20 resultados para Full-scale Physical Modelling


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A thesis submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy in Sanitary Engineering in the Faculty of Sciences and Technology of the New University of Lisbon

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Sanitária

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente,perfil Sanitária

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Doutor em Engenharia Civil

Relevância:

100.00% 100.00%

Publicador:

Resumo:

RESUMO: Vários estudos realizados sugerem que os factores psicossociais (nível de satisfação laboral; nível educacional; a catastrofização da dor e crenças de medoevitamento)têm um importante papel como factores associados ao desenvolvimento de cronicidade da DL (Krismer & van Tulder, 2007; Kwon et al., 2006; Leclerc et al., 2009; Pincus, Santos, Breen, Burton e Underwood., 2008.) Objectivo: Analisar a associação entre as variáveis catastrofização da dor, crenças de medo-evitamento da dor e intensidade da dor com a incapacidade funcional auto-reportada, numa amostra de indivíduos com DCL. Metodologia: A população alvo foi constituída por 160 funcionários da Santa Casa da Misericórdia e Centro de Bem Estar Social de Arronches. Integraram a amostra 133 funcionários que se disponibilizaram a responder aos diferentes instrumentos de avaliação utilizados (“Roland–Morris Disability Questionnaire”(RMQ); “ Questionário de Caracterização e Levantamento de Factores de Risco e Impacto associado à DCL”; “Pain Catastrophing Scale” (PCS) e o “Fear- Avoidance Beliefs Questionnaire” (FABQ). A recolha de dados realizou-se entre Agosto e Novembro de 2010. Resultados: Neste estudo, verificou-se que 39,1 % dos indivíduos referiam DCL não específica. Relativamente à incapacidade funcional autoreportada, obteve-se um score médio 5,87 no RMQ. Obteve-se um valor de rs=0,425,p<0,01, para a associação entre a catastrofização da dor e incapacidade. Relativamente à associação entre crenças de medo-evitamento, sub-escala actividade física e incapacidade, foi obtido o valor de rs= 0,074 e para a associação entre as crenças de medo-evitamento, sub-escala trabalho e incapacidade, verificou-se rs=0,422, p<0,01. No que respeita à associação entre percepção da intensidade dor actual e a incapacidade, obteve-se um valor rs= 0,177 e a associação entre a dor percepcionada em 2009 e incapacidade, aferiu um resultado de rs=0,291, p<0,05. Conclusão: Concluímos que existe uma associação moderada entre catastrofização da dor e a incapacidade funcional auto-reportada, e também entre crenças de medo-evitamento relativamente ao trabalho e a incapacidade funcional auto-reportada. Relativamente à associação entre a dor percepcionada em 2009 e a incapacidade funcional auto-reportada a associação é baixa. Não sendo encontrada associação entre crenças de medo-evitamento relativamente à actividade física e a incapacidade funcional auto-reportada, nem para a associação entre percepção da intensidade da dor actual e a incapacidade. Esta pesquisa contribuiu assim, para dar a conhecer factores relevantes avaliar em indivíduos com DCL, podendo a sua modificação contribuir para a prevenir maiores níveis de incapacidade funcional ou melhorar a efectividade do tratamento utilizado. --------------------ABSTRACT: Several studies suggest that psychosocial factors (level of job satisfaction, education level, and the pain catastrophizing and fear-avoidance beliefs) have an important role as factors associated with development of chronicity LBP (Krisma & van Tulder, 2007 ; Kwon et al., 2006, Leclerc et al. 2009; Pincus, Santos, Breen, Burton and Underwood., 2008.) Objective: To assess the association between the variables of pain catastrophizing, fear-avoidance beliefs, pain, intensity pain and self-reported functional disability in a sample of people with chronic LBP. Methodology: The study consisted of 160 employees of the Santa Casa da Misericórdia and Centro de Bem Estar Social of Arronches. Integrated sample of 133 employees who agreed to respond to different assessment tools used (Roland-Morris Disability Questionnaire (RMQ), "Questionnaire Survey of Characterization and Risk Factors and Impact associated with the DCL," "Pain Catastrophing Scale(PCS) and "Fear-Avoidance Beliefs Questionnaire (FABQ). Data collection took place between August and November 2010. Results: In this study, it was found that 39.1% of subjects reported no specific chronic LBP. For the self-reported functional disability, we obtained a medium score of 5.87 on the RMQ. We obtained a value of rs = 0.425, p <0.01, for the association between catastrophizing in pain and disability. Regarding the association between fear-avoidance beliefs, sub-scale physical activity and disability, was obtained a value of rs = 0.074 and for the association between fear-avoidance beliefs, sub-scale work and disability, there was rs = 0.422, p <0.01. Regarding the association between perceived pain intensity and pain disability present we obtained a value rs = 0.177 association between pain and perceived disability in 2009 and measured an outcome of rs = 0.291, p <0.05.Conclusion: That there is a moderate association between catastrophizing and pain self-reported functional disability, and also between fear-avoidance beliefs in relation to employment and self-reported functional disability. Regarding the association between pain and perceived disability in 2009 self-reported the association is low. Not being an association between earavoidance beliefs for physical activity and self-reported functional disability, or for the association between perception of current pain intensity and disability. This research contributed so, to disclose relevant factors evaluate in individuals with chronic LBP, its modification may help to prevent higher levels of functional disability or improve the effectiveness of treatment used.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

RESUMO: Objectivo: Este trabalho teve como objectivo contribuir para o processo de adaptação cultural da Quebec Back Pain Disability Scale (QBPDS), através do estudo da sua Validade de Constructo e Poder de Resposta, e caracterizar a intervenção realizada pela fisioterapia (FT) e os resultados obtidos em utentes com dor crónica lombar (DCL). Introdução: A redução da incapacidade funcional associada à DCL é um dos principais objectivos e resultados da intervenção da FT nestes utentes. Com o intuito de proceder à sua avaliação, pode recorrer-se a um conjunto de diferentes instrumentos de medida, sendo a QBPDS uma das escalas mais utilizadas para medir a incapacidade. Embora esta tenha sido anteriormente adaptada para a população portuguesa, não foram determinadas as suas propriedades psicométricas. Por outro lado, apesar da literatura referir que os serviços de FT são bastante procurados por indivíduos com DCL, em Portugal, a informação existente sobre a prática da FT nesta condição clínica e sobre os resultados obtidos é ainda escassa. Metodologia: Recorreu-se a um estudo de coorte prospectivo com uma amostra de conveniência, constituída por 119 indivíduos com DCL, que iniciaram fisioterapia em 16 centros/ hospitais/ clínicas de Fisioterapia/ utentes no domicílio, e cumpriam os critérios de inclusão e exclusão estabelecidos. Os utentes foram avaliados no momento pré-intervenção e num segundo momento até 6 semanas depois. As propriedades psicométricas da Quebec Back Pain Disability Scale –Versão Portuguesa (QBPDS-VP) avaliadas foram a Validade de Constructo e o Poder de Resposta. Posteriormente procedeu-se à caracterizar a prática da FT quanto às modalidades utilizadas, número de sessões de tratamento e duração do episódio de cuidados. Adicionalmente descreveu-se os resultados obtidos após a intervenção da FT, ao nível da dor e incapacidade. Resultados: Os resultados revelaram um resultado positivo para a Validade de Constructo da QBPDS-VP e um elevado Poder de Resposta (área abaixo da curva ROC = 0,736; IC95%=0,639-0,833). Apresenta ainda uma diferença mínima clinicamente importante (DMCI) de 7 pontos (sensibilidade =72,4% e especificidade = 69,8%). Aquando da intervenção da FT em casos de DCL, existe uma grande diversidade de modalidades realizadas combinadas em diferentes pacotes de intervenção, e verificou-se um número médio de sessões realizadas de 14,22 visitas por utente, numa duração de episódio de cuidados maioritariamente superior a 6 semanas. Os resultados da intervenção revelaram uma redução significativa da incapacidade funcional e da intensidade da dor (z= -7,440 e z=-6,625; respectivamente, p=0,000). Conclusão: Os resultados do presente estudo revelam que a QBPDS-VP possui uma boa Validade de Constructo e Poder de Resposta. Revela ainda que a intervenção da FT em casos de DCL, apesar de apresentar grande diversidade nas modalidades utilizadas por vezes até divergentes das recomendações dadas pelas normas de orientação clínica, e uma duração do episódio de cuidados aparentemente superior aos dados fornecidos pela literatura; proporciona uma redução significativa dos níveis de dor e incapacidade em utentes com DCL.------------ ABSTRACT: Objective: The aim of this study is to contribute to the process of cultural adaptation of the Quebec Back Pain Disability Scale (QBPDS), through the study of its Construct Validity and Responsiveness, and characterize the intervention performed by physical therapy (PT) and the results in patients with chronic low back pain (CLBP). Introduction: The reduction in functional disability associated with CLBP is one of the main purpose and results of physical therapy intervention in these patients. With the intention of evaluating them, the professionals can resort to a set of different measuring instruments, and the QBPDS is one of the most commonly used scales for measuring disability. Although this has been previously adapted for the Portuguese population, it was not determined its psychometric properties. Moreover, despite the literature noted that services for PT are quite sought by individuals with CLBP, in Portugal, the existing information on the practice of PT in this clinical condition and the results obtained are still scarce. Methodology: It was used a prospective cohort study with a convenience sample consisting of 119 individuals with CLBP, who started therapy at 16 centers / hospitals / Physiotherapy clinics / household physiotherapy, and fulfiled the inclusion and exclusion criteria established . The patients were assessed at pre-intervention and a second time after 6 weeks. Psychometric properties of the Quebec Back Pain Disability Scale-Portuguese version (QBPDS-VP) were evaluated to construct validity and responsiveness. Subsequently, it was proceeded to the characterization the practice of FT regarding to the modalities used, the number of treatment sessions and duration of the episode of care. Additionally it was described the results obtained after the intervention of the PT, the level of pain and the disability. Results: The results revealed a positive result for the Construct Validity of the QBPDS- VP and a high responsiveness (area under the ROC curve = 0.736, 95% CI 0.639 to 0.833). Minimal clinically important difference (MCID) also presents a 7-point (sensitivity = 72.4% and specificity = 69.8%). In the PT intervention in cases of CLBP there is a great diversity of procedures performed combined in different packages intervention, and it was found an average number of sessions of 14.22 visits per user, with a duration of the episode of care mostly higher to 6 weeks. The results of the intervention showed a significant reduction of disability and pain intensity (z = -7.440 z = -6.625, respectively, p = 0.000).Conclusion: The results of this study show that QBPDS-VP has a good construct validity and responsiveness. It also reveals that the PT intervention in cases of CLBP, despite showing great diversity in the methods used, that sometimes are also divergent to the recommendations given by clinical guidelines, and with a duration of episode of care apparently superior to data provided by the literature, provides an significant reduction in the levels of pain and disability in patients with DCL.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

High reflective paints (cool paints) are used on flat roofs to reduce heat gains from the incidence of solar radiation and thus improve the thermal comfort and energy efficiency of buildings, especially in summer periods. Given the application potential of these paints on vertical surfaces, a research study has been developed to evaluate the thermal performance of reflective paints on walls under real exposure conditions. Accordingly, different reflective paints have been applied as the final coating of an ETICS type solution, on the facades of a full scale experimental cell built at LNEC campus. For being applied in an ETICS system a paint has to fulfill several requirements, whether aesthetic or functional (such as the adhesion between the coating layers or the durability of the insulation), essential for its efficient performance. Since this construction coating system is subject to a prolonged sun exposure, various problems may arise, such as paint degradation or deterioration of the thermal insulation properties, particularly when dark colors are applied. To evaluate the thermal performance of the chosen paints, the method of non-destructive analysis by Infrared Thermography was used. Thermography allows knowing the temperature distribution of facades by measuring the radiation emitted by their surfaces. To complement the thermographic diagnosis, thermocouples were placed between the insulation and the paint system of the experimental cell. Additional laboratory tests allowed the characterization of the optical properties (reflectance and emittance) of the different reflective paints used in this study. The comparative analysis of the thermal performance of reflective and conventional paints revealed that the reflective paint allows a reduction of the facade surface temperature, reducing the risk of loss of insulating properties of the ETICS system and thus ensuring its longevity and functionality. The color of the paint used affects, naturally, the reflective ability of the surface and may have an important role in energy balance of the building. This paper also showed the potential of infrared thermography in the evaluation of the thermal performance of reflective paints.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Canadian Journal of Civil Engineering 36(10) 1605–16

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This paper aims to provide a model that allows BPI to measure the credit risk, through its rating scale, of the subsidiaries included in the corporate groups who are their clients. This model should be simple enough to be applied in practice, accurate, and must give consistent results in comparison to what have been the ratings given by the bank. The model proposed includes operational, strategic, and financial factors and ends up giving one of three results: no support, partial support, or full support from the holding to the subsidiary, and each of them translates in adjustments in each subsidiary’s credit rating. As it would be expectable, most of the subsidiaries should have the same credit rating of its parent company.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper analyses the provision of auxiliary clinical services that are typically carried out within the hospital. We estimate a exible cost function for the three most important (cost- wise) diagnostic techniques and therapeutic services in Portuguese hospitals: Clinical Pathology, Medical Imaging and Physical Medicine and Rehabilitation. Our objective in carrying out this estimation is the evaluation of economies of scale and scope in the provision of these services. For all services, we nd evidence of ray economies of scale and some evidence of economies of scope. These results have important policy implications and can be related to the ongoing discussion of where and how should hospitals provide these services.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Thesis submitted to the Faculty of Sciences and Technology, New University of Lisbon, for the degree of Doctor of Philosophy in Environmental Sciences

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores