A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

Groundwater quality, vulnerability and potential assessment in Kobo Valley development project, Ethiopia

This study deals with investigating the groundwater quality for irrigation purpose, the vulnerability of the aquifer system to pollution and also the aquifer potential for sustainable water resources development in Kobo Valley development project. The groundwater quality is evaluated up on predicting the best possible distribution of hydrogeochemicals using geostatistical method and comparing them with the water quality guidelines given for the purpose of irrigation. The hydro geochemical parameters considered are SAR, EC, TDS, Cl-, Na+, Ca++, SO4 2- and HCO3 -. The spatial variability map reveals that these parameters falls under safe, moderate and severe or increasing problems. In order to present it clearly, the aggregated Water Quality Index (WQI) map is constructed using Weighted Arithmetic Mean method. It is found that Kobo-Gerbi sub basin is suffered from bad water quality for the irrigation purpose. Waja Golesha sub-basin has moderate and Hormat Golena is the better sub basin in terms of water quality. The groundwater vulnerability assessment of the study area is made using the GOD rating system. It is found that the whole area is experiencing moderate to high risk of vulnerability and it is a good warning for proper management of the resource. The high risks of vulnerability are noticed in Hormat Golena and Waja Golesha sub basins. The aquifer potential of the study area is obtained using weighted overlay analysis and 73.3% of the total area is a good site for future water well development. The rest 26.7% of the area is not considered as a good site for spotting groundwater wells. Most of this area fall under Kobo-Gerbi sub basin.

An integrated approach to Physcomitrella patens transcriptomics reveals importantclues of the evolutionary development of plant organs and sexual reproduction

Land plant evolution required the generation of a new body plan that could resist the harsher and fluctuating environmental conditions found outside of aquatic environments. Unraveling the genetic basis of plant developmental innovations is not only revealing in terms of an evolutionary point of view, but it is also important for understanding the emergence of agronomically important traits. Comparative genetic studies between basal and modern land plants, both at the genome and trancriptome levels, can help in the generation of hypotheses related to the genetic basis of plant evolutionary development.(...)

Support in decision-making under uncertainty: a project risk assessment tool development and supplementary advances

A foremost dispute that persists on the contemporary world’s agenda is change. The on-going social/technological/economic changes create a competitive and challenging environment for companies to endure. To benefit from these changes, world economies partially depend on emerging Small and Medium Enterprises (SMEs) and their adaptability skills, and subsequently the development of an integrated capability to innovate has become the prime strategy for most of SMEs to subsist and grow. However, innovation and change are always somewhat bonded to an inherent risk development, which subsequently brings on the necessity of a revision of risk management approaches in innovative processes, whose importance SMEs tend to disregard. Additionally, little efforts have been made to improve and create empirical models, metrics and tools to assist SMEs managing latent risks in their innovative projects. This work seeks to present and discuss a solution to support SMEs in engaging on systematic risk management practices, which consists on an integrated risk assessment and response support web-based tool - Spotrisk® - designed for SMEs. On the other hand, an inherent subjectivity is linked with risk management and identification processes, due to uncertainty trait of its nature, for each individual perceives situations according to his own idiosyncrasy, which brings complications in normalizing risk profiles and procedures. This essay aims to bring insights concerning the support in decision-making processes under uncertainty, by addressing issues related with the risk behavior character among individuals. To address such issues, subjects of neuroscience or psychology are explored and models to identify such character are proposed, as well as models to improve presented tool. This work attempts to go beyond the restrictive aim of endeavoring on technical improvement dissertation, and in embraces an exploratory conceptualization concerning micro, small and medium businesses’ traits regarding risk characters and project risk assessment tools.

Development of 3D in vitro models for prediction of hepatic metabolism and toxicity

The development of human cell models that recapitulate hepatic functionality allows the study of metabolic pathways involved in toxicity and disease. The increased biological relevance, cost-effectiveness and high-throughput of cell models can contribute to increase the efficiency of drug development in the pharmaceutical industry. Recapitulation of liver functionality in vitro requires the development of advanced culture strategies to mimic in vivo complexity, such as 3D culture, co-cultures or biomaterials. However, complex 3D models are typically associated with poor robustness, limited scalability and compatibility with screening methods. In this work, several strategies were used to develop highly functional and reproducible spheroid-based in vitro models of human hepatocytes and HepaRG cells using stirred culture systems. In chapter 2, the isolation of human hepatocytes from resected liver tissue was implemented and a liver tissue perfusion method was optimized towards the improvement of hepatocyte isolation and aggregation efficiency, resulting in an isolation protocol compatible with 3D culture. In chapter 3, human hepatocytes were co-cultivated with mesenchymal stem cells (MSC) and the phenotype of both cell types was characterized, showing that MSC acquire a supportive stromal function and hepatocytes retain differentiated hepatic functions, stability of drug metabolism enzymes and higher viability in co-cultures. In chapter 4, a 3D alginate microencapsulation strategy for the differentiation of HepaRG cells was evaluated and compared with the standard 2D DMSO-dependent differentiation, yielding higher differentiation efficiency, comparable levels of drug metabolism activity and significantly improved biosynthetic activity. The work developed in this thesis provides novel strategies for 3D culture of human hepatic cell models, which are reproducible, scalable and compatible with screening platforms. The phenotypic and functional characterization of the in vitro systems performed contributes to the state of the art of human hepatic cell models and can be applied to the improvement of pre-clinical drug development efficiency of the process, model disease and ultimately, development of cell-based therapeutic strategies for liver failure.

A consumer research project as the basis for the development of a marketing plan for a new spirit brand producing gin in Germany

This work project is about developing a marketing plan for a new gin brand in Germany. It is based on consumer and market research, including Portugal as a trend market for the qualitative research. For the undertaking it is seen as fundamental to understand the industry as well as the consumer needs, attitudes and preferences. Furthermore, it is important to consider the estimation of opinion leaders and trendsetters in the industry. In this context it turned out that barkeepers have a key-influencing role for the stimulation of demand. Based on the insights from this research as well as on the gained market knowledge, the marketing plan was developed. The goal is to convince other brand users to switch brands.

Development of a fundus camera for analysis of photoreceptor directionality in the healthy retina

The Stiles-Crawford effect (SCE) is the well-known phenomenon in which the brightness of light perceived by the human eye depends upon its entrance point in the pupil. This physiological characteristic is due to the directional sensitivity of the cone photoreceptors in the retina and it displays an approximately Gaussian dependency which is altered in a number of pathologies. Retinal imaging, a widely spread clinical practice, may be used to evaluate the SCE and thus serve as diagnostic tool. Nonetheless, its use for such a purpose is still underdeveloped and far from the clinical reality. In this project a fundus camera was built and used to assess the cone photoreceptor directionality by reflective imaging of the retina in healthy individuals. The physical and physiological implications of its development are addressed in detail in the text: the optical properties of the human eye, illumination issues, acquiring a retinal image formed by the eye, among others. A full description of the developmental process that led to the final measuring method and results is also given. The developed setup was successfully used to obtain high quality images of the eye fundus and in particular the parafoveal cone photoreceptors. The SCE was successfully observed and characterized. Even though considerable improvements could be done to the measurement method, the project showed the feasibility of using retinal imaging to evaluate the SCE thus motivating its usage in a clinical environment.

Fostering e-participation sustainability through a BPM-driven semantic model

According to a recent Eurobarometer survey (2014), 68% of Europeans tend not to trust national governments. As the increasing alienation of citizens from politics endangers democracy and welfare, governments, practitioners and researchers look for innovative means to engage citizens in policy matters. One of the measures intended to overcome the so-called democratic deficit is the promotion of civic participation. Digital media proliferation offers a set of novel characteristics related to interactivity, ubiquitous connectivity, social networking and inclusiveness that enable new forms of societal-wide collaboration with a potential impact on leveraging participative democracy. Following this trend, e-Participation is an emerging research area that consists in the use of Information and Communication Technologies to mediate and transform the relations among citizens and governments towards increasing citizens’ participation in public decision-making. However, despite the widespread efforts to implement e-Participation through research programs, new technologies and projects, exhaustive studies on the achieved outcomes reveal that it has not yet been successfully incorporated in institutional politics. Given the problems underlying e-Participation implementation, the present research suggested that, rather than project-oriented efforts, the cornerstone for successfully implementing e-Participation in public institutions as a sustainable added-value activity is a systematic organisational planning, embodying the principles of open-governance and open-engagement. It further suggested that BPM, as a management discipline, can act as a catalyst to enable the desired transformations towards value creation throughout the policy-making cycle, including political, organisational and, ultimately, citizen value. Following these findings, the primary objective of this research was to provide an instrumental model to foster e-Participation sustainability across Government and Public Administration towards a participatory, inclusive, collaborative and deliberative democracy. The developed artefact, consisting in an e-Participation Organisational Semantic Model (ePOSM) underpinned by a BPM-steered approach, introduces this vision. This approach to e-Participation was modelled through a semi-formal lightweight ontology stack structured in four sub-ontologies, namely e-Participation Strategy, Organisational Units, Functions and Roles. The ePOSM facilitates e-Participation sustainability by: (1) Promoting a common and cross-functional understanding of the concepts underlying e-Participation implementation and of their articulation that bridges the gap between technical and non-technical users; (2) Providing an organisational model which allows a centralised and consistent roll-out of strategy-driven e-Participation initiatives, supported by operational units dedicated to the execution of transformation projects and participatory processes; (3) Providing a standardised organisational structure, goals, functions and roles related to e-Participation processes that enhances process-level interoperability among government agencies; (4) Providing a representation usable in software development for business processes’ automation, which allows advanced querying using a reasoner or inference engine to retrieve concrete and specific information about the e-Participation processes in place. An evaluation of the achieved outcomes, as well a comparative analysis with existent models, suggested that this innovative approach tackling the organisational planning dimension can constitute a stepping stone to harness e-Participation value.

Development and application of NMR techniques to study water-in-CO2 microemulsions

Self-assembly is a phenomenon that occurs frequently throughout the universe. In this work, two self-assembling systems were studied: the formation of reverse micelles in isooctane and in supercritical CO2 (scCO2), and the formation of gels in organic solvents. The goal was the physicochemical study of these systems and the development of an NMR methodology to study them. In this work, AOT was used as a model molecule both to comprehensively study a widely researched system water/AOT/isooctane at different water concentrations and to assess its aggregation in supercritical carbon dioxide at different pressures. In order to do so an NMR methodology was devised, in which it was possible to accurately determine hydrodynamic radius of the micelle (in agreement with DLS measurements) using diffusion ordered spectroscopy (DOSY), the micellar stability and its dynamics. This was mostly assessed by 1H NMR relaxation studies, which allowed to determine correlation times and size of correlating water molecules, which are in agreement with the size of the shell that interacts with the micellar layer. The encapsulation of differently-sized carbohydrates was also studied and allowed to understand the dynamics and stability of the aggregates in such conditions. A W/CO2 microemulsion was prepared using AOT and water in scCO2, with ethanol as cosurfactant. The behaviour of the components of the system at different pressures was assessed and it is likely that above 130 bar reverse microemulsions were achieved. The homogeneity of the system was also determined by NMR. The formation of the gel network by two small molecular organogelators in toluene-d8 was studied by DOSY. A methodology using One-shot DOSY to perform the spectra was designed and applied with success. This yielded an understanding about the role of the solvent and gelator in the aggregation process, as an estimation of the time of gelation.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

Primary cilia and the regulation of hedgehog signaling: link to cardiac development

RESUMO: As células eucarióticas evoluíram um sistema de sinalização complexo que lhes permite responder aos sinais extracelulares e intracelulares. Desta forma, as vias de sinalização são essenciais para a sobrevivência da célula e do organismo, uma vez que regulam processos fundamentais, tais como o desenvolvimento, o crescimento, a imunidade, e a homeostase dos tecidos. A via de transdução de sinal Hedgehog (Hh) envolve o receptor Patched1 (Ptch1), que tem um efeito inibidor sobre a proteína Smoothened (Smo) na ausência dos seus ligandos, as proteínas Sonic hedgehog (Shh). Estas proteínas são reguladores fundamentais do desenvolvimento embrionário, como ilustrado pelas malformações drásticas observadas em embriões humanos e de murganho com perturbações da transdução de sinal da via Hh e que incluem polidactilia, defeitos craniofaciais e malformações ósseas. Igualmente importantes são as consequências da ativação inapropriada da via de sinalização Hh na formação de tumores. Curiosamente, os componentes desta via localizam-se nos cílios primários. Além disso, demonstrou-se que esta localização é crucial para a sinalização através da via Hh. Na presença dos ligandos, Ptch1 é internalizado e destinado a degradação ou sequestrado num compartimento da célula de onde não pode desempenhar o seu papel inibitório. A proteína Arl13b é uma pequena GTPase pertencente à família Arf/Arl da superfamília Ras de pequenas GTPases e foi implicada no síndrome de Joubert, uma ciliopatia caracterizada por ataxia congénita cerebelar, hipotonia, atrso mental e cardiopatia congénita. Murganhos deficientes para Arl13b, chamado hennin (hnn) morrem morrem prematuramente ao dia 13,5 de gestação (E13,5) e exibem anomalias morfológicas nos cílios que levam à interrupção da sinalização Hh. Além disso, a Arl13b está diretamente envolvida na regulação da via Hh, controlando a localização de vários componentes desta via nos cílios primários. Neste trabalho, mostramos que a Arl13b se localiza em circular dorsal ruffles (CDRs), que são estruturas de actina envolvidas em macropinocitose e internalização de recetores, e que regula a sua formação. Além disso, aprofundámos o conhecimento do processo de ativação da via de sinalização Hh, mostrando que as CDRs sequestram seletivamente e internalizam o recetor Ptch1. As CDRs formam-se minutos após ativação da via por ligandos Shh ou pelo agonista de Smo SAG e continuam a ser formadas a partir daí, sugerindo uma indução contínua da reorganização do citoesqueleto de actina quando a via está ativada. Observámos ainda que a inibição da formação de CDRs através do silenciamento de WAVE1, uma proteína necessária para a formação destas estruturas, resulta na diminuição da ativação da via de sinalização Hh. Além disso, o bloqueio da macropinocitose, que se segue ao fecho das CDRs, através do silenciamento de uma proteína necessária para a cisão de macropinossomas, nomeadamente a proteína BARS, tem um efeito semelhante. Estes resultados sugerem que as CDRs e a macropinocitose são necessárias para a ativação da via de sinalização Hh e indicam que esta via de internalização controla os níveis de sinal Hh. Durante o desenvolvimento, as células proliferativas dependem do cílio primário para a transdução de várias vias de sinalização. A via Hh induz a diferenciação do músculo cardíaco. Por conseguinte, os murganhos deficientes na via de sinalização Hh exibem uma variedade de defeitos de lateralidade, incluindo alteração do looping do coração, como pode ser visto em murganhos deficientes para Arl13b. Por conseguinte, investigámos o papel da Arl13b no desenvolvimento do coração. Mostramos que a Arl13b é altamente expressa no coração de embriões de murganho e de murganhos adultos ao nível do mRNA e da proteína. Além disso, o perfil de distribuição da Arl13b no coração segue o dos cílios primários, que são essenciais para o desenvolvimento cardíaco. Corações de murganhos hnn no estadio E12,5 mostram um canal átrio-ventricular aberto, espessamento da camada compacta ventricular e aumento do índice mitótico no ventrículo esquerdo. Além disso, um atraso de 1 a 2 dias no desenvolvimento é observado em corações de murganhos hnn, quando comparados com controlos selvagens no estadio E13,5. Assim, estes resultados sugerem que a Arl13b é necessária para o desenvolvimento embrionário do coração e que defeitos cardíacos podem contribuir para a letalidade embrionária de murganhos hnn. Em suma, foi estabelecido um novo mecanismo para a regulação dos níveis de superfície do recetor Ptch1, que envolve a remodelação do citoesqueleto de actina e a formação de CDRs após a ativação da via de sinalização Hh. Este mecanismo permite um feedback negativo que evita a repressão excessiva da via através da remoção de Ptch1 da superfície da célula. Além disso, determinou-se que uma mutação de perda de função na Arl13b causa defeitos cardíacos durante o desenvolvimento, possivelmente relacionados com a associação dos defeitos em cílios primários e na sinalização Hh, existentes em murganhos deficientes para Arl13b. A via de sinalização Hh tem tido um papel central entre as vias de sinalização, uma vez que a sua regulação é crucial para o funcionamento apropriada da célula. Assim, a descoberta de um novo mecanismo de tráfego através de macropinocitose e CDRs que controla a ativação e repressão da via de sinalização Hh traz novas perspetivas de como esta via pode ser regulada e pode ainda conduzir à identificação de novos alvos e estratégias terapêuticas. --------------------ABSTRACT: Eukaryotic cells have evolved a complex signaling system that allows them to respond to extracellular and intracellular cues. Signaling pathways are essential for cell and organism survival, since they regulate fundamental processes such as development, growth, immunity, and tissue homeostasis. The Hedgehog (Hh) pathway of signal transduction involves the receptor Patched1 (Ptch1), which has an inhibitory effect on Smoothened (Smo) in the absence of its ligands, the Sonic hedgehog (Shh) proteins. These proteins are fundamental regulators of embryonic development, as illustrated by the dramatic malformations seen in human and mouse embryos with perturbed Hh signal transduction that include polydactyly, craniofacial defects and skeletal malformations. Equally important are the consequences of inappropriate activation of the Hh signaling response in tumor formation. Interestingly, the components of this pathway localize to primary cilia. Moreover, it has been shown that this localization is crucial for Hh signaling. However, in the presence of the ligands, Ptch1 is internalized and destined for degradation or sequestered in a cell compartment where it no longer can play its inhibitory role. ADP-ribosylation factor-like (Arl) 13b, a small GTPase belonging to Arf/Arl family of the Ras superfamily of small GTPases has been implicated in Joubert syndrome, a ciliopathy characterized by congenital cerebellar ataxia, hypotonia, intellectual disability and congenital heart disease. Arl13b-deficient mice, called hennin (hnn) die at embryonic day 13.5 (E13.5) and display morphological abnormalities in primary cilia that lead to the disruption of Hh signaling. Furthermore, Arl13b is directly involved in the regulation of Hh signaling by controlling the localization of several components of this pathway to primary cilia. Here, we show that Arl13b localizes to and regulates the formation of circular dorsal rufles (CDRs), which are actin-basedstructures known to be involved in macropinocytosis and receptor internalization. Additionally, we extended the knowledge of the Hh signaling activation process by showing that CDRs selectively sequester and internalize Ptch1 receptors. CDRs are formed minutes after Hh activation by Shh ligands or the Smo agonist SAG and keep being formed thereafter, suggesting a continuous induction of actin reorganization when the pathway is switched on. Importantly, we observed that disruption of CDRs by silencing WAVE1, a protein required for CDR formation, results in down-regulation of Hh signaling activation. Moreover, the blockade of macropinocytosis, which follows CDR closure, through silencing of a protein necessary for the fission of macropinosomes, namely BARS has a similar effect. These results suggest that CDRs and macropinocytosis are necessary for activation of Hh signaling and indicate that this pathway of internalization controls Hh signal levels. During development, proliferating cells rely on the primary cilium for the transduction of several signaling pathways. Hh induces the differentiation of cardiac muscle. Accordingly, Hh-deficient mice display a variety of laterality defects, including alteration of heart looping, as seen in Arl13b-deficient mice. Therefore, we investigated the role of Arl13b in heart development. We show that Arl13b is highly expressed in the heart of both embryonic and adult mice at mRNA and protein levels. Also, Arl13b localization profile mimics that of primary cilia, which have been shown to be essential to early heart development. E12.5 hnn hearts show an open atrioventricular channel, increased thickening of the ventricular compact layer and increased mitotic index in the left ventricle. Moreover, a delay of 1 to 2 days in development is observed in hnn hearts, when compared to wild-type controls at E13.5. Hence, these results suggest that Arl13b is necessary for embryonic heart development and that cardiac defects might contribute to the embryonic lethality of hnn mice. Altogether, we established a novel mechanism for the regulation of Ptch1 surface levels, involving cytoskeleton remodeling and CDR formation upon Hh signaling activation. This mechanism allows a negative feedback loop that prevents excessive repression of the pathway by removing Ptch1 from the cell surface. Additionally, we determined that the Arl13b loss-offunction mutation causes cardiac defects during development, possibly related to the associated ciliary and Hh signaling defects found in Arl13b-deficient mice. Hh signaling has taken a center stage among the signaling pathways since its regulation is crucial for the appropriate output and function of the cell. Hence, the finding of a novel trafficking mechanism through CDRs and macropinocytosis that controls Hh signaling activation and repression brings new insights to how this pathway can be regulated and can lead to the discovery of novel therapeutic targets and strategies.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Semantic relations extraction from unstructured information for domain ontologies enrichment

Based in internet growth, through semantic web, together with communication speed improvement and fast development of storage device sizes, data and information volume rises considerably every day. Because of this, in the last few years there has been a growing interest in structures for formal representation with suitable characteristics, such as the possibility to organize data and information, as well as the reuse of its contents aimed for the generation of new knowledge. Controlled Vocabulary, specifically Ontologies, present themselves in the lead as one of such structures of representation with high potential. Not only allow for data representation, as well as the reuse of such data for knowledge extraction, coupled with its subsequent storage through not so complex formalisms. However, for the purpose of assuring that ontology knowledge is always up to date, they need maintenance. Ontology Learning is an area which studies the details of update and maintenance of ontologies. It is worth noting that relevant literature already presents first results on automatic maintenance of ontologies, but still in a very early stage. Human-based processes are still the current way to update and maintain an ontology, which turns this into a cumbersome task. The generation of new knowledge aimed for ontology growth can be done based in Data Mining techniques, which is an area that studies techniques for data processing, pattern discovery and knowledge extraction in IT systems. This work aims at proposing a novel semi-automatic method for knowledge extraction from unstructured data sources, using Data Mining techniques, namely through pattern discovery, focused in improving the precision of concept and its semantic relations present in an ontology. In order to verify the applicability of the proposed method, a proof of concept was developed, presenting its results, which were applied in building and construction sector.