Flexural strengthening by means of a arc overlay in the tension zone

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Estruturas

Contributos para a avaliação económica de medicamentos em Portu

RESUMO: A importância da avaliação económica na área da saúde tem sido crescente ao longo das últimas três décadas. É um campo de análise multi-disciplinar pelo qual se têm vindo a interessar investigadores de todo o mundo e onde, naturalmente, a economia da saúde tem contributos significativos para dar. Contudo, é uma área ainda relativamente inexplorada em termos de investigação metodológica em Portugal. Espera-se com este trabalho colmatar algumas das lacunas existentes e lançar pontes para investigação futura. Neste estudo pretendem-se desenvolver contributos autónomos, numa óptica de resolução de problemas concretos, para a avaliação económica de medicamentos em Portugal. Em primeiro lugar abordou-se a importância da estimação dos custos nos estudos de avaliação económica em saúde. Em segundo lugar determinou-se o custo de um doente com esclerose múltipla, por nível de severidade em Portugal com recurso à metodologia de estudos custo da doença. Em terceiro lugar, aplicando a mesma metodologia, determinou-se o custo de um doente com psoríase, por nível de severidade, em Portugal. Em quarto lugar mediu-se o impacto da psoríase na qualidade de vida relacionada com a saúde dos indivíduos afectados através de dois instrumentos genéricos de medição da qualidade de vida relacionada com a saúde (SF-36 e EQ-5D) e de dois instrumentos específicos (DLQI e PDI). Em quinto lugar, foi feita a adaptação de um modelo sobre a prevenção do tromboembolismo venoso em cirurgia ortopédica ao contexto nacional com recurso a dados recolhidos numa amostra de hospitais portugueses. Foi ainda apresentada uma estimativa do impacto orçamental decorrente da inclusão, ou não, de um novo medicamento na prática nacional. ABSTRACT: The importance of economic evaluation in the health care sector has been growing in the last three decades. It is a multidisciplinary field of research that attracts attention from researchers working all over the world. It is should be noted that health economics can contribute significantly to the development of this area. However, in Portugal is difficult to find methodological contributes in this field of research. With this work one hope to be able to overcome some of the existing shortcomings. This study seeks to develop independent contributions for the economic evaluation of pharmaceuticals in Portugal, aiming to help to solve existing problems. Firstly, one approached the importance of the accurate estimation of costs in economic evaluations of pharmaceuticals. Secondly, the cost of patient with multiple sclerosis was estimated, by severity level, in Portugal, using a cost of illness methodology. In third place, employing the same methodology, the cost of patient with psoriasis by severity level was estimated for Portugal. In fourth place, the impact of psoriasis in the quality of life related to health was ascertained by two generic measures (SF-36 and EQ-5D) and two specific measures (DLQI and PDI). Lastly, a model on the prevention of venous thromboembolism in orthopedic surgery was adapted for Portugal through the inclusion of data collected in a sample of Portuguese hospita

Viability of ceramic residues in lime-based mortars

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland

Earth-based repair mortars: experimental analysis with different binders and natural fibers

RESTAPIA 2012 - Int. Conf. on Rammed Earth Conservation, Valencia, 21-23 June 2012

Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions

Construction and Building Materials 51 (2014) 287–294

Performance assessment of waste fibre-reinforced mortar

Materials Science Forum Vols. 730-732 (2013) pp 617-622

Lime mortars with brick dust and grounded particles for ancient masonry: development and evaluation

HMC08 - 1st Historical Mortars Conference: Characterization, Diagnosis, Conservation, Repair and Compatibilit, LNEC, Lisbon, 24-26 September 2008

Caracterização da adesão terapêutica dos doentes seguidos no Centro Hospitalar Lisboa Norte, EPE, no decurso do tratamento da, Esclerose Múltipla, Esclerose Lateral Amiotrófica, Artrite Reumatóide, Espondilite Anquilosante, Artrite Psoriática, Artrite Idiopática Juvenil Poliarticular, Psoríase em Placas, Polineuropatia Amiloidótica Familiar (Paramiloidose) e HIV/Sida : análise retrospetiva

RESUMO - Objetivos: Caracterizar a adesão à terapêutica nos doentes do CHLN, na área do VIH/SIDA, Esclerose, Artrite Reumatóide, Psoríase e Paramiloidose e avaliar a hipótese de ser possível prever o risco de um doente se tornar, num doente sem adesão. Metodologia: Estudo retrospetivo, observacional e longitudinal, realizado entre Janeiro de 2010 a 31 de Dezembro de 2013, a 4.761 doentes, em que a adesão à terapêutica foi calculada com base nos registos informáticos das dispensas de medicação, efectuados pelos Serviços Farmacêuticos, com recurso à Compliance Rate (CR) e utilizada como variável dependente. A estatística descritiva foi utilizada para caracterizar os doentes e os seus levantamentos e a regressão logística para avaliar o efeito das variáveis (idade, sexo, distrito de residência, período de observação, número de interrupções superiores a trinta dias e tempo até à primeira interrupção) sobre a adesão à terapêutica. Resultados e Conclusões: A percentagem de doentes com adesão foi de 64%, no entanto no HIV/Sida e na Artrite Reumatóide e Psoríase esta percentagem foi significativamente mais baixa, 42% dos doentes interromperam a terapêutica por períodos superiores a 30 dias, ocorrendo essa interrupção maioritariamente entre o primeiro e segundo ano de terapêutica. O modelo de regressão logística permitiu verificar que só com as variáveis sociodemográficas não é possível prever o risco de um doente se tornar num doente sem adesão, sendo para tal necessário adicionar ao modelo a variável número de interrupções superiores a 30 dias que foi identificada como importante factor preditivo da não adesão (OR=15,9, p=0,000).

NHL 3.5 mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. Scrap tire rubber has been studied as aggregate for cementitious materials. Natural hydraulic limes are natural binders with particular characteristics of both air and hydraulic binders. Their specifications became stricter with the last version of EN 459-1:2010. In this study scrap tire rubber was used as additional aggregate of mortars, based on NHL3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained almost directly from industry (only after sieving for preparation of particle sizes similar to mortar aggregate) and separated fine, medium and coarse fractions; 0%, 18%, 36% and 54% weight of binder, corresponding to 2.5%, 5% and 7.5% weight of sand. The influence of the rubbers´ additions on the mortars´ fresh state, mechanical and physical performance is presented, namely by flow table consistency, water retention, fresh bulk density, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Earthen plasters based on illitic soils from Barrocal region of Algarve: contributions for building performance and sustainability

Clayish earth-based mortars can be considered eco-efficient products for indoor plastering since they can contribute to improve important aspects of building performance and sustainability. Apart from being products with low embodied energy when compared to other types of mortars used for interior plastering, mainly due to the use raw clay as natural binder, earth-based plasters may give a significant contribution for health and comfort of inhabitants. Due to high hygroscopicity of clay minerals, earth-based mortars present a high adsorption and desorption capacity, particularly when compared to other type of mortars for interior plastering. This capacity allows earth-based plasters to act as a moisture buffer, balancing the relative humidity of the indoor environment and, simultaneously, acting as a passive removal material, improving air quality. Therefore, earth-based plasters may also passively promote the energy efficiency of buildings, since they may contribute to decreasing the needs of mechanical ventilation and air conditioning. This study is part of an ongoing research regarding earth-based plasters and focuses on mortars specifically formulated with soils extracted from Portuguese ‘Barrocal’ region, in Algarve sedimentary basin. This region presents high potential for interior plastering due to regional geomorphology, that promote the occurrence of illitic soils characterized by a high adsorption capacity and low expansibility. More specifically, this study aims to assess how clayish earth and sand ratio of mortars formulation can influence the physical and mechanical properties of plasters. For this assessment four mortars were formulated with different volumetric proportions of clayish earth and siliceous sand. The results from the physical and mechanical characterization confirmed the significantly low linear shrinkage of all the four mortars, as well as their extraordinary adsorption-desorption capacity. These results presented a positive correlation with mortars´ clayish earth content and are consistent with the mineralogical analysis, that confirmed illite as the prevalent clay mineral in the clayish earth used for this study. Regarding mechanical resistance, although the promising results of the adhesion test, the flexural and compressive strength results suggest that the mechanical resistance of these mortars should be slightly improved. Considering the present results the mortars mechanical resistance improvement may be achieved through the formulation of mortars with higher clayish earth content, or alternatively, through the addition of natural fibers to mortars formulation, very common in this type of mortars. Both those options will be investigated in future research.

Natural hydraulic lime (nhl3.5) mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. In this study scrap tire rubber was used as additional aggregate of mortars based on natural hydraulic lime NHL 3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained directly from industry and separated fine, medium and coarse fractions; 0 %, 18 %, 36 % and 54 % of the weight of binder, corresponding to 2.5 %, 5 % and 7.5 % of the weight of sand. As mortars based on NHL specifications became stricter with the current version of EN 459–1:2015, the influence of the rubber’s additions on the mortars’ fresh state, mechanical and physical performance is presented in this work: flow table consistency, water retention, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity are studied. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.