The influence of consumption vocabulary on the encoding and retrieval of haptic information

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Haptic robot-environment interaction for self-supervised learning in ground mobility

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores

Human-Human Collaboration in Virtual Teams

Extended and networked enterprises distribute the design of products, planning of the production process, and manufacturing regionally if not globally. Employees are therefore confronted with collaborative work over remote sites. A cost effective collaboration depends highly on the organization maintaining a common understanding for this kind of work and a suitable support with information and communication technology. The usual face to face work is going to be replaced at least partly if not totally by computer mediated collaboration. Creating and maintaining virtual teams is a challenge to work conditions as well as technology. New developments on cost-effective connections are providing not only vision and auditory perception but also haptic perception. Research results for improving remote collaboration are presented. Individual, social and cultural aspects are considered as new requirements on the employees of networked and extended enterprises.

Vision based obstacle detection for all-terrain robots

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Automated illustration of multimedia stories

Submitted in part fulfillment of the requirements for the degree of Master in Computer Science

The interrogation of witnesses abroad in execution of a european investigation order: an examination from eyes of the defence

European Master Human Rights and Democratisation

Cortisol e testosterona no plasma da grávida e no líquido amniótico: variação com o relaxamento e correlação com o rácio digital 2D:4D no recém-nascido

RESUMO: Conclusão - Este estudo sugere que mulheres grávidas beneficiam da prática rotineira de 30 min de relaxamento perante a eminência de um acontecimento indutor de stress. O benefício será tanto psicológico como fisiológico e será mais marcado de manhã do que de tarde. As mulheres com maior tendência ansiosa, tipicamente as mais jovens e com menos idade gestacional, serão as que mais beneficiam. Entre os tipos de intervenção experimentados, todos eles não dispendiosos, a audição de música foi globalmente o mais eficaz para o propósito pretendido. A variação do cortisol e a variação da testosterona estão altamente correlacionadas, e este efeito poderá ser explorado em futuras intervenções relaxantes. Programas curtos de relaxamento poderão conduzir a benefícios para o bem-estar psicológico e para a saúde da grávida, com benefícios adicionais no desfecho da gravidez. O rácio digital 2D:4D do recém-nascido apresenta características sexualmente dimórficas, sendo mais baixo em rapazes que em raparigas, confirmando a influência dos androgénios pré-natais, mas há grande sobreposição entre os sexos pelo que, isoladamente, não pode ser utilizado como marcador de risco. No entanto, se associado a outros marcadores biológicos, como o peso ao nascer e a circunferência cerebral, entre outros, poderá ser um parâmetro a valorizar desde cedo, possivelmente no acompanhamento pediátrico. Nas raparigas, o RD da mãe e a testosterona no LA explicam uma proporção significativa do seu 2D:4D. Em ambos os sexos, o rácio 2D:4D aumenta após o nascimento e o dimorfismo sexual observado com base em amostras de crianças com mais de dois anos de idade, é afectado pela testosterona pós-natal, especialmente no que se refere à mão direita.----------ABSTRACT: Conclusions - This study suggests that pregnant women would benefit from the routine practice of 30min relaxation when at the imminence of a stressful event. The benefit would be both psychological and physiological and would be more pronounced in the morning than in the afternoon. Women tending to be more anxious, typically younger and at a lower gestational age, are the ones that benefit the most. Among the interventions investigated, all being non-expensive and easy to implement, listening to relaxing music was globally the most efficient for the benefit intended. The variation of cortisol and the variation of testosterone are significantly correlated, an association that might be used in future relaxation interventions. It is feasible to conceive short relaxation programs aimed at benefiting psychological well-being and health in pregnancy, with additional benefits for pregnancy outcome. The digital ratio 2D:4D is sexually dimorphic, being lower in males than in females, confirming the influence of pre-natal androgens. There is however large overlap between sexes, rendering the 2D:4D a risk marker not to be used in isolation but rather in association with other markers, like for instance the weight at birth and the head circumference, wherein it may be a relevant parameter for pediatric follow-up. In newborn females, a significant amount of variability in 2D:4D is accounted for by their mother’s digital ratio and AF testosterone. In both sexes, the 2D:4D ratio increases following birth and sexual dimorphism,as assessed from samples of subjects with more than 2 years of age, is affected by post-natal testosterone, especially in what concerns the right hand.

Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance

Construction and Building Materials 49 (2013), 315-327

Modeling and visualization of medical anesthesiology acts

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Sustainability and consumer responses: The effect of bad industry reputation and fit

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Air lime-earth blended mortars - Assessment on fresh state and workability

International Conference on Vernacular Heritage, Sustainability and Earthen Architecture, VerSus 2014, 2nd MEDITERRA, 2nd ResTAPIA, 11-13 September, Valencia, Spain

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.