Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

Hymenoptera.

We present the fi rst review of Hymenoptera alien to Europe. Our study revealed that nearly 300 species of Hymenoptera belonging to 30 families have been introduced to Europe. In terms of alien species diversity within invertebrate orders, this result ranks Hymenoptera third following Coleoptera and Hemiptera. Two third of alien Hymenoptera are parasitoids or hyperparasitoids that were mostly introduced for biological control purposes. Only 35 phytophagous species, 47 predator species and 3 species of pollinators have been introduced. Six families of wasps (Aphelinidae, Encyrtidae, Eulophidae, Braconidae, Torymidae, Pteromalidae) represent together with ants (Formicidae) about 80% of the alien Hymenoptera introduced to Europe. Th e three most diverse families are Aphelinidae (60 species representing 32% of the Aphelinid European fauna), Encyrtidae (55) and Formicidae (42) while the Chalcidoidea together represents 2/3 of the total Hymenoptera species introduced to Europe. Th e fi rst two families are associated with mealybugs, a group that also included numerous aliens to Europe. In addition, they are numerous cases of Hymenoptera introduced from one part of Europe to another, especially from continental Europe to British Islands. Th ese introductions mostly concerned phytophagous or gall- maker species (76 %), less frequently parasitoids. Th e number of new records of alien Hymenoptera per year has shown an exponential increase during the last 200 years. Th e number of alien species introduced by year reached a maximum of 5 species per year between 1975 and 2000. North America provided the greatest part of the hymenopteran species alien to Europe (96 species, 35.3%), followed by Asia (84 species, 30.9%) and Africa (49 species, 18%). Th ree Mediterranean countries (only continental parts) hosted the largest number of alien Hymenoptera: Italy (144 spp.), France (111 spp.) and Spain (90 spp.) but no correlation was found with the area of countries. Intentional introduction, mostly for biological control, has been the main pathway of introduction for Hymenoptera. Consequently, the most invaded habitats are agricultural and horticultural as well as greenhouses. To the contrary, Hymenoptera alien in Europe are mostly associated with woodland and forest habitats. Ecological and economic impacts of alien Hymenoptera have been poorly studied. Ants have probably displaced native species and this is also true for introduced parasitoids that are suspected to displace native parasitoids by competition, but reliable examples are still scarce. Th e cost of these impacts has never been estimated.

Invaded habitats

More than 65% (1040 species) of arthropod species alien to Europe are associated with human-made habitats, especially parks and gardens, human settlements and agricultural lands, whereas woodlands are yet colonized by less than 20% of the alien fauna, which still has a negligible representation in the other natural and semi-natural habitats. Large diff erences in habitat affi nity are observed between alien taxonomic groups. Phytophagous species are predominant among aliens, representing 47.2% of species alien to Europe.

Dielectric study of triton X100: a glass-forming liquid

Dissertação para obtenção do grau de mestre em Engenharia de Materiais

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Magnetotransport properties of metal/LaAlO3/SrTiO3 heterostructures

The quasi two-dimensional electron gas (q2DEG) hosted in the interface of an epitaxially grown lanthanum aluminate (LaAlO3) thin film with a TiO2-termi-nated strontium titanate (SrTiO3) substrate (001) has been massively studied in the last few years. The confinement of mobile electrons to within a few nanome-ters from the interface, superconductive behavior at low temperatures and elec-tron mobility exceeding 1000 cm2/(V.s) make this system an interesting candi-date to explore the physics of spin injection and transport. However, due to the critical thickness for conduction of 4 unit cells (uc) of LaAlO3, a high tunneling resistance hampers electrical access to the q2DEG, preventing proper injection of spin polarized current. Recently, our group found that depositing a thin overlayer of Co on LaAlO3 reduces the critical thickness, enabling conduction with only 1 uc of LaAlO3. Two scenarios arise to explain this phenomenon: a pinning of the Fermi level in the metal, inducing charge transfer in the SrTiO3; the creation of oxygen vacancies at the interface between LaAlO3 and the metal, leading to an n-type doping of the SrTiO3. In this dissertation, we will report on magnetotransport of metal/LaAlO3/SrTiO3 (metal: Ti, Ta, Co, Py, Au, Pt, Pd) heterostructures with 2 uc of LaAlO3 studied at low temperatures (2 K) and high magnetic fields (9 T). We have analyzed the transport properties of the gas, namely, the carrier concen-tration, mobility and magnetotransport regime and we will discuss the results in the light of the two scenarios mentioned above.