Bioinspired polyethersulfone-based hollow fiber membranes as the scaffolds in renal assist device for protein-bound toxins removal from blood

Dissertation for obtaining the Master degree in Membrane Engineering

Development of Chitosan and Poly (Vinyl Alcohol) Blended scaffolds for cell culture using supercritical fluids technology

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Mestrado Integrado em Engenharia Química e Bioquímica

Storage of water molecules into biomimetic heterostructures: the role of roughness

The development of devices based on heterostructured thin films of biomolecules conveys a huge contribution on biomedical field. However, to achieve high efficiency of these devices, the storage of water molecules into these heterostructures, in order to maintain the biological molecules hydrated, is mandatory. Such hydrated environment may be achieved with lipids molecules which have the ability to rearrange spontaneously into vesicles creating a stable barrier between two aqueous compartments. Yet it is necessary to find conditions that lead to the immobilization of whole vesicles on the heterostructures. In this work, the conditions that govern the deposition of open and closed liposomes of 1.2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (sodium Salt) (DPPG) onto polyelectrolytes cushions prepared by the layer-by-layer (LbL) method were analyzed. Electronic transitions of DPPG molecules as well as absorption coefficients were obtained by vacuum ultraviolet spectroscopy, while the elemental composition of the heterostructures was characterized by x-ray photoelectron spectroscopy (XPS). The presence of water molecules in the films was inferred by XPS and infrared spectroscopy. Quartz crystal microbalance (QCM) data analysis allowed to conclude that, in certain cases, the DPPG adsorbed amount is dependent of the bilayers number already adsorbed. Moreover, the adsorption kinetics curves of both adsorbed amount and surface roughness allowed to determine the kinetics parameters that are related with adsorption processes namely, electrostatic forces, liposomes diffusion and lipids re-organization on surface. Scaling exponents attained from atomic force microscopy images statistical analysis demonstrate that DPPG vesicles adsorption mechanism is ruled by the diffusion Villain model confirming that adsorption is governed by electrostatic forces. The power spectral density treatment enabled a thorough description of the accessible surface of the samples as well as of its inner structural properties. These outcomes proved that surface roughness influences the adsorption of DPPG liposomes onto surfaces covered by a polyelectrolyte layer. Thus, low roughness was shown to induce liposome rupture creating a lipid bilayer while high roughness allows the adsorption of whole liposomes. In addition, the fraction of open liposomes calculated from the normalized maximum adsorbed amounts decreases with the cushion roughness increase, allowing us to conclude that the surface roughness is a crucial variable that governs the adsorption of open or whole liposomes. This conclusion is fundamental for the development of well-designed sensors based on functional biomolecules incorporated in liposomes. Indeed, LbL films composed of polyelectrolytes and liposomes with and without melanin encapsulated were successfully applied to sensors of olive oil.

Characterization of molecular damage induced by UV photons and carbon ions on biomimetic heterostructures

The study of the effect of radiation on living tissues is a rather complex task to address mainly because they are made of a set of complex functional biological structures and interfaces. Particularly if one is looking for where damage is taking place in a first stage and what are the underlying reaction mechanisms. In this work a new approach is addressed to study the effect of radiation by making use of well identified molecular hetero-structures samples which mimic the biological environment. These were obtained by assembling onto a solid support deoxyribonucleic acid (DNA) and phospholipids together with a soft water-containing polyelectrolyte precursor in layered structures and by producing lipid layers at liquid/air interface with DNA as subphase. The effects of both ultraviolet (UV) radiation and carbon ions beams were systematically investigated in these heterostructures, namely damage on DNA by means vacuum ultraviolet (VUV), infrared (IR), X-Ray Photoelectron (XPS) and impedance spectroscopy. Experimental results revealed that UV affects furanose, PO2-, thymines, cytosines and adenines groups. The XPS spectrometry carried out on the samples allowed validate the VUV and IR results and to conclude that ionized phosphate groups, surrounded by the sodium counterions, congregate hydration water molecules which play a role of UV protection. The ac electrical conductivity measurements revealed that the DNA electrical conduction is arising from DNA chain electron hopping between base-pairs and phosphate groups, with the hopping distance equal to the distance between DNA base-pairs and is strongly dependent on UV radiation exposure, due loss of phosphate groups. Characterization of DNA samples exposed to a 4 keV C3+ ions beam revealed also carbon-oxygen bonds break, phosphate groups damage and formation of new species. Results from radiation induced damage carried out on biomimetic heterostructures having different compositions revealed that damage is dependent on sample composition, with respect to functional targeted groups and extent of damage. Conversely, LbL films of 1,2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) liposomes, alternated with poly(allylamine hydrochloride) (PAH) revealed to be unaffected, even by prolonged UV irradiation exposure, in the absence of water molecules. However, DPPG molecules were damaged by the UV radiation in presence of water with cleavage of C-O, C=O and –PO2- bonds. Finally, the study of DNA interaction with the ionic lipids at liquid/air interfaces revealed that electrical charge of the lipid influences the interaction of phospholipid with DNA. In the presence of DNA in the subphase, the effects from UV irrladiation were seen to be smaller, which means that ionic products from biomolecules degradation stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Biomimetic mineralization: encapsulation in calcium carbonate shells

Calcium carbonate biomineralization is a self-assembly process that has been studied to be applied in the biomedical field to encapsulate biomolecules. Advantages of engineering mineral capsules include improved drug loading efficiencies and protection against external environment. However, common production methods result in heterogeneous capsules and subject biomolecules to heat and vibration which cause irreversible damage. To overcome these issues, a microfluidic device was designed, manufactured and tested in terms of selectivity for water and oil to produce a W/O/W emulsion. During the development of this work there was one critical challenge: the selective functionalization in closed microfluidic channels. Wet chemical oxidation of PDMS with 1M NaOH, confirmed by FTIR, followed by adsorption of polyelectrolytes - PDADMAC/PSS - confirmed by UV-Vis and AFM results, render the surface of PDMS hydrophilic. UV-Vis spectroscopy also confirmed that this modification did not affect PDMS optical properties, making possible to monitor fluids and droplets. More important, with this approach PDMS remains hydrophilic over time. However, due to equipment constrains selectivity in microchannels was not achieved. Therefore, emulsion studies took place with conventional methods. Several systems were tried, with promising results achieved with CaCO3 in-situ precipitation, without the use of polymers or magnesium. This mineral stabilizes oil droplets in water, but not in air due to incomplete capsule formation.

Development of biocompatible and “smart” porous structures using CO2-assisted processes

Dissertação apresentada para a obtenção do grau de Doutor em Engenharia Química, especialidade Engenharia da Reacção Química, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Development of molecularly imprinted polymers using supercritical fluid technology

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Análise e projecto de estruturas para substituição do disco intervertebral

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Desenvolvimento de estruturas porosas tridimensionais por moldação por congelamento (Freeze-Casting)

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Produção de espumas 3D porosas por auto-organização de nanofibras de policaprolactona

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Avaliações in vitro da utilização da gelatina como material de suporte à regeneração de tecidos

Neste trabalho foram produzidas matrizes de nanofibras de gelatina de porco e de gelatina de peixe através da técnica de electrofiação. Estas matrizes têm uma estrutura morfológica e química interessantes para o desenvolvimento de scaffolds no âmbito da Engenharia de Tecidos mas a sua instabilidade em água compromete essa aplicação. Assim, as matrizes foram reticuladas recorrendo a dois processos diferentes: um físico (tratamento desidrotérmico - DHT) e outro químico (exposição a vapor de glutaraldeído - GTA). Os resultados obtidos permitiram verificar que a gelatina de porco reticulou mais facilmente que a gelatina de peixe, provavelmente devido a uma maior presença de grupos funcionais capazes de reagir com os processos de reticulação. Foram analisados possíveis efeitos citotóxicos das matrizes reticuladas em culturas de células Vero. Os extratos das matrizes não revelaram ser tóxicos mas o tratamento com GTA comprometeu a adesão das células às matrizes indicando acarretar um certo risco de toxicidade. O uso da glicina revelou-se eficaz na redução dessa toxicidade. Para além das matrizes de fibras sem orientação preferencial (depositadas num coletor plano), foram depositadas fibras paralelamente alinhadas recorrendo a um coletor cilíndrico rotatório. Marcações fluorescentes de células semeadas nos dois tipos de fibras revelaram que o citoesqueleto das células semeadas nas fibras alinhadas se organiza na direção do alinhamento.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Produção e caracterização de espumas 3D obtidas por electrofiação para aplicação em engenharia de tecidos

A produção de estruturas tridimensionais poliméricas tem sido foco de estudo por parte da Engenharia de Células e Tecidos, pelo que mimetizam melhor as condições in vivo dos tecidos. A conjugação das propriedades eléctricas com arquitectura 3D permite uma regeneração tecidual mais eficaz. Desta forma este estudo incidiu na construção de scaffolds, que conjugasse as propriedades mecânicas, eléctricas e biológicas num só suporte. O processo utilizado para produção de scaffolds baseou-se na electrofiação de soluções poliméricas de PCL (8% m/m) com incorporação de óxido de grafeno em diferentes concentrações: 0.01%, 0.1% e 0.25% (m/V). Foram avaliados os parâmetros de electrofiação que permitiram a organização tridimensional. A composição química e a morfologia das membranas foram avaliadas por FTIR-ATR e por microscopia electrónica de varrimento (MEV), respectivamente. Através de ensaios de tracção e de permeabilidade estudou-se a influência de óido de grafeno na matriz polimérica. Foram feitas experiências de redução de óxido de grafeno nas fibras electrofiadas, tanto nas membranas como das espumas, através do uso de vapores de hidrazina. Este mecanismo mostrou-se ineficaz, uma vez que afectou a sua morfologia. As espumas foram avaliadas quanto à sua bioactividade e propriedades mecânicas (ensaios de compressão). Também foram realizados testes de viabilidade celular nas membranas e de adesão celular nas espumas, de forma a avaliar o seu potencial para aplicação biomédica. Os resultados destes ensaios revelaram que óxido de grafeno não apresenta efeitos citotóxicos para o organismo e a sua presença promove a adesão celular ao scaffold.

Study of glycosidic changes in lung cancer: potential effectors in hematogenous metastasis

RESUMO: O cancro do pulmão (LC), uma das principais causas de mortalidade relacionada com cancro em Portugal, pode levar à formação de metástases hematogénicas. A adesão das células tumorais ao endotélio é considerada um dos passos fundamentais envolvidos na metástase. Em células sanguíneas, esta adesão é mediada por ligandos de E-selectina (E-SL), glicoproteínas ou glicolípidos decorados principalmente com sialyl-Lewis x (sLex) e sialyl-Lewis a (sLea). Tem sido descrito a expressão destes antigénios em LC, contudo o seu papel funcional em permitir a adesão das células de LC ao endotélio é ainda pouco compreendido. Foram analisadas amostras emparelhadas normais e tumorais de pacientes com cancro de pulmão de não-pequenas células (NSCLC) e três linhas celulares de LC. Immunoblotting assays com anti-sLex/sLea e molécula quimérica de E-selectina demonstraram que tecidos tumorais de LC sobreexpressam significativamente E-SL e resultados de citometria de fluxo demonstraram uma expressão elevada de E-SL nas linhas celulares. Para compreender o mecanismo da sobreexpressão de E-SL em tecidos tumorais e linhas celulares de LC, foi analisada a expressão de genes envolvidos na biossíntese de E-SL, nomeadamente FUT3, FUT4, FUT6, FUT7, ST3GAL3, ST3GAL4, ST3GAL6, β4GALT1, GCNT1 e GALNT3. Observou-se a sobreexpressão das fucosiltransferases FUT3, FUT6 e FUT7 em tecidos tumorais de LC e FUT3 em linhas celulares de LC, sendo que neste último, esta expressão é correlacionada com um aumento da adesão das células de LC às selectinas endoteliais. Foi observado que uma baixa expressão de FUT4 em tecidos tumorais está associada com estadios menos avançados de NSCLC. Foram analisadas ainda proteínas decoradas com sLex/sLea, tendo-se identificado como E-SL o antigénio carcinoembrionário em NSCLC. Em resumo, esta tese contribuiu para uma melhor compreensão das alterações glicosídicas e moléculas que podem influenciar a progressão tumoral do LC, podendo permitir identificar futuramente novos biomarcadores de diagnóstico/prognóstico e potenciais alvos terapêuticos para o NSCLC.--------------------------ABSTRACT: Lung cancer (LC), one of the major causes of mortality related to cancer in Portugal, may lead to hematogenous metastasis. Adhesion of cancer cells to endothelium is considered one of the crucial steps involved in metastasis. In blood cells, this adhesion is initiated by endothelial selectin ligands (E-SL) that are glycoproteins or glycolipids decorated mostly with sialyl-Lewis x (sLex) and sialyl-Lewis a (sLea). While LC has been described as expressing these sialyl Lewis antigens, its functional role in allowing LC adhesion to endothelium is still poorly understood. We analyzed paired tumor and normal tissues samples from non-small cell lung cancer (NSCLC) patients and three LC cell lines. Immunoblotting assays with anti-sLex/sLea and E-selectin chimera demonstrated that LC tumor tissues significantly overexpress E-SL and flow cytometry results indicated that E-SL are also abundantly expressed in LC cell lines. To understand the mechanism behind the overexpression of E-SL in LC tissues and cell lines, we analyzed the expression of genes involved in its biosynthesis, namely FUT3, FUT4, FUT6, FUT7, ST3GAL3, ST3GAL4, ST3GAL6, β4GALT1, GCNT1 and GALNT3. It was observed the overexpression of fucosyltransferases FUT3, FUT6 and FUT7 in LC tumor tissues and FUT3 in LC cell lines, being this last one correlated with an increased reactivity of the LC cells to endothelial selectins. It was described that low expression of FUT4 in tumor tissues is correlated with early stages of NSCLC. We also analyzed scaffolds proteins of sLex/sLea and it was identified the carcinoembryonic antigen as an E-SL in NSCLC. In summary, this thesis contributed to a better understanding of the glycosidic changes and molecules that can influence tumor progression of LC, allowing identifying in the future new diagnosis/prognosis biomarkers and potential therapeutic targets for NSCLC.

Novel antibiotic-loaded orthopaedic bone cements: insights on drug release profiles and biocompatibility

Acrylic bone cement (BC) is widely used as an anchor of artificial joints. Bacterial infection due to biofilm formation and inflammation are common and difficult to treat problems associated with commercial available BC formulations. Research on novel BC compositions is urgently needed. The main objective of this thesis was to develop a new biocompatible antibiotic-loaded BC with improved release profile. To achieve that aim several additives were incorporated, as an antibiotic (levofloxacin) to combat bacterial growth, an anti-inflammatory drug (diclofenac) to decrease the inflammatory process and two well-known and broadly used biopolymers, alginate and chitosan in order to increase matrix porosity, and in this way to intensify the amount of released drug. Novel BC formulations were tested in order to find the most suitable one that had potential to proceed to clinical application. Numerous tests were conducted as: a) evaluation of drug release profiles in different biomimetic media, b) mechanical and surface studies, c) microbiological activity testing against Staphylococcus aureus and d) in vitro biocompatibility assays (fibroblasts and osteoblasts). In general, the addition of biopolymers increased drug release, didn’t compromised BC mechanical properties and increased BC hydrophilicity. Microbiological testing revealed that Lev[BC]Chi was the only matrix that reduced significantly biofilm formation. On the contrary, alginate and diclofenac loading into BC seemed to increase biofilm growth. Biocompatibility studies showed some decrease in cell viability, in particularly on osteoblasts, mainly due to the high amounts of released drugs. In conclusion, the present work has shown that the matrix with more potential to proceed in further investigations was Lev[BC]Chi. Other conditions (namely additives and drugs concentrations) should be evaluated with the other tested BC matrices before being discharged.