Transimpedance amplifier for early detection of breast cancer

Breast cancer is the most common type of cancer worldwide. The effectiveness of its treatment depends on early stage detection, as well as on the accuracy of its diagnosis. Recently, diagnosis techniques have been submitted to relevant breakthroughs with the upcoming of Magnetic Resonance Imaging, Ultrasound Sonograms and Positron Emission Tomography (PET) scans, among others. The work presented here is focused on studying the application of a PET system to a Positron Emission Mammography (PEM) system. A PET/PEM system works under the principle that a scintillating crystal will detect a gamma-ray pulse, originated at the cancerous cells, converting it into a correspondent visible light pulse. The latter must then be converted into an electrical current pulse by means of a Photo- -Sensitive Device (PSD). After the PSD there must be a Transimpedance Amplifier (TIA) in order to convert the current pulse into a suitable output voltage, in a time period lower than 40 ns. In this Thesis, the PSD considered is a Silicon Photo-Multiplier (SiPM). The usage of this recently developed type of PSD is impracticable with the conventional TIA topologies, as it will be proven. Therefore, the usage of the Regulated Common-Gate (RCG) topology will be studied in the design of the amplifier. There will be also presented two RCG variations, comprising a noise response improvement and differential operation of the circuit. The mentioned topology will also be tested in a Radio-Frequency front-end, showing the versatility of the RCG. A study comprising a low-voltage self-biasing feedback TIA will also be shown. The proposed circuits will be simulated with standard CMOS technology (UMC 130 nm), using a 1.2 V power supply. A power consumption of 0.34 mW with a signal-to-noise ratio of 43 dB was achieved.

A CMOS variable width short-pulse generator circuit for UWB RADAR applications

IEEE International Symposium on Circuits and Systems, pp. 2713 – 2716, Seattle, EUA

Magnetic pulse welding

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Engenharia Mecânica

Adherence to health-related behaviors: effectiveness of implementation intentions and posthypnotic suggestion in college students

Resumo: Com base no conceito de implementação de intenções (Gollwitzer, 1993, 1999) e na teoria do contexto de resposta de Kirsch & Lynn (1997), o presente trabalho testou a eficácia de uma intervenção combinada de implementação de intenções com hipnose e sugestão pós-hipnótica na promoção da adesão a uma tarefa simples (avaliação do humor) e uma tarefa difícil (actividade física). Os participantes são estudantes universitários de uma universidade na Nova Jérsia, (N=124, Estudo 1, EUA) e em Lisboa (N=323, Estudo 2, Portugal). Em ambos os estudos os participantes foram seleccionados a partir de uma amostra mais vasta baseado num escrutínio da sua sugestibilidade hipnótica avaliada por meio da Escala de Grupo de Sugestibilidade Hipnótica de Waterloo-Stanford (WSGC): Forma C. O Estudo 1 usou um desenho factorial do tipo 2x2x3 (tipo de intenção formada x hipnose x nível de sugestionabilidade) e o Estudo 2 usou um desenho factorial do tipo 2 x 2x 2 x 4 (tipo de tarefa x tipo de intenção formada x hipnose x nível de sugestionabilidade). No Estudo 1 foi pedido aos participantes que corressem todos os dias e durante três semanas durante 5 minutos, que medissem a sua pulsação antes e depois da actividade física e que mandassem um e-mail ao experimentador, fornecendo assim uma medida comportamental e uma medida de auto-relato. Aos participantes no grupo de intenções de meta foi apenas pedido que corressem todos os dias. Aos participantes no grupo de implementação de intenções foi pedido que especificasses com exactidão quando e onde iriam correr e enviar o e-mail. Para além disso, cerca de metade dos participantes foram hipnotizados e receberam uma sugestão pós-hipnótica em que lhes foi sugerido que o pensamento de correr todos os dias lhes viria à mente sem esforço no momento apropriado. A outra metade dos participantes não recebeu qualquer sugestão hipnótica. No Estudo 2 foi seguido o mesmo procedimento, mas a cerca de metade dos participantes foi atribuída uma tarefa fácil (enviar um Adherence to health-related behaviors ix SMS com a avaliação diária do seu estado de humor naquele momento) e à outra metade da amostra foi atribuída a tarefa de exercício físico atrás descrita (tarefa difícil). Os resultados do estudo 1 mostraram uma interacção significativa entre o nível de sugestionabilidade dos participantes e a sugestão pós-hipnótica (p<.01) indicando que a administração da sugestão pós-hipnótica aumentou a adesão nos participantes muito sugestionáveis, mas baixou a adesão nos participantes pouco sugestionáveis. Não se encontraram diferenças entre os grupos que formaram intenções de meta e os que formaram implementação de intenções. No Estudo 2 os resultados indicaram que os participantes aderiram significativamente mais à tarefa fácil do que à tarefa difícil (p<.001). Os resultados não revelaram diferenças significativas entre as condições implementações de intenções, hipnose e as duas estratégias combinadas, indicando que a implementação de intenções não foi eficaz no aumento da adesão às duas tarefas propostas e não beneficiou da combinação com as sugestões pós-hipnóticas. A utilização da hipnose com sugestão pós-hipnótica significativamente reduziu a adesão a ambas as tarefas. Dado que não existiam instrumentos em Português destinados a avaliar a sugestionabilidade hipnótica, traduziu-se e adaptou-se para Português Escala de Grupo de sugestibilidade hipnótica de Waterloo-Stanford (WSGC): Forma C. A amostra Portuguesa (N=625) apresentou resultados semelhantes aos encontrados nas amostras de referência em termos do formato da distribuição dos padrões da pontuação e do índice de dificuldade dos itens. Contudo, a proporção de estudantes portugueses encontrada que pontuaram na zona superior de sugestionabilidade foi significativamente inferior à proporção de participantes na mesma zona encontrada nas amostras de referência. No sentido de lançar alguma luz sobre as razões para este resultado, inquiriu-se alguns dos participantes acerca das suas atitudes face à hipnose utilizando uma versão portuguesa da Escala de Valência de Atitudes e Crenças face à Hipnose e comparou-se com a opinião de Adherence to health-related behaviors xAbstract: On the basis of Gollwitzer’s (1993, 1999) implementation intentions’ concept, and Kirsch & Lynn’s (1997) response set theory, this dissertation tested the effectiveness of a combined intervention of implementation intentions with hypnosis with posthypnotic suggestions in enhancing adherence to a simple (mood report) and a difficult (physical activity) health-related task. Participants were enrolled in a university in New Jersey (N=124, Study 1, USA) and in two universities in Lisbon (N=323, Study 2, Portugal). In both studies participants were selected from a broader sample based on their suggestibility scores using the Waterloo-Stanford Group C (WSGC) scale of hypnotic susceptibility and then randomly assigned to the experimental groups. Study 1 used a 2x2x3 factorial design (instruction x hypnosis x level of suggestibility) and Study 2 used a 2 x 2x 2 x 4 factorial design (task x instructions x hypnosis x level of suggestibility). In Study 1 participants were asked to run in place for 5 minutes each day for a three-week period, to take their pulse rate before and after the activity, and to send a daily email report to the experimenter, thus providing both a self-report and a behavioral measure of adherence. Participants in the goal intention condition were simply asked to run in place and send the e-mail once a day. Those in the implementation intention condition were further asked to specify the exact place and time they would perform the physical activity and send the e-mail. In addition, half of the participants were given a post-hypnotic suggestion indicating that the thought of running in place would come to mind without effort at the appropriate moment. The other half did not receive a posthypnotic suggestion. Study 2 followed the same procedure, but additionally half of the participants were instructed to send a mood report by SMS (easy task) and half were assigned to the physical activity task described above (difficult task). Adherence to health-related behaviors vii Study 1 result’s showed a significant interaction between participant’s suggestibility level and posthypnotic suggestion (p<.01) indicating that posthypnotic suggestion enhanced adherence among highly suggestible participants, but lowered it among low suggestible individuals. No differences between the goal intention and the implementation intentions groups were found. In Study 2, participants adhered significantly more (p<.001) to the easy task than to the difficult task. Results did not revealed significant differences between the implementation intentions, hypnosis and the two conditions combined, indicating that implementation intentions was not enhanced by hypnosis with posthypnotic suggestion, neither was effective as single intervention in enhancing adherence to any of the tasks. Hypnosis with posthypnotic suggestion alone significantly reduced adherence to both tasks in comparison with participants that did not receive hypnosis. Since there were no instruments in Portuguese language to asses hypnotic suggestibility, the Waterloo-Stanford Group C (WSGC) scale of hypnotic susceptibility was translated and adapted to Portuguese and was used in the screening of a sample of college students from Lisbon (N=625). Results showed that the Portuguese sample has distribution shapes and difficulty patterns of hypnotic suggestibility scores similar to the reference samples, with the exception of the proportion of Portuguese students scoring in the high range of hypnotic suggestibility, that was found lower than the in reference samples. In order to shed some light on the reasons for this finding participant’s attitudes toward hypnosis were inquired using a Portuguese translation and adaptation of the Escala de Valencia de Actitudes y Creencias Hacia la Hipnosis, Versión Cliente, and compared with participants with no prior hypnosis experience (N=444). Significant differences were found between the two groups with participants without hypnosis experience scoring higher in factors indicating misconceptions and negative attitudes about hypnosis.

Light controlled synthesis of nucleic acids

Dissertação apresentada para obtenção do grau de Doutor em Bioquímica - especialidade Biotecnologia, pela Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia

Effects of UV radiation exposure on DNA and DNA repair enzymes

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Green light for green energy: Growth in spite of crisis

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Transimpedance amplifier for integrated SpO2 optic sensor

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

CMOS indoor light energy harvesting system for wireless sensing applications

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

Photochemical degradation of triclosan: a comparison between different light sources

New emerging contaminants could represent a danger to the environment and Humanity with repercussions not yet known. One of the major worldwide pharmaceutical and personal care productions are antimicrobials products, triclosan, is an antimicrobial agent present in most products. Despite the high removal rate of triclosan present in wastewater treatments, triclosan levels are on the rise in the environment through disposal of wastewater effluent and use of sewage sludge in land application. Regulated in the EC/1272/2008 (annex VI, table 3.1), this compound is considered very toxic to aquatic life and it has been reported that photochemical transformation of triclosan produces dioxins. In the current work it was defined three objectives; determination of the most efficient process in triclosan degradation, recurring to photochemical degradation methods comparing different sources of light; identification of the main by-products formed during the degradation and the study of the influence of the Fenton and photo-Fenton reaction. Photochemical degradation methods such as: photocatalysis under florescent light (UV), photocatalysis under visible light (sunlight), photocatalysis under LEDs, photo-Fenton and Fenton reaction have been compared in this work. The degradation of triclosan was visualized through gas chromatography/mass spectrometry (GC/MS). In this study photo-Fenton reaction has successfully oxidized triclosan to H2O and CO2 without any by-products within 2 hours. Photocatalysis by titanium dioxide (TiO2) under LEDs was possible, having a degradation rate of 53% in an 8 hours essay. The degradation rate of the Fenton reaction, UV light and sunlight showed degradation between 90% and 95%. The results are reported to the data observed without statistic support, since this was not possible during the work period. Hydroquinone specie and 2,4-dichlorophenol by-products were identified in the first hour of photocatalysis by UV. A common compound, possibly identified has C7O4H , was present at the degradation by UV, sunlight and LEDs and was concluded to be a contaminant. In the future more studies in the use of LEDs should be undertaken given the advantages of long durability and low consumption of energy of these lamps and that due to their negative impact on the environment fluorescent lamps are being progressively made unavailable by governments, requiring new solutions to be found. Fenton and photo-Fenton reactions can also be costly processes given the expensive reagents used.

Using an LED as a sensor and visible light communication device in a smart illumination system

The need for more efficient illumination systems has led to the proliferation of Solid-State Lighting (SSL) systems, which offer optimized power consumption. SSL systems are comprised of LED devices which are intrinsically fast devices and permit very fast light modulation. This, along with the congestion of the radio frequency spectrum has paved the path for the emergence of Visible Light Communication (VLC) systems. VLC uses free space to convey information by using light modulation. Notwithstanding, as VLC systems proliferate and cost competitiveness ensues, there are two important aspects to be considered. State-of-the-art VLC implementations use power demanding PAs, and thus it is important to investigate if regular, existent Switched-Mode Power Supply (SMPS) circuits can be adapted for VLC use. A 28 W buck regulator was implemented using a off-the-shelf LED Driver integrated circuit, using both series and parallel dimming techniques. Results show that optical clock frequencies up to 500 kHz are achievable without any major modification besides adequate component sizing. The use of an LED as a sensor was investigated, in a short-range, low-data-rate perspective. Results show successful communication in an LED-to-LED configuration, with enhanced range when using LED strings as sensors. Besides, LEDs present spectral selective sensitivity, which makes them good contenders for a multi-colour LED-to-LED system, such as in the use of RGB displays and lamps. Ultimately, the present work shows evidence that LEDs can be used as a dual-purpose device, enabling not only illumination, but also bi-directional data communication.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

The effect of energy and traffic light labeling on parents purchasing decisions of cereals for their children

Objective: Nutritional labeling systems are considered a tool to fight obesity since they aim to contribute for more informed food choices as well as assist consumers to make healthier nutrition options and in this manner, contribute to a decrease in the obesity rate. This study intends to analyze the effect of different types of labeling systems on parents’ purchasing decisions for their children on a specific product: breakfast cereals. More precisely, how labels affect parents’ perception of healthiness regarding cereals and if the nutritional information has an effect on intended purchases for their children. Participants and methods: We conducted a study with 135 Portuguese parents of children aged 4 to12 years. Parents answered a questionnaire with one of three hypothetical cereals menus. Menus only differed in their nutritional labeling technique: no labels (control group), reference intake labels or traffic light labels. In addition, we conducted 20 face-to-face interviews to a different group of parents in order to perform a recall task. Findings: This paper provides no evidence to suggest that energy labeling or traffic light labeling systems alone were successful in helping parents making healthy purchases of cereals for their children. Therefore, there is the need to promote supplementary policies to encourage the consumption of healthier food and help fight obesity.