Characterization of the abn2(yxiA) encoding a Bacillus subtilis GH43 arabinanase, Abn2, and its role in arabino-polysaccharides degradation.

Journal of Bacteriology (Junho 2008) 4272-4280

Mapping and characterization of a green biofilm inside of Vilar de Frades Church (Portugal)

Vilar de Frades church is integrated in the Vilar de Frades Monastery, located in the North part of Portugal (Barcelos). The monastery, founded in 566, suffered several architectural modifications and restoration works, the most relevant was in the XVI century. The church, in granite, has one nave and six bays,holding ten chapels with vaults of crossed ribbings. Nowadays, the chapels present a severe biological colonization characterised by an intense green biofilm, which becoming apparent in other locations inside the church. In the course of a general survey concerning the conservation state of the church, an accurate campaign was planned in order to assess the main biodeterioration agents, map biological colonization and determine the environmental conditions. Laboratory analyses were accomplished with optical microscopy and spectrofluorometry. This study presents the results of this campaign. Details on conservation or preservation works that need to be implemented are also presented.

Ankylosing spondylitis: genomic and functional characterization of candidate genes and their repercussion in clinical practice

RESUMO: Introdução: A espondilite anquilosante (EA) é uma doença inflamatória crónica caracterizada pela inflamação das articulações sacroilíacas e da coluna. A anquilose progressiva motiva uma deterioração gradual da função física e da qualidade de vida. O diagnóstico e o tratamento precoces podem contribuir para um melhor prognóstico. Neste contexto, a identificação de biomarcadores, assume-se como sendo muito útil para a prática clínica e representa hoje um grande desafio para a comunidade científica. Objetivos: Este estudo teve como objetivos: 1 - caracterizar a EA em Portugal; 2 - investigar possíveis associações entre genes, MHC e não-MHC, com a suscetibilidade e as características fenotípicas da EA; 3 - identificar genes candidatos associados a EA através da tecnologia de microarray. Material e Métodos: Foram recrutados doentes com EA, de acordo com os critérios modificados de Nova Iorque, nas consultas de Reumatologia dos diferentes hospitais participantes. Colecionaram-se dados demográficos, clínicos e radiológicos e colhidas amostras de sangue periférico. Selecionaram-se de forma aleatória, doentes HLA-B27 positivos, os quais foram tipados em termos de HLA classe I e II por PCR-rSSOP. Os haplótipos HLA estendidos foram estimados pelo algoritmo Expectation Maximization com recurso ao software Arlequin v3.11. As variantes alélicas dos genes IL23R, ERAP1 e ANKH foram estudadas através de ensaios de discriminação alélica TaqMan. A análise de associação foi realizada utilizando testes da Cochrane-Armitage e de regressão linear, tal como implementado pelo PLINK, para variáveis qualitativas e quantitativas, respetivamente. O estudo de expressão génica foi realizado por Illumina HT-12 Whole-Genome Expression BeadChips. Os genes candidatos foram validados usando qPCR-based TaqMan Low Density Arrays (TLDAs). Resultados: Foram incluídos 369 doentes (62,3% do sexo masculino, com idade média de 45,4 ± 13,2 anos, duração média da doença de 11,4 ± 10,5 anos). No momento da avaliação, 49,9% tinham doença axial, 2,4% periférica, 40,9% mista e 7,1% entesopática. A uveíte anterior aguda (33,6%) foi a manifestação extra-articular mais comum. Foram positivos para o HLA-B27, 80,3% dos doentes. Os haplótipo A*02/B*27/Cw*02/DRB1*01/DQB1*05 parece conferir suscetibilidade para a EA, e o A*02/B*27/Cw*01/DRB1*08/DQB1*04 parece conferir proteção em termos de atividade, repercussão funcional e radiológica da doença. Três variantes (2 para IL23R e 1 para ERAP1) mostraram significativa associação com a doença, confirmando a associação destes genes com a EA na população Portuguesa. O mesmo não se verificou com as variantes estudadas do ANKH. Não se verificou associação entre as variantes génicas não-MHC e as manifestações clínicas da EA. Foi identificado um perfil de expressão génica para a EA, tendo sido validados catorze genes - alguns têm um papel bem documentado em termos de inflamação, outros no metabolismo da cartilagem e do osso. Conclusões: Foi estabelecido um perfil demográfico e clínico dos doentes com EA em Portugal. A identificação de variantes génicas e de um perfil de expressão contribuem para uma melhor compreensão da sua fisiopatologia e podem ser úteis para estabelecer modelos com relevância em termos de diagnóstico, prognóstico e orientação terapêutica dos doentes. -----------ABSTRACT: Background: Ankylosing Spondylitis (AS) is a chronic inflammatory disorder characterized by inflammation in the spine and sacroiliac joints leading to progressive joint ankylosis and in progressive deterioration of physical function and quality of life. An early diagnosis and early therapy may contribute to a better prognosis. The identification of biomarkers would be helpful and represents a great challenge for the scientific community. Objectives: The present study had the following aims: 1- to characterize the pattern of AS in Portuguese patients; 2- to investigate MHC and non-MHC gene associations with susceptibility and phenotypic features of AS and; 3- to identify candidate genes associated with AS by means of whole-genome microarray. Material and Methods: AS was defined in accordance to the modified New York criteria and AS cases were recruited from hospital outcares patient clinics. Demographic and clinical data were recorded and blood samples collected. A random group of HLA-B27 positive patients and controls were selected and typed for HLA class I and II by PCR-rSSOP. The extended HLA haplotypes were estimated by Expectation Maximization Algorithm using Arlequin v3.11 software. Genotyping of IL23R, ERAP1 and ANKH allelic variants was carried out with TaqMan allelic discrimination assays. Association analysis was performed using the Cochrane-Armitage and linear regression tests as implemented in PLINK, for dichotomous and quantitative variables, respectively. Gene expression profile was carried out using Illumina HT-12 Whole-Genome Expression BeadChips and candidate genes were validated using qPCR-based TaqMan Low Density Arrays (TLDAs). Results: A total of 369 patients (62.3% male; mean age 45.4±13.2 years; mean disease duration 11.4±10.5 years), were included. Regarding clinical disease pattern, at the time of assessment, 49.9% had axial disease, 2.4% peripheral disease, 40.9% mixed disease and 7.1% isolated enthesopathic disease. Acute anterior uveitis (33.6%) was the most common extra-articular manifestation. 80.3% of AS patients were HLA-B27 positive. The haplotype A*02/B*27/Cw*02/DRB1*01/DQB1*05 seems to confer susceptibility to AS, whereas A*02/B*27/Cw*01/DRB1*08/DQB1*04 seems to provide protection in terms of disease activity, functional and radiological repercussion. Three markers (two for IL23R and one for ERAP1) showed significant single-locus disease associations. Association of these genes with AS in the Portuguese population was confirmed, whereas ANKH markers studied did not show an association with AS. No association was seen between non-MHC genes and clinical manifestations of AS. A gene expression signature for AS was established; among the fourteen validated genes, a number of them have a well-documented inflammatory role or in modulation of cartilage and bone metabolism. Conclusions: A demographic and clinical profile of patients with AS in Portugal was established. Identification of genetic variants of target genes as well as gene expression signatures could provide a better understanding of AS pathophysiology and could be useful to establish models with relevance in terms of susceptibility, prognosis, and potential therapeutic guidance.

Linear amplification with multiple nonlinear devices

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e Computadores

Biochemical and spectroscopic characterization of the membrane-bound nitrate reductase from Marinobacter hydrocarbonoclasticus 617

J Biol Inorg Chem (2008) 13:1321–1333 DOI 10.1007/s00775-008-0416-1

Study and characterization of the ZnPc:C60/MoOx interface in organic solar cells by means of photoelectron spectroscopy

Dissertation to obtain the academic degree of Master in materials engineering submitted to the Faculty of science and engineering of Universidade Nova de Lisboa

Unstabilised rammed earth: characterization of material collected from old constructions in South Portugal and comparison to normative requirements

International Journal of Architectural Heritage, 8: 185–212, 2014

Characterization of processed materials by electrical currents: development of equipment and applications

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Development of a satellite based PM10 concentration product for urban areas

Dissertação para obtenção do Grau de Doutor em Engenharia do Ambiente

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

Characterization of an OPCPA laser amplifier based on the nonlinear crystal YCOB

The work described in this thesis was performed at the Laboratory for Intense Lasers (L2I) of Instituto Superior Técnico, University of Lisbon (IST-UL). Its main contribution consists in the feasibility study of the broadband dispersive stages for an optical parametric chirped pulse amplifier based on the nonlinear crystal yttrium calcium oxi-borate (YCOB). In particular, the main goal of this work consisted in the characterization and implementation of the several optical devices involved in pulse expansion and compression of the amplified pulses to durations of the order of a few optical cycles (20 fs). This type of laser systems find application in fields such as medicine, telecommunications and machining, which require high energy, ultrashort (sub-100 fs) pulses. The main challenges consisted in the preliminary study of the performance of the broadband amplifier, which is essential for successfully handling pulses with bandwidths exceeding 100 nm when amplified from the μJ to 20 mJ per pulse. In general, the control, manipulation and characterization of optical phenomena on the scale of a few tens of fs and powers that can reach the PW level are extremely difficult and challenging due to the complexity of the phenomena of radiation-matter interaction and their nonlinearities, observed at this time scale and power level. For this purpose the main dispersive components were characterized in detail, specifically addressing the demonstration of pulse expansion and compression. The tested bandwidths are narrower than the final ones, in order to confirm the parameters of these elements and predict the performance for the broadband pulses. The work performed led to additional tasks such as a detailed characterization of laser oscillator seeding the laser chain and the detection and cancelling of additional sources of dispersion.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.