Assessing initial embodied energy in building structures using LCA methodology

The considerable amount of energy consumed on Earth is a major cause for not achieving sustainable development. Buildings are responsible for the highest worldwide energy consumption, nearly 40%. Strong efforts have been made in what concerns the reduction of buildings operational energy (heating, hot water, ventilation, electricity), since operational energy is so far the highest energy component in a building life cycle. However, as operational energy is being reduced the embodied energy increases. One of the building elements responsible for higher embodied energy consumption is the building structural system. Therefore, the present work is going to study part of embodied energy (initial embodied energy) in building structures using a life cycle assessment methodology, in order to contribute for a greater understanding of embodied energy in buildings structural systems. Initial embodied energy is estimated for a building structure by varying the span and the structural material type. The results are analysed and compared for different stages, and some conclusions are drawn. At the end of this work it was possible to conclude that the building span does not have considerable influence in embodied energy consumption of building structures. However, the structural material type has influence in the overall energetic performance. In fact, with this research it was possible that building structure that requires more initial embodied energy is the steel structure; then the glued laminated timber structure; and finally the concrete structure.

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Anomaly diagnosis in ceramic claddings by thermography - A review

With the increasing importance given to building rehabilitation comes the need to create simple, fast and non-destructive testing methods (NDT) to identify problems and for anomaly diagnosis. Ceramic tiles are one of the most typical kinds of exterior wall cladding in several countries; the earliest known examples are Egyptian dating from 4000 BC. This type of building facade coating, though being quite often used in due to its aesthetic and architectural characteristics, is one of the most complex that can be applied given the several parts from which it is composed; hence, it is also one of the most difficult to correctly diagnose with expeditious methods. The detachment of ceramic wall tiles is probably the most common and difficult to identify anomaly associated with this kind of cladding and it is also definitely the one that can compromise security the most. Thus, it is necessary to study a process of inspection more efficient and economic than the currently used which often consist in semi-destructive methods (the most common is the pull off test), that can only be used in a small part of the building at a time, allowing some assumptions of what can the rest of the cladding be like. Infrared thermography (IRT) is a NDT with a wide variety of applications in building inspection that is becoming commonly used to identify anomalies related with thermal variations in the inspected surfaces. Few authors have studied the application of IRT in anomalies associated with ceramic claddings claiming that the presence of air or water beneath the superficial layer will influence the heat transfer in a way that can be detected in both a qualitative and a quantitative way by the thermal camera, providing information about the state of the wall in a much broad area per trial than other methods commonly used nowadays. This article intends to present a review of the state of art of this NDT and its potentiality in becoming a more efficient way to diagnose anomalies in ceramic wall claddings.

Travestis brasileiras em Portugal : percursos, identidades e ambiguidades

Os séculos XX e XXI corresponderam ao agudizar de processos globalizantes potenciados pelas novas tecnologias, quer no âmbito comunicacional, quer industrial, sublinhando dinâmicas de desruralização e de construção de tecidos urbanos densos onde o anonimato se tornou possível na vivência de experiências, outrora reconduzidas ao silêncio do sujeito socialmente isolado. A diferença, enquanto experiência vivida, tornou-se comunitariamente possível, surgindo grupos que delimitam geograficamente determinadas áreas urbanas a que correspondem afinidades eróticas ou de práticas sexuais, inicialmente de gays e lésbicas. Quebra-se na prática a uni-direccionalidade entre sexo e género, entre sexo e sexualidade, questionando-se esquemas de relações assimétricas e modelos de pensamento enraizados (heterossexualidade, patriarcado, machismo, etc.). Rubin (1975 in Lewin 2006, in Vance, 1984) propõe a existência de dois sistemas diferenciados de sexo e género que tornam plausível, sob o ponto de vista analítico, a não correspondência entre sexo, género e sexualidade. O paradigma máximo desta autonomia sistémica alcança-se na construção de uma identidade travesti. Esta identidade mutante, mutável e instável parece acompanhar um mundo de fluxos intensos e interdependências múltiplas. É na sociedade global que as travestis encontram espaço para a vivência comunitária da sua experiência, constituindo-se como um grupo com práticas transnacionais, marcado pela mobilidade de género e geográfica, primeiramente dentro das fronteiras brasileiras e depois para a Europa. Cidade, prostituição e migração surgem como factores chave da disseminação geográfica e identitária desta comunidade. Este projecto tomado sob uma perspectiva global mantêm ou reinventa relações com a estrutura, que aparentemente as apaga enquanto actores sociais e da qual, aparentemente, se auto-excluem.