On-line system for faults detection in induction motors based on PCA

Dissertation to obtain the degree of Master in Electrical and Computer Engineering

Análise de dados de vibração – Contributo para a definição do Estado de Condição

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Modelação de equações estruturais para avaliar e monitorizar o estado de condição de um sistema mecânico.

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

Monitoring morphisms to support sustainable interoperability of enterprise systems

Dissertation to obtain the Master degree in Electrical Engineering and Computer Science

Recent droughts and the impact of North Atlantic Oscillation in Iberia; a spatiotemporal analysis based on vegetation temperature condition Index (VTCI)

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Rigid pavements distresses - pavement condition index evaluation

Pavements require maintenance in order to provide good service levels during their life period. Because of the significant costs of this operation and the importance of a proper planning, a pavement evaluation methodology, named Pavement Condition Index (PCI), was created by the U.S. Army Corps of Engineers. This methodology allows for the evaluation of the pavement condition along the life period, generally yearly, with minimum costs and, in this way, it is possible to plan the maintenance action and to adopt adequate measures, minimising the rehabilitation costs. The PCI methodology provides an evaluation based on visual inspection, namely on the distresses observed on the pavement. This condition index of the pavement is classified from 0 to 100, where 0 it is the worst possible condition and 100 the best possible condition. This methodology of pavement assessment represents a significant tool for management methods such as airport pavement management system (APMS) and life-cycle costs analysis (LCCA). Nevertheless, it has some limitations which can jeopardize the correct evaluation of the pavement behavior. Therefore the objective of this dissertation is to help reducing its limitations and make it easier and faster to use. Thus, an automated process of PCI calculation was developed, avoiding the abaci consultation, and consequently, minimizing the human error. To facilitate also the visual inspection a Tablet application was developed to replace the common inspection data sheet and thus making the survey easier to be undertaken. Following, an airport pavement condition was study accordingly with the methodology described at Standard Test Method for Airport Pavement Condition Index Surveys D5340, 2011 where its original condition level is compared with the condition level after iterate possible erroneous considered distresses as well as possible rehabilitations. Afterwards, the results obtained were analyzed and the main conclusions presented together with some future developments.

Spatial and temporal analysis of recent drought using vegetation temperature condition index: case of Somali regional state of Ethiopia

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Gestão de infra-estruturas e avaliação de equipamentos laboratoriais

RESUMO: A confiabilidade e qualidade dos resultados clínicos de um laboratório, estão dependentes da qualidade do equipamento onde estes são processados. A qualidade de um equipamento consiste em apresentar resultados com uma confiabilidade metrológica de acordo com os processos de medição realizados. Desta forma, os equipamentos de medição devem conter características metrológicas de acordo com os requisitos dos processos que estão inseridos, tais como: erro máximo, incerteza, resolução… Todos os equipamentos por muito bons que sejam, apresentam perdas das suas características metrológicas ao longo do tempo, o que se torna importante a determinação periódica das suas calibrações, manutenções e o seu respectivo ajuste. A periodicidade das calibrações, devem ser baseadas, em critérios bem estabelecidos de modo a evitar a ocorrência da não conformidade, devido às medições com os equipamentos fora das suas especificações, garantindo-se assim, a confiabilidade metrológica e o aumento da produtividade devido ao controlo dos processos, evitando-se desta forma qualquer tipo de avaria por parte destes. Os normativos de Qualidade e Certificação estabelecem como requisito a calibração dos equipamentos de medição em intervalos adequados, mas não definem claramente qual o intervalo adequado. O importante é gerir as etapas de calibração e manutenção de acordo com os equipamentos de modo a garantir que os resultados emitidos por estes sejam mantidos em condições confiáveis, dentro do período entre calibrações e manutenções, de modo a que nãoocorra uma condição de falha, e por conseguinte, medições com grande quantidade de erros.------------ ABSTRACT: The reliability and quality of the results of a clinical laboratory, are dependent on the quality of the equipment where they are processed. The quality of a product is to present results with a metrological reliability according to the measuring processes carried out. Thus, measuring equipment must contain metrological characteristics according to the requirements of the processes that are included, such as: maximum error, uncertainty, resolution ... All equipment for very good they are, show losses of its metrological characteristics over time, it becomes important to determine its periodic calibrations, maintenance and its adjustment. The frequency of calibrations should be based on well-established criteria in order to avoid the occurrence of non-compliance due to the measurements with the equipment beyond its specifications, thus ensuring the metrological reliability and increased productivity due to the control of processes, thus avoiding any kind of damage on the part thereof. The normative and Quality Certification as a requirement to establish calibration of measuring equipment at appropriate intervals, but not clearly stipulate the proper range. It is important to manage the steps of calibration and maintenance equipment according to ensure that the results emitted by these conditions are maintained in trusted within the period between calibrations and maintenance, sothat there occurs a fault condition, and therefore, large amount of measurements with errors.

The Farrell and Shapiro condition revisited

The purpose of this paper is to study the consequences of using the Farrell and Shapiro (1990) sufficient condition for merger approval to sectors in which a downstream horizontal merger may also affect upstream firms. As will be shown below, in some circumstances the sign of the relevant external effect can no longer be established by considering the merger as a sequence of in finitesimal mergers, each corresponding to a marginal change in output.

Anthropocentric-based robotic and autonomous systems: assessment for new organisational options

Text based on the paper presented at the Conference "Autonomous systems: inter-relations of technical and societal issues" held at Monte de Caparica (Portugal), Universidade Nova de Lisboa, November, 5th and 6th 2009 and organized by IET-Research Centre on Enterprise and Work Innovation

Probabilistic maintenance and optimization strategies for deteriorating civil infrastructures

In developed countries, civil infrastructures are one of the most significant investments of governments, corporations, and individuals. Among these, transportation infrastructures, including highways, bridges, airports, and ports, are of huge importance, both economical and social. Most developed countries have built a fairly complete network of highways to fit their needs. As a result, the required investment in building new highways has diminished during the last decade, and should be further reduced in the following years. On the other hand, significant structural deteriorations have been detected in transportation networks, and a huge investment is necessary to keep these infrastructures safe and serviceable. Due to the significant importance of bridges in the serviceability of highway networks, maintenance of these structures plays a major role. In this paper, recent progress in probabilistic maintenance and optimization strategies for deteriorating civil infrastructures with emphasis on bridges is summarized. A novel model including interaction between structural safety analysis,through the safety index, and visual inspections and non destructive tests, through the condition index, is presented. Single objective optimization techniques leading to maintenance strategies associated with minimum expected cumulative cost and acceptable levels of condition and safety are presented. Furthermore, multi-objective optimization is used to simultaneously consider several performance indicators such as safety, condition, and cumulative cost. Realistic examples of the application of some of these techniques and strategies are also presented.

Protocolo de fisioterapia, com auxílio de biofeedback electromiográfico, em utentes com disfunções do ombro: efeitos na dor, funcionalidade e estabilidade dinâmica

RESUMO: Introdução: A dor e disfunções do movimento no complexo articular do ombro (CAO) são comuns e debilitantes. O uso de exercícios segundo os pressupostos de estabilidade dinâmica (ED), com auxílio de Biofeedback electromiográfico (BEMG) tem vindo a ser referido, como uma forma de aumentar a efectividade da intervenção nas disfunções do complexo articular do ombro (DCAO)Objectivo Principal: Estudar os efeitos de um protocolo de intervenção, com BEMG, cujas finalidades foram abolir a dor, aumentar a funcionalidade e a ED da omoplata, em utentes com DCAO. Objectivos secundários: Comparar os subgrupos e quanto às características, resultados, tempos de intervenção total e até atingir critérios de alta; Comparar os resultados nos momentos inicial e final. Métodos: Foi realizado um coorte clínico, longitudinal, retrospectivo, observacional, analítico. A amostra foi constituída por 82 sujeitos, divididos em dois subgrupos (n=53 SCSA e n=29 IGU). Os instrumentos de medida utilizados foram a EVA, o DASH, o SPADI e o BEMG. Foi seguido o protocolo de ED proposto por Santos e Matias (2007), de acordo com as 3 fases de intervenção por eles descritas, realizando uma sessão semanal, monitorizando exercícios que seguem estes princípios, com BEMG. Foram avaliadas as variáveis dor, postura, padrão de recrutamento, controlo motor, posição inicial da omoplata (PIO), amplitudes articulares (AA’s), força muscular (FM) e postura. Para analisar os dados, recorreu-se a estatística descritiva e inferencial. Resultados: A intervenção foi efectiva na abolição da dor no momento (0,43 para 0,00/10EVA no subgrupo SCSA e 0,66 para 0,00/10EVA no subgrupo IGU) na pior dor (5,47/10EVA para 0,06/10EVA no subgrupo SCSA e 5,28/10 para 0,14/10 no subgrupo IGU), no aumento da função (28,57 para 0,66/100DASH e 39,00 para 0,63/100SAPDI no subgrupo SCSA e 25,80 para 0,38/100DASH e 28,19 para 0,39/100 no subgrupo IGU) e no aumento da ED da omoplata com normalização do padrão de recrutamento, controlo motor, PIO dentro do espectro de normalidade e boa capacidade de controlar a sua posição, ao longo do movimento do membro superior (MS). A intervenção proporcionou, ainda a normalização das AA’s, FM e autocorrecção postural. O tempo médio de intervenção foi de 6,45semanas no subgrupo SCSA e 5,83sem no subgrupo IGU. Estes resultados são semelhantes comparativamente a estudos que utilizaram uma intervenção baseada nos mesmos princípios (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusão: O protocolo de intervenção aplicado, com uso de exercícios baseados nos princípios da ED e uso de BEMG, permitiu o alcance dos objectivos, junto de utentes com DCAO (SCSA e IGU). Verificou-se que, independentemente da condição, os resultados foram idênticos em ambos subgrupos, não apresentando diferenças significativas entre as variáveis de medida final, o tempo total de intervenção e os tempos até atingir os critérios de alta, expecto para a Dor, sendo este superior no subgrupo SCSA.---------------------------------------- ABSTRACT:Introduction: Movement disorders and pain in the shoulder joint complex (SJC) are common and debilitating. The use of exercises under the premises of dynamic stability (DS), with the aid of electromyographic biofeedback (EMGBF) has been mentioned as a way to increase the effectiveness of the intervention in disorders of the shoulder joint complex (DSJC) Main Objective: To evaluate the results of an intervention protocol, with EMGBF whose aims were to abolish the pain, increase functionality and DS of the scapula in patients with DSJC. Objectives: To compare the subgroups and the characteristics, outcomes, and total intervention times to reach discharge criteria; to compare the results at the beginning and at the end. Methods: We conducted a clinical cohort, longitudinal, retrospective, observational analysis. The sample consisted of 82 subjects, divided into two subgroups (n = 53 shoulder impingement syndrome SIS n = 29 shoulder joint instability SJI). The measurement instruments used were the VAS, DASH, SPADI, and EMGBF. It was followed the DS protocol proposed by Santos and Matias (2007), according to the three phases of intervention, described by performing a weekly session, monitoring exercises that follow these principles, with EMGBF. The variables were pain, posture, recruitment pattern, motor control, the initial position of the scapula (IPS), range of motion (ROM), muscular strength (MS) and posture. To analyze the data, we used the descriptive and inferential statistics. Results: The intervention was effective in abolishing the pain at the time (0.43 to 0.00/10 VAS in the SIS subgroup and 0.66 to 0.00/10 VAS in the SJI subgroup) in worst pain (5.47 to 0,06/10 VAS in the SIS subgroup and 5.28/ to 0.14/10 VAS in the SJI subgroup), increasing the function (28,57 to 0,66/100 DASH and 39,00 to 0,63/100 SAPDI in the SIS subgroup and 25,80 to 0,38/100 DASH and 28,19 to 0,39/100 SPADI in the SJI subgroup) and the increase in DS of the scapula with normalization of the pattern recruitment, motor control, IPS within the spectrum of normalcy and good ability to control its position along the movement of the upper limb (UL). The intervention provided, although the normalization of ROM, MS and self-correcting posture. The average length of intervention was 6.45 weeks in the SIS subgroup and 5.83 in the IS subgroup. These results are comparable with similar studies that used an intervention based on the same principles (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusion: The intervention protocol implemented with the use of exercises based on the principles of DS and the use of EMGBF was effective, allowing the accomplishment of goals, in patients with DSJC (SIS and SJI). It was found that, regardless of condition, the results were identical in both groups, showing no significant differences between the variables of the final measure, the total time of intervention and the times to reach discharge criteria, except for pain, which was higher in the SIS subgroup.

Cidadão e comunidade : que relevância no processo de contratualizaç

RESUMO - Nas últimas décadas, a especialização dos cuidados médicos tem conduzido a uma fragmentação do sistema de prestação, que, associada a uma deficiente coordenação entre serviços, cuidados e prestadores, torna a navegabilidade dos utentes nos sistemas de saúde uma tarefa complexa. Um novo modelo de organização, assente na procura de valor para os cidadãos, deve adoptar uma abordagem sistémica, que tenha subjacente uma coordenação integrada de serviços, numa perspectiva de ciclo de cuidados. Reorientar a prestação de cuidados para a obtenção de resultados e valor em saúde, exige uma reengenharia em torno da estrutura, organização e avaliação1 dos cuidados, requerendo, nomeadamente: i) instrumentos e ferramentas que auxiliem e estruturem este novo modelo; ii) assumpção dos papéis definidos para cada um dos actores do sistema, nomeadamente ao nível da coordenação; iii) encorajamento à adopção de modelos de contratualização, pagamento e competição, que responsabilizem os actores envolvidos não só pela prática que desenvolvem, mas pelos resultados em saúde. Estes mecanismos constituem uma oportunidade para expandir e sustentar abordagens, programas e intervenções integradas. Investir num sistema de pagamento por valor em saúde — P4V — payment for value, traduz uma aposta na relação entre diagnóstico, tratamento, resultados clínicos e custos, enquanto estratégia para assegurar ganhos em qualidade dos cuidados, eficiência dos processos e valor em saúde para o cidadão. Neste contexto, a gestão da doença enquanto modelo direccionado para o reforço da perspectiva e participação activa do cidadão, e avaliação compreensiva de novas formas de organização e gestão do sistema de prestação, constitui um instrumento para informar e sustentar esse processo de reengenharia do sistema. Um modelo que procura assegurar o encontro entre o estado da arte na prestação de cuidados e um nível óptimo, garantindo a qualidade de vida expectável para a pessoa com doença crónica. ----------------- ---------ABSTRACT – In the last decades advanced medical sciences trend to specialized care and fragmented health systems, leaving patients with a challenge on navigating services and care, requiring them to see a sequence of specialists each delivering discrete interventions. To overcome these challenges, every health system must redefine health care delivery to use its resources more efficiently and improve quality of care through an organization of the system as a whole. A system currently organized around value for patients, entails a framework that comprises the entire set of activities needed to address a patient´s medical condition, over the full cycle of care. Value- based care delivery therefore requires an integrated practice, both across services and time, and implies a movement through new structures, organization models, evaluation efforts and payment systems that enables, catalyze and reinforces the extension and sustainability of the steps needed to the change required. A shift from a payment for performance to a payment for value focuses attention on maximizing the overall value of care, and encourages coordination and integration between components of care that extends from screening, diagnoses, all the way through treatment, outcomes and costs, and ensuring an incentive for potentially high value types of care as well as innovation. These leave the actors of the system with the task of best allocating and valuing components of care. Disease management as a model designed to structure patient engagement and involvement in their care, and assure a comprehensive evaluation and monitoring of new organization and care delivery strategies align an opportunity as a source of information and sustainability for the progress of a growing number of likeminded efforts now underway across care delivery for chronic diseases. This framework will allow the fulfillment of the gap between sta

A reliability-based measure of robustness for concrete structures subjected to corrosion

This work is a contribution to the definition and assessment of structural robustness. Special emphasis is given to reliability of reinforced concrete structures under corrosion of longitudinal reinforcement. On this communication several authors’ proposals in order to define and measure structural robustness are analyzed and discussed. The probabilistic based robustness index is defined, considering the reliability index decreasing for all possible damage levels. Damage is considered as the corrosion level of the longitudinal reinforcement in terms of rebar weight loss. Damage produces changes in both cross sectional area of rebar and bond strength. The proposed methodology is illustrated by means of an application example. In order to consider the impact of reinforcement corrosion on failure probability growth, an advanced methodology based on the strong discontinuities approach and an isotropic continuum damage model for concrete is adopted. The methodology consist on a two-step analysis: on the first step an analysis of the cross section is performed in order to capture phenomena such as expansion of the reinforcement due to the corrosion products accumulation and damage and cracking in the reinforcement surrounding concrete; on the second step a 2D deteriorated structural model is built with the results obtained on the first step of the analysis. The referred methodology combined with a Monte Carlo simulation is then used to compute the failure probability and the reliability index of the structure for different corrosion levels. Finally, structural robustness is assessed using the proposed probabilistic index.