Comportamento da ligação CFRP/betão em estruturas de betão armado

O presente trabalho centra-se no estudo de um sistema de reforço de estruturas de betão armado que se tem tornado bastante utilizado, o reforço com materiais compósitos. Os materiais compósitos utilizados neste estudo são polímeros reforçados com fibras de carbono (CFRP – Carbon Fiber Reinforced Polymer). A ligação deste compósito aos elementos de betão é feita através de resina, neste caso utilizou-se resina epoxídica. Neste sistema de reforço é fulcral garantir que a ligação entre o compósito e o betão é a melhor possível e, por isso, no presente estudo estudou-se esta ligação através de ensaios experimentais de corte simples. Com o intuito de se perceber a influência do comprimento de laminado de CFRP colado ao substrato de betão, foram utilizados diferentes comprimentos colados nos ensaios experimentais. Utilizaram-se duas técnicas de reforço distintas, reforço com compósitos de CFRP colados exteriormente (EBR) e reforço com compósitos de CFRP colados numa ranhura feita no bloco de betão (NSM), com o intuito de se verificar a influência que a técnica de reforço pode ter na eficácia do sistema de reforço, percebendo para qual das técnicas se consegue obter uma melhor aderência entre o laminado de CFRP e o substrato de betão. Foram realizados 11 ensaios de corte simples para a técnica EBR e 8 ensaios de corte simples para a técnica NSM. Neste estudo foi também encontrada uma solução analítica que consegue descrever o comportamento completo da interface entre o material compósito e o substrato de betão. Esta solução analítica foi encontrada a partir de um modelo bond-slip não-linear. Os resultados experimentais obtidos foram analisados e o modelo analítico proposto foi validado com recurso a estudos presentes na literatura e aos resultados experimentais obtidos no presente estudo.

Reforço de elementos estruturais de madeira com materiais compósitos de matriz polimérica

A necessidade de manutenção e reabilitação de estruturas de madeira antigas é, nos dias de hoje, um aspeto bastante importante a nível mundial. Assim, o estudo da eficácia de alguns sistemas de reforço torna-se fulcral. A presente dissertação é um estudo experimental sobre reforço de estruturas de madeira com materiais compósitos. Os materiais compósitos utilizados na componente experimental foram polímeros reforçados com fibras de carbono (CFRP – Carbon Fiber Reinforced Polymer) e estes foram colados ao substrato de madeira com resina epoxídica. O estudo experimental foi composto por duas fases. Na primeira fase realizaram-se ensaios de corte simples e na segunda fase ensaios de flexão. Os ensaios de corte simples foram realizados de modo a estudar a ligação CFRP-madeira e a analisar a influência do comprimento colado de CFRP ao substrato de madeira. Para tal, utilizaram-se duas técnicas de reforço, a técnica EBR (Externally Bonded Reinforcement) em que os laminados de CFRP são colados exteriormente e a técnica NSM (Near Surface Mounted) em que os laminados de CFRP são colados numa ranhura feita no provete de madeira. Foram realizados 17 ensaios de corte simples, 10 com a técnica EBR e 7 com a técnica NSM. Na segunda fase, foram realizados 3 ensaios de flexão sobre pavimentos de madeira reforçados com laminados de CFRP. Para estes ensaios também se utilizaram duas técnicas de reforço, a técnica EBR e uma técnica em que o laminado de FRP é ancorado nas extremidades das vigas. Numa fase final os resultados foram analisados e comparados de modo a tirar conclusões. Concluíu-se que a técnica de reforço NSM apresenta um desempenho superior à técnica EBR nos ensaios de corte simples. Comparativamente à técnica EBR, os pavimentos de madeira com o laminado de CFRP ancorado nas extremidades das vigas apresentaram um melhor desempenho.

Performance assessment of waste fibre-reinforced mortar

Materials Science Forum Vols. 730-732 (2013) pp 617-622

Empirical models for quantification of machining damage in composite materials

Dissertação para obtenção do Grau de Doutor em Engenharia Mecânica

Image processing methodology for assessment of drilling induced damage in CFRP

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Vigas de GFRP reforçadas com ligas de memória de forma

Os materiais poliméricos reforçados com fibras (FRP – Fiber Reinforced Polymer) apresentam grande potencial de aplicações na Engenharia Civil. A sua utilização aumentou consideravelmente nas duas últimas décadas, em virtude das vantagens em relação aos materiais tradicionais, como a leveza, elevada resistência e boas propriedades de isolamento. Todavia, o conhecimento e investigação a cerca destes materiais compósitos é insuficiente, limitando as suas aplicações práticas. A perda das propriedades exibidas por este tipo de materiais, quando sujeitos a temperaturas próximas da temperatura de transição vítrea (

Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Fiber functionalization for biomedical applications

Deep-eutectic solvents (DES) are considered novel renewable and biodegradable solvents, with a cheap and easy synthesis, without waste production. Later it was discovered a new subclass of DES that even can be biocompatible, since their synthesis uses primary metabolites such as amino acids, organic acids and sugars, from organisms. This subclass was named natural deep-eutectic solvents (NADES). Due to their properties it was tried to study the interaction between these solvents and biopolymers, in order to produce functionalized fibers for biomedical applications. In this way, fibers were produced by using the electrospinning technique. However, it was first necessary to study some physical properties of NADES, as well as the influence of water in their properties. It has been concluded that the water has a high influence on NADES properties, which can be seen on the results obtained from the rheology and viscosity studies. The fluid dynamics had changed, as well as the viscosity. Afterwards, it was tested the viability of using a starch blend. First it was tested the dissolution of these biopolymers into NADES, in order to study the viability of their application in electrospinning. However the results obtained were not satisfactory, since the starch polymers studied did not presented any dissolution in any NADES, or even in organic solvents. In this way it was changed the approach, and it was used other biocompatible polymers. Poly(ethylene oxide), poly(vinyl alcohol) and gelatin were the others biopolymers tested for the electrospinning, with NADES. All polymers show good results, since it was possible to obtain fibers. However for gelatin it was used only eutectic mixtures, containing active pharmaceutical ingredients (API’s), instead of NADES. For this case it was used mandelic acid (antimicrobial properties), choline chloride, ibuprofen (anti-inflammatory properties) and menthol (analgesic properties). The polymers and the produced fibers were characterized by scanning electron microscope (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). With the help of these techniques it was possible to conclude that it was possible to encapsulate NADES within the fibers. Rheology it was also study for poly(ethylene oxide) and poly(vinyl alcohol), in a way to understand the influence of polymer concentration, on the electrospinning technique. For the gelatin, among the characterization techniques, it was also performed cytotoxicity and drug release studies. The gelatin membranes did not show any toxicity for the cells, since their viability was maintained. Regarding the controlled release profile experiment no conclusion could be drawn from the experiments, due to the rapid and complete dissolution of the gelatin in the buffer solution. However it was possible to quantify the mixture of choline chloride with mandelic acid, allowing thus to complete, and confirm, the information already obtained for the others characterization technique.

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.