on the cross sections of reactions like 7Li(p,α) 4He and 6Li(p,α) 3He. These discrepancies have triggered a large amount of research in the fields of stellar evolution, cosmology, pre-galactic evolution and low energy nuclear reactions. Focusing on nuclear reactions, this work has measured the 7Li(p,α) 4He and 6Li(p,α) 3He reactions cross sections (expressed in terms of the astrophysical S -factor) with higher accuracy, and the electron screening effects in these reactions for different environments (insulators and metallic targets). The 7Li(p,α) 4He angular distributions were also measured. These measurementstook place in two laboratory facilities, in the framework of the LUNA (Laboratory for Undergroud Nuclear Astrophysics) international collaboration, namely the Laboratorio ´ de Feixe de Ioes ˜ in ITN (Instituto Tecnologico ´ e Nuclear) Sacavem, ´ Portugal, and the Dynamitron-TandemLaboratorium in Ruhr-Universitat¨ Bochum, Germany. The ITN target chamber was modified to measure these nuclear reactions, with the design and construction of new components, the addition of one turbomolecular pump and a cold finger. The 7Li(p,α) 4He and 6Li(p,α) 3He reactions were measured concurrently with seven and four targets, respectively. These targets were produced in order to obtain adequate and stable lithium depth profiles. In metallic environments, the measured electron screening potential energies are much higher than the predictions of atomic-physics models. The Debye screening model applied to the metallic conduction electrons is able to explain these high values. It is a simple model, but also very robust. Concerning primordial nucleosynthesis and stellar evolution models, these results are very important as they show that laboratory measurements are well controlled, and the model inputs from these cross sections are therefore correct. In this work the 7Li(p,p)7Li differential cross section was also measured, which is useful to describe the 7Li(p,α) 4He entrance channel.

Promoção da saúde oral: uma experiência de prevenção de cárie num concelho rural

Resumo: A cárie dentária, um problema que tem atingido populações em grande parte do mundo, é a doença de maior prevalência da cavidade oral, gerando graves consequências económicas e sociais. Esta doença tem sido estudada ao longo do tempo em diferentes países com o emprego de diversos índices, geralmente para o estudo da sua prevalência, a avaliação de medidas preventivas e o adequado planeamento das acções e serviços de saúde oral. O objectivo deste Projecto foi determinar se a escovagem quando realizada na escola com pasta fluoretada, e supervisionada pelos professores, duas vezes por dia, seria ou não eficaz na diminuição das populações microbianas de Streptococcus mutans e Lactobacillus e na consequente diminuição da incidência de cárie dentária. Material e métodos: Foram seleccionadas todas as crianças (universo = 178), com idades compreendidas entre os 5, 6 e 7 anos, residentes no Concelho de Aljustrel e a frequentar o pré-escolar e o primeiro ciclo do ensino básico oficial. Foi realizada a escovagem bi-diária com pasta fluoretada a 500 ppm F-, na escola, segundo o método de Bass modificado, supervisionado pelos professores titulares de turma, que tiveram formação da técnica de escovagem utilizada. Durante os 3 anos de estudo foram realizadas 6 observações dentárias e recolhas salivares para contagem de Streptococcus mutans e Lactobacillus e avaliação da capacidade tampão da saliva. Resultados: O grupo de estudo no início da intervenção apresentava valores dos índices de cárie dentária mais elevados do que os do grupo de controlo (mais 0,109 no CPO-S, 0,0749 no CPO-D, 1,505 no cpo-s e 0,831 no cpo-d), porém sem diferenças de significância estatística. A análise estatística dos resultados não veio confirmar este pressuposto uma vez que o grupo de estudo apresentou um aumento percentual ligeiramente maior do índice CPO-D (12,5%) do que o grupo de controlo (11,6%). Para além deste aspecto, ao contrário do que seria de esperar, não foi possível detectar nenhuma diferença estatisticamente significativa em nenhum dos índices de cárie dentária (cpo-s, cpo-d, CPO-S e CPO-D) entre o grupo de estudo e grupo de controlo entre a 1ª e última observação.Ainda que os resultados do estudo aqui apresentado tenham ficado aquém do esperado, deveria ser efectuada a escovagem diária na escola, uma vez por dia, com pasta fluoretada a 1000 ppm F-, atendendo a que esta medida contribui para a promoção da saúde e prevenção da doença e é facilitadora da construção de estilos de vida saudáveis.-------ABSTRACT: Dental caries, a problem that has affected populations worldwide, is one of the most prevalent diseases of the oral cavity, causing severe economic and social consequences. This disease has been studied over time in different countries with the use of various indices, usually for the knowledge of its prevalence, evaluation of preventive measures and appropriate planning of actions and oral services. The aim of this study was to determine whether toothbrushing when performed in schools, with fluoride toothpaste, and supervised by teachers twice a day, was effective in reducing microbial populations of Streptococcus mutans and Lactobacillus with consequent reduction in the incidence of dental caries. Material and Methods: All children aged 5, 6, and 7 years, from Aljustrel County, attending official pre-school and first cycle of basic educatio were selected. Toothbrushing was performed twice a day with toothpaste with 500 ppm F-,in the school, according to the modified Bass method, supervised by professors in the class, who were trained in the brushing technique used. During the study period were performed 6 observations of the dental status, and were also collected saliva for the count of Streptococcus mutans and Lactobacillus, and assessment of buffering capacity of saliva. Results: The study group at the beginning of the intervention had higher values of dental caries than the control group (more than 0,109 in DMF-S, 0, 0749 in DMF, dmf-s 1,505 and 0,831 in dmf-t) although without statistical significance. The expected results were not confirmed, since the study group had a slightly higher percentage increase of the DMF-T (12,5%) than the control group (11,6%). Apart from that, contrary to what one would expect, we could not detect any statistical significant difference in any of the indices of dental caries (dmf-s, dmf-t and DMF-S, DMF-T) between the study and the control group in all study periods. Although the study results were not has expected, toothbrushing should be performed daily at school, once a day with fluoride toothpaste with 1000 ppm F-, since this measure contributes to health promotion and disease prevention and encourages healthy lifestyles.

Field-effect transistors based on Zinc oxide nanoparticles

This work reports the development of field-effect transistors (FETs), whose channel is based on zinc oxide (ZnO) nanoparticles (NPs). Using screen-printing as the primary deposition technique, different inks were developed, where the semiconducting ink is based on a ZnO NPs dispersion in ethyl cellulose (EC). These inks were used to print electrolyte-gated transistors (EGTs) in a staggered-top gate structure on glass substrates, using a lithium-based polymeric electrolyte. In another approach, FETs with a staggered-bottom gate structure on paper were developed using a sol-gel method to functionalize the paper’s surface with ZnO NPs, using zinc acetate dihydrate (ZnC4H6O4·2H2O) and sodium hydroxide (NaOH) as precursors. In this case, the paper itself was used as dielectric. The various layers of the two devices were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetric analyses (TG-DSC). Electrochemical impedance spectroscopy (EIS) was used in order to evaluate the electric double-layer (EDL) formation, in the case of the EGTs. The ZnO NPs EGTs present electrical modulation for annealing temperatures equal or superior to 300 ºC and in terms of electrical properties they showed On/Off ratios in the order of 103, saturation mobilities (μSat) of 1.49x10-1 cm2(Vs)-1 and transconductance (gm) of 10-5 S. On the other hand, the ZnO NPs FETs on paper exhibited On/Off ratios in the order of 102, μSat of 4.83x10- 3 cm2(Vs)-1and gm around 10-8 S.

Analysis and treatment of a nineteenth century portrait, study of Artsorb® and a proposal for a microclimate frame

The present work is divided in two parts: Part 1 is focused on the analysis and treatment of a 19th century portrait of Domingos Affonso, which belongs to the Ecomuseu Municipal do Seixal; and Part 2, which is entitled “The Microclimate Frame Project” is focused on the study of Artsorb® and on the planning of a microclimate frame for the painting. In Part 1, a study of the painting’s materials was performed using complementary analytical techniques and the painting’s condition was carefully evaluated. The painting exhibited signs of mould growth, and a more detailed investigation was made of this topic to understand if the fungal community was active and if it represented a real danger to the painting. A treatment was proposed, appropriate to the painting’s condition. A description of the treatment carried out, comprising the treatment options, is also present in this section. Within the study of the microclimate frame, in Part 2, the study of the potential corrosiveness of Artsorb® was a central subject. Artsorb® sheets are one of the most widely used materials for buffering relative humidity fluctuations in microclimate frames and its reported excellent performance is enhanced by its availability in lightweight sheets that can be easily placed inside microclimate frames. However, concerns have arisen regarding the presence of the corrosive salt lithium chloride in the composition of this buffer. Consequently, the present work also aimed to understand the potential risks of using Artsorb® and the possibility of avoiding exposure of lithium chloride to the artworks through the use of Tyvek®. Results from the preliminary tests seem to indicate that Artsorb® releases lithium chloride into air. This study also showed that a Tyvek® cover over Artsorb® reduces but does not eliminate evidence of chlorine contamination, and it significantly reduces the effectiveness of the buffering material. Considering that Artsorb® appears to be unsuitable due to the release of the corrosive salt, that Tyvek® was not efficient as a barrier for lithium chloride or as a permeable material to enable the proper functioning of Artsorb®, the buffering material proposed for the use in the microclimate frames is silica gel without indicator. Based on the choice of buffering material, as a result of this study, a microclimate frame is proposed.