4 resultados para Disinfection byproducts
em RUN (Repositório da Universidade Nova de Lisboa) - FCT (Faculdade de Cienecias e Technologia), Universidade Nova de Lisboa (UNL), Portugal
Resumo:
RESUMO - A legionella em meio hospitalar tem sido alvo de preocupação e de várias discussões, sendo esta uma bactéria patogénica que coloniza vários tipos de ambientes aquáticos (naturais e artificiais). Estas bactérias têm a particularidade de se desenvolver em meio aquático mas a infeção apenas é transmitida através de aerossóis de água contaminada, ou seja, por via aérea. Não se transmitindo de pessoa para pessoa. Pelas suas características os sistemas de arrefecimento de ar, nomeadamente as torres de arrefecimento, condensadores evaporativos, humidificadores e sistemas de ar condicionado, são fontes importantes de disseminação da legionella. Assim surge a necessidade da existência de programas de prevenção, que deverão ter em conta uma adequada manutenção, limpeza e desinfeção. Dada a quantidade de frequentadores assim como da especificidade dos mesmos, em meio hospitalar é particularmente importante a eficácia destes sistemas. Ou seja, os sistemas de arrefecimento em hospitais devem, para além de garantir o conforto térmico, ser responsáveis por manter a qualidade do ar e reduzir os riscos existentes a ele associados. O presente estudo pretende conhecer a verdadeira eficácia dos programas de manutenção e vigilância da Legionella, apenas nos sistemas de arrefecimento. Trata-se então de um estudo exploratório, descritivo recolha desta informação in-loco dos sistemas em estudo, de X hospitais da cidade de Lisboa. Na metodologia serão utilizadas grelhas de observação e resultados de colheita de água dos locais de maior risco. A realização deste estudo visa obter um retrato do panorama existente e contribuir para o início de novos estudos epidemiológicos.
Resumo:
Dissertation for the Degree of Master in Biotechnology
Resumo:
This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)
Resumo:
There is a rising demand for local food which traveled only short distances and is marketed directly by the producer. With growing importance of local food also the amount of literature in this field increased. Yet, literature is lacking to examine the challenges and burdens consumers face while trying to purchase local food. Evidence is shown that a gap exists between the intention of consumers who would like to purchase local food and their actual behavior. However, reasons for this gap are only discovered as byproducts of other research objectives. Consequently, this study investigates the specific reasons for the intention-behavior gap of consumers in the local food market. The study makes use of semi-structured face-to-face interviews with rural and urban respondents. The interviews are analyzed by qualitative content analysis based on Elo and Kyngäs (2008). Revealed key drivers for the intention-behavior gap are (1) the lack of awareness where to purchase local food products, (2) the limited reachability of local food producers, (3) the assortment of the local producer in regard to size and composition and (4) the lack in transparency of the prices of local food. Consequently, it is the producers turn to eliminate the revealed barriers by proactively bringing their products closer to the consumer.