Functional role of macrobenthos in estuarine sediment dynamics

Thesis submitted to the Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia for the degree of Doctor of Philosophy in Environmental Engineering

Numerical Method to Predict Void Formation during The Liquid Composite Molding Process

Void formation during the injection phase of the liquid composite molding process can be explained as a consequence of the non-uniformity of the flow front progression. This is due to the dual porosity within the fiber perform (spacing between the fiber tows is much larger than between the fibers within in a tow) and therefore the best explanation can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter of the order of millimeters. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the open spaces between the fiber tows must be considered and the coupling between the flow regimes must be addressed. In such cases, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to illposing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. A numerical procedure was formulated and is implemented in an existing Free Boundary Program to reduce this error significantly.

Geomorphic dam-break flows. Part II: numerical simulation

Proceedings of the Institution of Civil Engineers - Water Management 163 Issue WM6

Acceleration of physics simulation engine through OpenCL

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Transverse Vibrations in Beams Supported by a Piece-Wise Homogeneous Visco- Elastic Foundation

Transversal vibrations induced by a load moving uniformly along an infinite beam resting on a piece-wise homogeneous visco-elastic foundation are studied. Special attention is paid to the additional vibrations, conventionally referred to as transition radiations, which arise as the point load traverses the place of foundation discontinuity. The governing equations of the problem are solved by the normalmode analysis. The solution is expressed in a form of infinite sum of orthogonal natural modes multiplied by the generalized coordinate of displacement. The natural frequencies are obtained numerically exploiting the concept of the global dynamic stiffness matrix. This ensures that the frequencies obtained are exact. The methodology has restrictions neither on velocity nor on damping. The approach looks simple, though, the numerical expression of the results is not straightforward. A general procedure for numerical implementation is presented and verified. To illustrate the utility of the methodology parametric optimization is presented and influence of the load mass is studied. The results obtained have direct application in analysis of railway track vibrations induced by high-speed trains when passing regions with significantly different foundation stiffness.

Heat recovery from wastewater: numerical modelling of sewer systems

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil Engenharia Sanitária

Numerical methods and tangible interfaces for pollutant dispersion simulation

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia do Ambiente, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Long-term behaviour of railway transitions under dynamic loading application to soft soil sites

Dissertação para obtenção do Grau de Doutor em Engenharia Civil

Evolution of Diplodocid Sauropod dinosaurs with emphasis on specimens from Howe Ranch, Wyoming (USA)

Diplodocidae are among the best known sauropod dinosaurs. Several species were described in the late 1800s or early 1900s. Since then, numerous additional specimens were recovered in the USA, Tanzania, Portugal, as well as possibly Spain, England, and Asia. To date, the clade includes about 12 to 15 different species, some of them with questionable taxonomic status (e.g. ‘Diplodocus’ hayi or Dyslocosaurus polyonychius). However, intrageneric relationships of the multi-species, iconic genera Apatosaurus and Diplodocus are still poorly known. The way to resolve this issue is a specimen-based phylogenetic analysis, which was done for Apatosaurus, but is here performed for the first time for the entire clade of Diplodocidae. New material from different localities and stratigraphic levels on the Howe Ranch (Shell,Wyoming, USA) sheds additional light on the evolution of Diplodocidae. Three new specimens are described herein, considerably increasing our knowledge of the anatomy of the group. The new specimens (SMA 0004, SMA 0011, and SMA 0087) represent two, to possibly three new diplodocid species. They preserve material from all parts of the skeleton, including two nearly complete skulls, as well as fairly complete manus and pedes, material which is generally rare in diplodocids. Thereby, they considerably increase anatomical overlap between the sometimes fragmentary holotype specimens of the earlier described diplodocid species, allowing for significant results in a specimenbased phylogenetic analysis. Furthermore, clavicles and interclavicles are identified, the latter for the first time in dinosaurs. Their presence seems restricted to early sauropods, flagellicaudatans, and early Macronaria, and might thus be a retained plesiomorphy, with the loss of these bones being synapomorphic for Titanosauriformes and possibly Rebbachisauridae. The new material allows to test previous hypotheses of diplodocid phylogeny. In order to do so, any type specimen previously proposed to belong to Diplodocidae was included in the study, as are relatively complete referred specimens, in order to increase the degree of overlapping material. For specimens subsequently suggested to be non-diplodocid sauropods, their hypothesized sister taxa were included as outgroups. The current phylogenetic analysis thus includes 76 operational taxonomic units, 45 of which belong to Diplodocidae. The specimens were scored for 477 morphological characters, representing one of the most extensive phylogenetic analyses done within sauropod dinosaurs. The resulting cladogram recovers the classical arrangement of diplodocid relationships. Basing on a newly developed numerical approach to reduce subjectivity in the decision of specific or generic separation, species that have historically been included into well-known genera like Apatosaurus or Diplodocus, were detected to be actually generically different. Thereby, the famous genus Brontosaurus is resuscitated, and evidence further suggests that also Elosaurus parvus (previously referred to Apatosaurus) or ‘Diplodocus’ hayi represent unique genera. The study increases our knowledge about individual variation, and helps to decide how to score multi-species genera. Such a specimen-based phylogenetic analysis thus proves a valuable tool to validate historic species in sauropods, and in paleontology as a whole.

Predictive analytical and numerical modeling for orthogonal cutting

In this thesis, a predictive analytical and numerical modeling approach for the orthogonal cutting process is proposed to calculate temperature distributions and subsequently, forces and stress distributions. The models proposed include a constitutive model for the material being cut based on the work of Weber, a model for the shear plane based on Merchants model, a model describing the contribution of friction based on Zorev’s approach, a model for the effect of wear on the tool based on the work of Waldorf, and a thermal model based on the works of Komanduri and Hou, with a fraction heat partition for a non-uniform distribution of the heat in the interfaces, but extended to encompass a set of contributions to the global temperature rise of chip, tool and work piece. The models proposed in this work, try to avoid from experimental based values or expressions, and simplifying assumptions or suppositions, as much as possible. On a thermo-physical point of view, the results were affected not only by the mechanical or cutting parameters chosen, but also by their coupling effects, instead of the simplifying way of modeling which is to contemplate only the direct effect of the variation of a parameter. The implementation of these models was performed using the MATLAB environment. Since it was possible to find in the literature all the parameters for AISI 1045 and AISI O2, these materials were used to run the simulations in order to avoid arbitrary assumption.

Mathematical and numerical methods for inverse problems using fundamental solutions techniques

Fundação para a Ciência e a Tecnologia - SFRH/BD/27914/2006

Numerical prediction of diffusion and electric field-induced iron nanoparticle transport

Zero valent iron nanoparticles (nZVI) are considered very promising for the remediation of contaminated soils and groundwaters. However, an important issue related to their limited mobility remains unsolved. Direct current can be used to enhance the nanoparticles transport, based on the same principles of electrokinetic remediation. In this work, a generalized physicochemical model was developed and solved numerically to describe the nZVI transport through porous media under electric field, and with different electrolytes (with different ionic strengths). The model consists of the Nernst–Planck coupled system of equations, which accounts for the mass balance of ionic species in a fluid medium, when both the diffusion and electromigration of the ions are considered. The diffusion and electrophoretic transport of the negatively charged nZVI particles were also considered in the system. The contribution of electroosmotic flow to the overall mass transport was included in the model for all cases. The nZVI effective mobility values in the porous medium are very low (10−7–10−4 cm2 V−1 s−1), due to the counterbalance between the positive electroosmotic flow and the electrophoretic transport of the negatively charged nanoparticles. The higher the nZVI concentration is in the matrix, the higher the aggregation; therefore, low concentration of nZVI suspensions must be used for successful field application.

Numerical modelling of compound channel flow

Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/64337/2009 ; projects PTDC/ECM/70652/2006, PTDC/ECM/117660/2010 and RECI/ECM-HID/0371/2012

Evolution of Teeth and Quadrate in Non-avian Theropoda (Dinosauria: Saurischia), with the Description of Torvosaurus Remains from Portugal

Theropods form a highly successful and morphologically diversified group of dinosaurs that gave rise to birds. They include most, if not all, carnivorous dinosaurs, yet many theropod clades were secondarily adapted to piscivory, omnivory and herbivory, and theropods show a large array of skull and dentition morphologies. This work aims to investigate aspects of the evolution of theropod dinosaurs by analyzing in detail both the anatomy and ontogeny of teeth and quadrates in non-avian theropods, and by studying embryonic and adult material of a new species of theropod. A standardized list of terms and notations for each anatomical entity of the tooth, quadrate, and maxilla is here proposed with the goal of facilitating descriptions of these important cranial and dental elements. The distribution of thirty dental characters among 113 theropod taxa is investigated, and a list of diagnostic dental characters is proposed. As an example, four isolated theropod teeth from the Lourinhã Formation (Kimmeridgian‒Tithonian) of Portugal are described and identified based on a cladistic analysis performed on a data matrix of 141 dentition-based characters coded in 60 taxa. Two shed teeth are referred to an abelisaurid, providing the first record of Abelisauridae in the Jurassic of Laurasia and the one of the oldest records of this clade in the world, suggesting a possible radiation of Abelisauridae in Europe well before the Upper Cretaceous. The consensus tree resulting from this phylogenetic analysis, the most extensive on theropod teeth, indicates that theropod teeth provide reliable data for identification at approximately family level, and this method will help identifying theropod teeth with more confidence. A detailed description of the dentition of Megalosauridae is also provided, and a discriminant analysis performed on a dataset of numerical data collected on the teeth of 62 theropod taxa reveals that megalosaurid teeth are hardly distinguishable from other theropod clades with ziphodont dentition. This study highlights the importance of detailing anatomical descriptions and providing additional morphometric data on teeth with the purpose of helping to identify isolated theropod teeth. In order to evaluate the phylogenetic potential and investigate the evolutionary transformations of the quadrate, a phylogenetic morphometric analysis as well as a cladistic analysis using 98 discrete quadrate related characters were conducted. The quadrate morphology by its own provides a wealth of data with strong phylogenetic signal, and the phylogenetic morphometric analysis reveals two main morphotypes of the mandibular articulation of the quadrate linked to function. As an example, six isolated quadrates from the Kem Kem beds (Cenomanian) of Morocco are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, morphometric, and phylogenetic morphometric analyses. Morphofunctional analysis of the spinosaurid mandibular articulation has shown that the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a mediolaterally oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. A new species of theropod from the Lourinhã Formation of Portugal, Torvosaurus gurneyi, is erected based on a right maxilla and an incomplete caudal centrum. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A theropod clutch containing several crushed eggs and embryonic material is also assigned to this new species of Torvosaurus. Investigation on the maxilla ontogeny in basal tetanurans reveals that crown denticles, elongation of the anterior ramus, and fusion of interdental plates appear at a posthatchling stage. On the other hand, maxillary pneumaticity is already present at an embryonic stage in non-avian theropods.

Numerical simulation of blast effects on fibre grout RC panels

The main purpose of the present dissertation is the simulation of the response of fibre grout strengthened RC panels when subjected to blast effects using the Applied Element Method, in order to validate and verify its applicability. Therefore, four experimental models, three of which were strengthened with a cement-based grout, each reinforced by one type of steel reinforcement, were tested against blast effects. After the calibration of the experimental set-up, it was possible to obtain and compare the response to the blast effects of the model without strengthening (reference model), and a fibre grout strengthened RC panel (strengthened model). Afterwards, a numerical model of the reference model was created in the commercial software Extreme Loading for Structures, which is based on the Applied Element Method, and calibrated to the obtained experimental results, namely to the residual displacement obtained by the experimental monitoring system. With the calibration verified, it is possible to assume that the numerical model correctly predicts the response of fibre grout RC panels when subjected to blast effects. In order to verify this assumption, the strengthened model was modelled and subjected to the blast effects of the corresponding experimental set-up. The comparison between the residual and maximum displacements and the bottom surface’s cracking obtained in the experimental and the numerical tests yields a difference of 4 % for the maximum displacements of the reference model, and a difference of 4 and 10 % for the residual and maximum displacements of the strengthened model, respectively. Additionally, the cracking on the bottom surface of the models was similar in both methods. Therefore, one can conclude that the Applied ElementMethod can correctly predict and simulate the response of fibre grout strengthened RC panels when subjected to blast effects.