Preliminary study on the production of functionally graded materials by friction stir processing

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Development and implementation of strategies for the incorporation of reinforcing elements in aluminium alloys by solid state processing

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Production of aluminium based composites reinforced with embedded NiTi by friction stir welding

Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica

Cellulose-based composites as functional conductive materials for printed electronics

In this work, cellulose-based electro and ionic conductive composites were developed for application in cellulose based printed electronics. Electroconductive inks were successfully formulated for screen-printing using carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) as conductive functional material and cellulose derivatives working as binder. The formulated inks were used to fabricate conductive flexible and disposable electrodes on paper-based substrates. Interesting results were obtained after 10 printing passes and drying at RT of the ink with 10 % wt. of pristine CFs and 3% wt. of carboxymethyl cellulose (CMC), exhibiting a resistivity of 1.03 Ωcm and a resolution of 400 μm. Also, a resistivity of 0.57 Ωcm was obtained for only one printing pass using an ink based on 0.5 % wt. MWCNTs and 3 % wt. CMC. It was also demonstrated that ionic conductive cellulose matrix hydrogel can be used in electrolyte-gated transistors (EGTs). The electrolytes revealed a double layer capacitance of 12.10 μFcm-2 and ionic conductivity of 3.56x10-7 Scm-1. EGTs with a planar configuration, using sputtered GIZO as semiconducting layer, reached an ON/OFF ratio of 3.47x105, a VON of 0.2 V and a charge carrier mobility of 2.32 cm2V-1s-1.

MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Repercussões crónicas nas vias aéreas da hiperóxia neonatal : modelo experimental

RESUMO: O objectivo deste trabalho foi avaliar se a exposição crónica neonatal à hiperóxia mo-derada induz alterações funcionais e estruturais persistentes nas vias aéreas. Desenvolveu-se um modelo animal, no rato, a partir do qual se retiraram implicações para a compreensão das repercussões crónicas da hiperóxia neonatal sobre as vias aéreas de displasia broncopulmonar (DBP), em duas fases distintas: imediatamente após a exposi-ção neonatal a 50%O2 (grupo 50%O2) e após três semanas de recuperação em ar ambiente (grupo 50%O2+Ar).Compararam-se os resultados da resposta do músculo liso de traqueia (MLT) à esti-mulação in vitro com metacolina e salbutamol e avaliaram-se as alterações quantitativas da área de MLT, bem como as alterações qualitativas da estrutura da traqueia. Demonstrou-se que a exposição a 50% de oxigénio não tinha repercussões imediatas sobre a resposta in vitro do MLT à estimulação colinérgica, mas que induzia um aumento do relaxamento em resposta ao salbutamol. A contractilidade do MLT em resposta à estimula-ção com metacolina no grupo 50%O2+Ar foi significativamente superior à do grupo de con-trolo da mesma idade e também superior à observada no grupo 50%O2, enquanto que a resposta ao salbutamol se voltou a aproximar dos valores de controlo após a recuperação em normóxia. Não se observaram diferenças estatisticamente significativas na área de MLT entre os grupos experimental e de controlo, o que se deve provavelmente ao número reduzido de amostras avaliadas e à variabilidade deste parâmetro no grupo de controlo; contudo, verifi-cou-se um aumento médio de 15% imediatamente após a exposição à hiperóxia que persis-tiu após o período de recuperação.As alterações qualitativas sobre a arquitectura da traqueia, avaliadas por microscopia óptica, revelaram no grupo 50%O2 aumentos da espessura da matriz extracelular e da den-sidade de mastócitos desgranulados na submucosa e adventícia vizinhas do MLT, sem outras alterações relativamente ao grupo de controlo com 15 dias. As alterações da matriz extrace-lular foram reversíveis após a recuperação em ar ambiente. A densidade de mastócitos per-maneceu superior à do grupo de controlo de 36 dias de idade, apresentando-se em maior contiguidade com o MLT relativamente ao grupo 50%O2. Em síntese, demonstrou-se que a hiperóxia neonatal crónica em níveis moderados in-duz alterações da resposta contráctil do MLT e da estrutura da traqueia que podem ter ex-pressão funcional após a exposição ter cessado. Assim, o contributo original do presente trabalho foi o desenvolvimento de um modelo animal que permite avaliar os mecanismos pelos quais a hiperóxia é capaz de induzir, isoladamente, alterações crónicas da contracti-lidade, do relaxamento do ML e da estrutura das vias aéreas que podem ser responsáveis pela HRB persistente em doentes sujeitos a oxigenioterapia neonatal.-------------ABSTRACT: The aim of this work was to evaluate whether chronic neonatal exposure to hyperoxia in-duces persistent structural and functional airway changes. An animal model was developed, using neonatal rats, in order to understand the chronic effects of neonatal hyperoxia on the airways, in bronchopulmonary dysplasia, in two distinct phases: immediately after neonatal exposure to 50%O2 (50%O2 group) and after three weeks of recovery at ambient air (50%O2+Ar group).The results from the tracheal smooth muscle (TSM) response to in vitro stimulation with metacholine and salbutamol were compared and quantitative changes in TSM area, as well as qualitative changes in tracheal structure were evaluated. It was demonstrated that while exposure to 50% oxygen had no immediate effects on in vitro TSM response to cholinergic stimulation, it induced an increase in relaxation as a result of salbutamol administration. TSM contractility as a result of methacholine administration in the 50%O2 + Ar group was significantly higher than that of the same-age control group, and also higher than the one observed in the 50%O2 group, whereas the response to salbutamol admini-stration was once again closer to the control values after recovery in normoxia. There were no statistically significant differences in the TSM area between the experi-mental and control groups, which is most likely due to the reduced number of samples evalu-ated and to the variability of this parameter in the control group. However, there was an aver-age increase of 15% immediately after exposure to hyperoxia, which persisted after the recov-ery period. Qualitative changes in tracheal architecture, evaluated by optic microscopy, revealed that the 50%O2 group suffered an increase in the thickness of the extracellular matrix and degranu-lated mast cell density in the submucosa and adventitia adjacent to the TSM, without further changes when compared with the control group at 15 days of age. The changes in extracellular matrix were reversible after recovery in ambient air. Mast cell density remained higher than that of the control group at 36 days of age, and more contiguous to TSM than the 50%O2 group. In conclusion, it has been demonstrated that moderate levels of chronic neonatal hyperoxia in-duce changes in TSM contractile response and tracheal structure, which may be functionally ex-pressed after discontinuation of exposure. Therefore, the original contribution of the present work was the development of an animal model which allows the evaluation of the mechanisms through which hyperoxia alone can induce chronic changes in contractility and relaxation of SM and also in airway structure that can be responsible for the persistent airway hyperrespon-siveness found in patients who were submited to neonatal oxygen therapy.

Liquid crystal mobility and PDLC memory effects

Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Degree of Master in Chemical and Biochemical Engineering

The effect of water inorganic matrix in ibuprofen adsorption onto activated carbon for water and wastewater treatment

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Spatial neighborhood matrix computation: Inverse distance weighted versus binary contiguity

Paper presented at Geo-Spatial Crossroad GI_Forum, Salzburg, Austria.

Selective synthesis under microwave irradiation of new monomers for potential applications in PDLC films

Dissertation to obtain the degree of master in Bioorganic

Development of mixed matrix membranes with metal - organic framework and ionic liquids for biogas upgrading

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

The additive effects in matrix dispersed liquid crystals

Dissertation presented at Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa to obtain the degree of Master in Chemical and Biochemical Engineering

Effect of surfactant on PDLC films with and without permanent memory effect

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Electrochemical supercapacitors of conductive polymers and their composites

Dissertação Para Obtenção Do Grau De Mestre Em Bioorgânica