Characterization of sol-gel matrices with entrapped cutinase

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Smart windows with permanent memory effect

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Contribuição para o estudo da anexina V na apoptose celular em concentrados de eritrócitos

A hemoterapia moderna baseia-se na utilização correcta dos diversos componentes sanguíneos, associados a um maior controle de qualidade do sangue, o que a torna mais segura e, actualmente, muitos doentes sao beneficiados pois, a transfusão de componentes sanguineos, em situaçoes várias, está na linha da frente na manutenção da vida e em casos extremos, o último recurso que salva vidas. A qualidade e a segurança nas transfusões de sangue são grandes preocupações da área médica, autoridades de saúde e doente1. O sangue obtido pelos Centros de Sangue provem de dadores voluntários, dotados de uma enorme sensibilidade social, que periodicamente assumem uma postura benevola e altruista e consequentemente mantêm os bancos de sangue providos de um produto imprescindivel no tratamento de diversas patologias. O produto final disponível – concentrado de eritrócitos (CE´s), plasma e concentrado plaquetário – tem de assumir um carácter seguro e viável de modo a que os riscos para o doente sejam diminutos2. O controlo de qualidade aplicado a todo o sangue doado realiza provas de conformidade nas unidades com especificações previamente definidas, sendo a hémolise um dos parâmetros importantes na avaliação da qualidade dos concentrados de eritrócitos, pois, pode ocasionar implicações clinicas para o receptor. Para além disso a avaliação da concentração de hemoglobina (Hg) no sangue doado mostra-se um controlo imprescindivel que salvaguarda a qualidade e segurança do componente a transfundir3;4.Até se obter um CE há todo um processo moroso e de responsabilidade vital. Todo o sangue obtido passa por várias etapas fundamentais até à obtenção do componente pretendido (analise, produção e armazenamento). Os CE’s obtidos quando armazenados, num ambiente de refrigeração, têm uma vida útil de 42 dias. Após este período, o sangue deve ser inutilizado por se verificar alterações bioquímicas, biomecânicas, e imunológicas nos CE’s e por consequência a sua instabilidade vital no que ao tratamento de patologias, para as quais este componente está indicado, diz respeito5. Foi realizado um estudo experimental com o objetivo de avaliar a contribuição da Anexina V na apoptose celular nos concentrados de eritrócitos, constatando a degradação dos mesmos ao longo de todo o período de armazenamento e validar o paradigma que a ciência preconiza: “Os CE’s após os 42 dias armazenados, em condições específicas (2 a 6º centígrados), são inviaveis para transfundir”6;7. A avaliação dos níveis de apoptose por citometria de fluxo é geralmente realizada por métodos que utilizam Anexina V como marcador vital, que se associa aos resíduos de fosfatidilserina, externalizados no início do processo apoptótico. A Anexina V é uma proteína humana endógena dependente do ião Ca+2, amplamente distribuída intracelularmente em altas concentrações na placenta e em concentrações mais baixas nos eritrócitos, plaquetas e monócitos. Apresenta como principal característica a capacidade de se ligar à fosfatidilserina, um fosfolipído presente na camada interna da bicamada lipídica, que durante a apoptose celular é translocada para a camada externa da membrana celular. A determinação da Anexina V é normalmente utilizada para verificar se as células são viáveis, apoptóticas ou necróticas por meio de diferenças na integridade da membrana plasmática. Assim, ao conjugar a Anexina V ao FITC (Isotiocianato de fluoresceína) é possível identificar e quantificar as células apoptóticas por citometria de fluxo7. Numa amostra de 15 CE’s, a qual foi induzida a hemólise, verificou-se, por citometria de fluxo, que a viabilidade deste componente se desvanesce ao longo do tempo, confirmando assim que o tratamento, manuseamento e armazenamento do sangue compromete a vitalidade terapeutica deste insubstituivel produto vital.

Storage of water molecules into biomimetic heterostructures: the role of roughness

The development of devices based on heterostructured thin films of biomolecules conveys a huge contribution on biomedical field. However, to achieve high efficiency of these devices, the storage of water molecules into these heterostructures, in order to maintain the biological molecules hydrated, is mandatory. Such hydrated environment may be achieved with lipids molecules which have the ability to rearrange spontaneously into vesicles creating a stable barrier between two aqueous compartments. Yet it is necessary to find conditions that lead to the immobilization of whole vesicles on the heterostructures. In this work, the conditions that govern the deposition of open and closed liposomes of 1.2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (sodium Salt) (DPPG) onto polyelectrolytes cushions prepared by the layer-by-layer (LbL) method were analyzed. Electronic transitions of DPPG molecules as well as absorption coefficients were obtained by vacuum ultraviolet spectroscopy, while the elemental composition of the heterostructures was characterized by x-ray photoelectron spectroscopy (XPS). The presence of water molecules in the films was inferred by XPS and infrared spectroscopy. Quartz crystal microbalance (QCM) data analysis allowed to conclude that, in certain cases, the DPPG adsorbed amount is dependent of the bilayers number already adsorbed. Moreover, the adsorption kinetics curves of both adsorbed amount and surface roughness allowed to determine the kinetics parameters that are related with adsorption processes namely, electrostatic forces, liposomes diffusion and lipids re-organization on surface. Scaling exponents attained from atomic force microscopy images statistical analysis demonstrate that DPPG vesicles adsorption mechanism is ruled by the diffusion Villain model confirming that adsorption is governed by electrostatic forces. The power spectral density treatment enabled a thorough description of the accessible surface of the samples as well as of its inner structural properties. These outcomes proved that surface roughness influences the adsorption of DPPG liposomes onto surfaces covered by a polyelectrolyte layer. Thus, low roughness was shown to induce liposome rupture creating a lipid bilayer while high roughness allows the adsorption of whole liposomes. In addition, the fraction of open liposomes calculated from the normalized maximum adsorbed amounts decreases with the cushion roughness increase, allowing us to conclude that the surface roughness is a crucial variable that governs the adsorption of open or whole liposomes. This conclusion is fundamental for the development of well-designed sensors based on functional biomolecules incorporated in liposomes. Indeed, LbL films composed of polyelectrolytes and liposomes with and without melanin encapsulated were successfully applied to sensors of olive oil.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

An agent-based evolutionary approach for manufacturing system layout design

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

New strategies to detect and understand genotype-by-environment interactions and QTL-by-environment interactions

Dissertação para obtenção do Grau de Doutor em Estatística e Gestão do Risco, especialidade em Estatística

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Information flow analysis using data-dependent logical propositions

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Dependence of IVIM-DWI estimations on acquisition parameters

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Target-specific multiphysics modeling for thermal medicine applications

Dissertation to obtain the degree of Doctor of Philosophy in Biomedical Engineering

Rastreio combinado do 1º trimestre e doenças autoimunes : Impacto das variaveis pré-analíticas na avaliação do risco

RESUMO: Contexto: As anomalias congénitas, com particular destaque para as neuploidias , afectam aproximadamente 2% dos recém-nascidos, constituindo causas frequentes de morbilidade e mortalidade. Actualmente, a avaliação do grau de risco para as aneuploidias mais prevalentes (T21, T13, T18) é efectuada através do “Rastreio Combinado do 1º Trimestre”, devendo as grávidas com risco acrescido ser sujeitas a exames invasivos (ex.biópsia das vilosidades coriónicas,amniocentese). Quanto mais qualidade existir num rastreio, menos falsos positivos existirão e menor o número de exames diagnósticos invasivos desnecessários. As doenças autoimunes são doenças inflamatórias crónicas em cuja fisiopatologia se encontram distúrbios da imunidade humoral e celular, dependentes de factores genéticos, hormonais,psicológicos e ambientais. Atingem mais o sexo feminino e durante a idade fértil,podendo influenciar o outcome da gravidez e a saúde neonatal causando significativa morbilidade e mortalidade. O lúpus eritematoso sistémico para além de potencialmente afectado pelas alterações imunoendócrinas fisiológicas da gravidez, associa-se frequentemente a problemas de fertilidade. Recentemente, foi sugerido que as anormalidades ocorridas durante a invasão precoce do sinciciotrofoblasto, resultando em deficiente diferenciação, deficiente maturação e diminuição na produção de hCG, poderão ser o mecanismo fisiopatológico primário para as perdas fetais no primeiro trimestre, nos doentes com SLE. A ocorrência de níveis elevados de hCG total e ß-hCG livre no rastreio para despiste de síndrome de Down do segundo e do primeiro trimestre foi assinalada em grávidas portadoras de lúpus, mas a escassez de estudos comprovativos e a pequena dimensão das amostras estudadas constituiu uma limitação significativa na fidedignidade dos resultados obtidos. Objectivos: O estudo teve como objectivos i. estabelecer valores normativos Portugueses e de distribuição para as MoM’s dos parâmetros séricos do primeiro trimestre, por semana de gestação:(PAPP-A e ß-hCG livre), ii. avaliar a influência que as doenças autoimunes têm sobre as MoM’s individuais dos parâmetros bioquímicos PAPP-A e/ou ß-hCG livre, utilizados no rastreio pré-natal combinado do 1º trimestre, e iii. saber se as doenças autoimunes podem condicionar um aumento da taxa de resultados falsos positivos, com consequente aumento do número de amniocenteses. Metodologia: Estudo longitudinal prospectivo, consistindo num rastreio pré-natal combinado de 1º trimestre para pesquisa de aneuploidias, em duas amostras provenientes do Reino Unido (n= 45,854) e de Portugal (n=3122). Foram avaliados parâmetros socio-demográficos, ecográficos, laboratoriais, e calculados os indicadores de desempenho do rastreio combinado. A execução analítica dos testes bioquímicos séricos (PAPP-A e ß-hCG livre) foi realizada no autoanalisador Brahms Kryptor e no autoanalizador 6000 Delfia Xpress. Compararam-se os grupos autoimune e não autoimune das amostras. Resultados: Relativamente às características populacionais, o grupo auto imune tinha valores significativamente superiores nas variáveis idade materna e idade gestacional. Comparando os grupos com e sem doença autoimune, constatou-se a existência de uma elevação das MoM’s da ß-hCG livre nas grávidas com doença autoimune, nomeadamente nos casos de lúpus eritematoso sistémico. Conclusões: os resultado obtidos reforçam a indicação do rastreio combinado do 1º trimestre certificado pela FMF nas grávidas com doenças autoimunes, nomeadamente para as doentes com LES; no entanto, devem ser calculados e introduzidos factores de correcção no algoritmo de risco, de modo a evitar a subida no número de resultados falso-positivos, e consequentemente a sobre- utilização de métodos invasivos.------------ ABSTRACT: Context: Congenital anomalies, with particular reference to aneuploidias, affect approximately 2% of newborns, and are frequent causes of morbidity and mortality. Currently, the risk evaluation for the most prevalent aneuploidias (T21, T13, T18) is carried out through the “combined first trimester screening”, and pregnant women with increased risk are subjected to invasive tests (e.g. villus biopsy done, amniocentesis). The more quality exists in a screening, less false positives exists and fewer unnecessary invasive diagnostic exams. Autoimmune diseases are chronic inflammatory diseases in whose pathophysiology are immune humoral and cellular disorders, dependent on genetic factors, hormonal, psychological and environmental factors. The disease is more prevalent among females, during the child-bearing age, and may influence the outcome of pregnancy and neonatal health causing significant morbidity and mortality. Lupus Erythematosus in addition to potentially affected by immunoendocrine physiological changes of pregnancy, is often associated with fertility problems. Recently, it has been suggested that the abnormalities that occurred during the early invasion of the syncytiotrophoblast, resulting in insufficient differentiation, deficient maturation and decrease in production of hCG may be the primary pathophysiological mechanism for fetal losses in the first quarter, in patients with SLE. The occurrence of elevated levels of total hCG and free ß-hCG in screening for Down’s syndrome of the second and first trimester was reported in pregnant women with lupus, but the paucity of supporting studies and the small size of the samples studied constituted a significant limitation on the trustworthiness of the results obtained. Objectives: this study aims to i. establish normative values for the serum parameters MoM’s (PAPP-A and free β-hCG) and it’s distribution, in the first trimester, by week of pregnancy; ii. assess the influence that the autoimmune diseases have on the MoM’s of individual biochemical PAPP-A and/or β-hCG, used in antenatal screening combined for the first trimester, and iii. whether the autoimmune diseases may make an increased rate of false positives, with consequent increase in the number of amniocenteses.Methodology: Prospective longitudinal study, consisting of a combined first trimester antenatal screening for aneuploidies lookup in two samples from the United Kingdom (n=45.854) and Portugal (n= 3.122). Socio-demographic, echographic and laboratory parameters were evaluated, and combined screening performance indicators were calculated. The analytical run of serum biochemical tests (PAPP-A and ß-hCG) was held at the Brahms Kryptor and in Delfia Xpress 6000. Comparisons between autoimmune group and non-autoimmune group were made. Results: Relating to population characteristics, the autoimmune group had significantly diferente values in the variables maternal age and gestational age. Comparing the groups with and without autoimmune disease, it was noted that there is an elevation of the MoM’s of free ß-hCG levels in pregnant women with autoimmune disease, particularly in cases of systemic lupus erythematosus. Conclusions: The results obtained reinforce the indication of FMF certified combined screening in pregnant women with autoimmune diseases, notably to the patients with SLE; However, correction factors should be calculated and entered in the risk algorithm, in order to avoid the rise in the number of false positive results, and consequently the over-use of invasive methods.

Landscape composition and climatic parameters significant in the spread of an invasive species (Pine wood Nematode)

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

A logical foundation for session-based concurrent computation

Linear logic has long been heralded for its potential of providing a logical basis for concurrency. While over the years many research attempts were made in this regard, a Curry-Howard correspondence between linear logic and concurrent computation was only found recently, bridging the proof theory of linear logic and session-typed process calculus. Building upon this work, we have developed a theory of intuitionistic linear logic as a logical foundation for session-based concurrent computation, exploring several concurrency related phenomena such as value-dependent session types and polymorphic sessions within our logical framework in an arguably clean and elegant way, establishing with relative ease strong typing guarantees due to the logical basis, which ensure the fundamental properties of type preservation and global progress, entailing the absence of deadlocks in communication. We develop a general purpose concurrent programming language based on the logical interpretation, combining functional programming with a concurrent, session-based process layer through the form of a contextual monad, preserving our strong typing guarantees of type preservation and deadlock-freedom in the presence of general recursion and higher-order process communication. We introduce a notion of linear logical relations for session typed concurrent processes, developing an arguably uniform technique for reasoning about sophisticated properties of session-based concurrent computation such as termination or equivalence based on our logical approach, further supporting our goal of establishing intuitionistic linear logic as a logical foundation for sessionbased concurrency.