Microelectromechanical systems. Fabrication and characterization of microcantilevers

Microelectromechanical systems (MEMS) technologies can be used to produce from the simplest structures to the most complex devices and systems. Due to their many applications in various fields, MEMS have turned into one of the most researched areas in microtechnology. In this context, this project was developed in an attempt to produce one of most used structures in MEMS sensing devices - microcantilevers. Several microfabrication techniques were combined to fabricate this type of structures on the top layer of silicon of a silicon-on-insulator (SOI) wafer. After the microcantilevers had been successfully created, an experiment was set up to verify the microcantilevers ability to bend. Here, a voltage was applied between the top and bottom layers of silicon of the SOI wafer. It was then observed that the microcantilevers were deflected all the way to the bottom silicon layer by the electrostatic force acting between them, given that a current was detected when a certain value of applied voltage was reached.

Characterization and identification of printed objects

A study about the physical appearance of pre-photographic, photomechanical, photographic and digital positive reflective prints was made, relating the obtained images with the history, materials and technology used to create them. The studied samples are from the Image Permanence Institute (IPI) study collection. The digital images were obtained using a digital SLR on a copystand and a compound light microscope, with different lighting angles (0º, 45ºand 90º) and magnifications from overall views on the copystand down to a 20x objective lens on the microscope. Most of these images were originally created by IPI for www.digitalsamplebook.org, a web tool for teaching print identification, and will be used on the www.graphicsatlas.org website, along with textual information on identification, technology and history information about these reproduction processes.

Ground Vibrations Induced by High-Speed Trains in Regions with Sudden Foundation Stiffness Change

In this paper analytical transient solutions of dynamic response of one-dimensional systems with sudden change of foundation stiffness are derived. In more details, cantilever dynamic response, expressed in terms of vertical displacement, is extended to account for elastic foundation and then two cantilever solutions, corresponding to beams clamped on left and right hand side, with different value of Winkler constant are connected together by continuity conditions. The internal forces, as the unknowns, can be introduced by the same values in both clamped beam solutions and solved. Assumption about time variation of internal forces at the section of discontinuity must be adopted and originally analytical solution will have to include numerical procedure.

Differences in ERP use and value across Iberian Manufacturing and Services SMEs

Enterprise Resource Planning (ERP) system literature reports very little research on post-adoption stages, that is, actual usage and value. Even fewer studies focus on the specificities of an industry analysis. Based on the Technology-Organizational-Environment (TOE) framework and the Resource-Based View (RBV) theory, we develop a research model to measure and examine determinants of ERP use and value and their impact in the Iberian region (Portugal and Spain) across Manufacturing and Services industries in Small and Medium Enterprises (SMEs). The empirical test was conducted through structural equation modelling, using data from 261 firms in the peninsula in the Manufacturing and Service industries. Results show that amongst ERP use determinants, Training is the most important determinant for Service firms and Compatibility for Manufacturing firms. Firm size, Analytics, and Collaboration contribute to ERP Value in both industries, with Analytics being more important for the Service industry. The paper provides insight into which determinants contribute to ERP use and ERP value in Iberian Manufacturing and Services SMEs, offering managerial and academic implications.

Estudo comparativo de medição da velocidade da onda de pulso: VasoCheck versus complior

A medição da Velocidade da Onda de Pulso (VOP), enquanto meio complementar de diagnóstico e tratamento das doenças cardiovasculares, é considerada um marcador precoce de compromisso arterial em diversos contextos clínicos. O seu papel consolida-se na prevenção primária da patologia arterial, através da avaliação das propriedades mecânicas dos vasos sanguíneos, nomeadamente, quanto à sua rigidez e distensibilidade. Neste trabalho pretende-se comparar os valores experimentais da VOP obtidos com dois métodos de medição diferentes. Para a obtenção das ondas de pulso, utilizaram-se dois equipamentos não-invasivos que permitem uma avaliação in-vivo das propriedades mecânicas dos vasos sanguíneos. Estes distinguem-se pelo princípio físico em que se baseiam: o Complior usa sensores de pressão, baseando-se no princípio piezoeléctrico e o protótipo do equipamento VasoCheck, desenvolvido no nosso grupo da NMT, usa sensores ópticos de infra-vermelho, baseando-se no princípio fotopletismográfico (FPG). As medições com os dois métodos realizaram-se em ambiente controlado, numa amostra de 42 voluntários dos 20 aos 30 anos de idade, de ambos os sexos, saudáveis e sem diagnóstico cardiovascular associado. Os dados experimentais obtidos com os métodos e sensores acima enunciados foram tratados estatisticamente. Os valores da VOP obtidos com o método FPG mostraram-se consistentes e em boa concordância com os obtidos com o método piezoeléctrico. O método FPG aparenta ser mais rápido na sua utilização. Futuramente, evidencia-se importante repetir a série de medições com os dois métodos numa amostra maior, estendendo-a também a voluntários com diagnóstico cardiovascular conhecido. Com base neste trabalho foi apresentada a comunicação painel “Análise comparativa de dois métodos de medição da Velocidade da Onda de Pulso” na International Conference on Health Technology Assessment and Quality Management 2012, realizada a 3 e 4 de Fevereiro de 2012 na Escola Superior de Tecnologia da Saúde de Lisboa.

The new economy: Essays in network economics and two-sided markets

Following the Introduction, which surveys existing literature on the technology advances and regulation in telecommunications and on two-sided markets, we address specific issues on the industries of the New Economy, featured by the existence of network effects. We seek to explore how each one of these industries work, identify potential market failures and find new solutions at the economic regulation level promoting social welfare. In Chapter 1 we analyze a regulatory issue on access prices and investments in the telecommunications market. The existing literature on access prices and investment has pointed out that networks underinvest under a regime of mandatory access provision with a fixed access price per end-user. We propose a new access pricing rule, the indexation approach, i.e., the access price, per end-user, that network i pays to network j is function of the investment levels set by both networks. We show that the indexation can enhance economic efficiency beyond what is achieved with a fixed access price. In particular, access price indexation can simultaneously induce lower retail prices and higher investment and social welfare as compared to a fixed access pricing or a regulatory holidays regime. Furthermore, we provide sufficient conditions under which the indexation can implement the socially optimal investment or the Ramsey solution, which would be impossible to obtain under fixed access pricing. Our results contradict the notion that investment efficiency must be sacrificed for gains in pricing efficiency. In Chapter 2 we investigate the effect of regulations that limit advertising airtime on advertising quality and on social welfare. We show, first, that advertising time regulation may reduce the average quality of advertising broadcast on TV networks. Second, an advertising cap may reduce media platforms and firms' profits, while the net effect on viewers (subscribers) welfare is ambiguous because the ad quality reduction resulting from a regulatory cap o¤sets the subscribers direct gain from watching fewer ads. We find that if subscribers are sufficiently sensitive to ad quality, i.e., the ad quality reduction outweighs the direct effect of the cap, a cap may reduce social welfare. The welfare results suggest that a regulatory authority that is trying to increase welfare via regulation of the volume of advertising on TV might necessitate to also regulate advertising quality or, if regulating quality proves impractical, take the effect of advertising quality into consideration. 3 In Chapter 3 we investigate the rules that govern Electronic Payment Networks (EPNs). In EPNs the No-Surcharge Rule (NSR) requires that merchants charge at most the same amount for a payment card transaction as for cash. In this chapter, we analyze a three- party model (consumers, merchants, and a proprietary EPN) with endogenous transaction volumes and heterogenous merchants' transactional benefits of accepting cards to assess the welfare impacts of the NSR. We show that, if merchants are local monopolists and the network externalities from merchants to cardholders are sufficiently strong, with the exception of the EPN, all agents will be worse o¤ with the NSR, and therefore the NSR is socially undesirable. The positive role of the NSR in terms of improvement of retail price efficiency for cardholders is also highlighted.

Design of a doctorate programme on technology assessment: A sabbatical leave project

The work agenda includes the production of a report on different doctoral programmes on “Technology Assessment” in Europe, the US and Japan, in order to analyse collaborative post-graduation activities. Finally, the proposals on collaborative post-graduation programme between FCTUNL and ITAS-FZK will be organised by an ongoing discussion process with colleagues from ITAS.

Development of new methodologies in sample treatment for proteomics workflow based on enzymatic probe sonication technology and mass spectrometry

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, for the degree of Doctor of Philosophy in Biochemistry

Synthesis about a collaborative project on “Technology Assessment of Autonomous System

The project started in 2009 with the support of DAAD in Germany and CRUP in Portugal under the “Collaborative German-Portuguese University Actions” programme. One central goal is the further development of a theory of technology assessment applied to robotics and autonomous systems in general that reflects in its methodology the changing conditions of knowledge production in modern societies and the emergence of new robotic technologies and of associated disruptive changes. Relevant topics here are handling broadened future horizons and new clusters of science and technology (medicine, engineering, interfaces, industrial automation, micro-devices, security and safety), as well as new governance structures in policy decision making concerning research and development (R

Decision making processes based on innovation indicators: which implications for technology assessment?

Based on the report for “Project IV” unit of the PhD programme on Technology Assessment. This thesis research has the supervision of António Moniz (FCT-UNL and ITAS-KIT) and Manuel Laranja (ISEG-UTL). Other members of the thesis committee are Stefan Kuhlmann (Twente University), Leonhard Hennen (Karlsruhe Institute of Technology-ITAS), Tiago Santos Pereira (Universidade de Coimbra/CES) and Cristina Sousa (FCT-UNL).

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Towards an integrated technology management across the rail supply chain extended to society: building the case study on high-speed trains

The present paper was prepared for the course “Project III”, with the supervision of Prof. António Moniz, reporting on the author speaking notes at the Winter School on Technology Assessment, 6-7 December 2010, as part of the Doctoral Programme on Technology Assessment at FCT-UNL.

ReedCob – An eco-efficient building technology for monolithic walls based on earth and reeds

4th Conference COST ACTION FP1303 – Designing with Bio-based Materials – Challenges and opportiunities. INIA – CSIC, Madrid, 24-25 February 2016. Book of abstracts, T.Troya, J.Galván, D.Jones (Eds.), INIA and IETcc – CSIS, pg. 79-80 (ISBN: 978-91-88349-16-3)