Modellus: Learning Physics with Mathematical Modelling

Tese de doutoramento em Ciências da Educação, área de Teoria Curricular e Ensino das Ciências

Parallel programming in biomedical signal processing

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Reacção de cisão da molécula de azoto em xénon supercrítico

Apenas há 100 anos atrás foi finalmente estabelecido que os sistemas biológicos têm a capacidade de fixar o azoto. A Química ainda se encontrava atrasada, mas em 1913, Haber e Bosh projectaram a primeira instalação comercial de fixação do azoto e fundaram a indústria química inorgânica moderna. Os mecanismos destes dois processos relacionados são, no entanto, muito diversos. Laplaza e Cummins apresentaram na revista Science uma reacção que representa o culminar de 30 anos de trabalho da comunidade química na fixação de azoto em condições próximas das atmosféricas. Esta descoberta apresenta um complexo inorgânico simples que pode quebrar a ligação tripla da molécula de azoto para formar um novo nitrilo-complexo sem a necessidade de qualquer outro reagente. Esta publicação inspirou o trabalho apresentado nesta tese. Como a transferência de massa entre as fases – gasosa (azoto) e o solvente líquido – constituía um factor limitativo da cinética da reacção, assim a utilização de um solvente supercrítico pareceu ser uma melhoria óbvia. O xénon é o único fluido supercrítico, à temperatura ambiente suficientemente inerte quimicamente para ser usado como solvente em contacto com uma substância extremamente reactiva, capaz de quebrar a ligação da molécula de azoto. Neste trabalho, a reacção descoberta por Laplaza e Cummins foi efectuada em xénon supercrítico. A realização desta reacção envolveu diversas etapas: 1. As sínteses do composto Mo(NRAr)3 (1) (onde R é C(CD3)2CH3 e Ar é 3,5-C6H3(CH3)2), usando caixa de luvas e técnicas sob atmosfera de árgon; 2. A construção de uma nova instalação, projectada para a realização da reacção do composto 1 com o azoto em xénon supercrítico, com monitorização contínua através de espectrofotometria visível; 3. A introdução de sucessivas modificações devido a dificuldades experimentais imprevistas conduziu à reconstrução substancial da primeira instalação utilizada, de forma a ser possível medir a solubilidade do composto 1 em xénon supercrítico, e de proporcionar a difusão do azoto no xénon. 4. Medições da solubilidade do complexo 1 em xénon supercrítico, à temperatura ambiente e pressões entre 6 e 10MPa; 5. Medições da cinética da reacção do composto 1 com azoto gasoso, usando xénon supercrítico como solvente, em diversas condições, com diversos ambientes de solventes, em diferentes quantidades do composto 1, e usando métodos de detecção completamente diferentes do método espectroscópico inicialmente programado; 6. Utilização de simulações em CFD (Computer Fluid Dynamics) para interpretar os resultados obtidos. Estas simulações sugerem que a elevada densidade do xénon induz a sedimentação lenta do excesso (não dissolvido) do composto 1, que controla a distribuição do produto da reacção dentro do reactor. A conclusão principal foi a de que a cisão da ligação da molécula do azoto pelo composto 1 pode ser obtida em segundos em xénon supercrítico.

Active bionanoconjugates of laccase and gold nanoparticles: kinetic and structural studies

Thesis for the master degree in Structural and Functional Biochemistry

Three transducers for one photodetector: essays for optical communications

Dissertation presented to obtain the PhD degree in Electrical and Computer Engineering - Electronics

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing a finite element solution is a well-known technique, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Postprocessing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. Consequently such an approach can be exceptionally good in modelling of resin infiltration under quasi steady-state assumption by remeshing techniques and with explicit time integration, because only the free-front normal velocities are necessary to advance the resin front to the next position. The new contribution is the post-processing analysis and implementation of the freeboundary velocities of mesolevel infiltration analysis. Such implementation ensures better accuracy on even coarser meshes, which in consequence reduces the computational time also by the possibility of employing larger time steps.

Advanced image processing techniques for detection and quantification of drusen

Dissertation presented to obtain the degree of Doctor of Philosophy in Electrical Engineering, speciality on Perceptional Systems, by the Universidade Nova de Lisboa, Faculty of Sciences and Technology

Virtual Campus for the University of Jaume I, Castelló, Spain: 3D Modelling of the Campus Buildings using CityEngine

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Constraint-based modelling of mixed microbial populations: Application to polyhydroxyalkanoates production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Ionic liquids as catalysts of lignocellulosic biomass processing

The present work is devoted to study the pre-treatment of lignocellulosic biomass, especially wheat straw, by the application of the acidic ionic liquid (IL) such as 1-butyl-3-methylimidazolium hydrogen sulphate. The ability of this IL to hydrolysis and conversion of biomass was scrutinised. The pre-treatment with hydrogen sulphate-based IL allowed to obtain a liquor rich in hemicellulosic sugars, furans and organic acids, and a solid fraction mainly constituted by cellulose and lignin. Quantitative and qualitative analyses of the produced liquors were made by capillary electrophoresis and high-performance liquid chromatography. Pre-treatment conditions were set to produce xylose or furfural. Specific range of temperatures from 70 to 175 °C and residence times from 20.0 to 163.3 min were studied by fixing parameters such as biomass/IL ratio (10 % (w/w)) and water content (1.25 % (w/w)) in the pre-treatment process. Statistical modelling was applied to maximise the xylose and furfural concentrations. For the purpose of reaction condition comparison the severity factor for studied ionic liquid was proposed and applied in this work. Optimum conditions for xylose production were identified to be at 125 °C and 82.1 min, at which 16.7 % (w/w) xylose yield was attained. Furfural was preferably formed at higher pre-treatment temperatures and longer reaction time (161 °C and 104.5 min) reaching 30.7 % (w/w) maximum yield. The influence of water content on the optimum xylose formation was also studied. Pre-treatments with 5 and 10 % (w/w) water content were performed and an increase of 100 % and 140 % of xylose yield was observed, respectively, while the conversion into furfural maintained unchanged.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Mobile image processing to support educational geometry games

The mobile IT era is here, it is still growing and expanding at a steady rate and, most of all, it is entertaining. Mobile devices are used for entertainment, whether social through the so-called social networks, or private through web browsing, video watching or gaming. Youngsters make heavy use of these devices, and even small children show impressive adaptability and skill. However not much attention is directed towards education, especially in the case of young children. Too much time is usually spent in games which only purpose is to keep children entertained, time that could be put to better use such as developing elementary geometric notions. Taking advantage of this pocket computer scenario, it is proposed an application geared towards small children in the 6 – 9 age group that allows them to consolidate knowledge regarding geometric shapes, forming a stepping stone that leads to some fundamental mathematical knowledge to be exercised later on. To achieve this goal, the application will detect simple geometric shapes like squares, circles and triangles using the device’s camera. The novelty of this application will be a core real-time detection system designed and developed from the ground up for mobile devices, taking into account their characteristic limitations such as reduced processing power, memory and battery. User feedback was be gathered, aggregated and studied to assess the educational factor of the application.