Product extension services deployment platform

Due to the progresses made in the branch of embedded technologies, manufacturers are becoming able to pack their shop floor level manufacturing resources with even more complex functionalities. This technological progression is radically changing the way production systems are designed and deployed, as well as, monitored and controlled. The dissemination of smart devices inside production processes confers new visibility on the production system while enabling for a more efficient and effective management of the operations. By turning the current manufacturing resources functionalities into services based on a Service Oriented Architecture (SOA), in order to expose them as a service to the user, the binomial manufacturing resource/service will push the entire manufacturing enterprise visibility to another level while enabling the global optimization of the operations and processes of a production system while, at the same time, supporting its accommodation to the operational spike easily and with reduced impact on production. The present work implements a Cloud Manufacturing infrastructure for achieving the resource/service value-added i.e. to facilitate the creation of services that are the composition of currently available atomic services. In this context, manufacturing resource virtualization (i.e. formalization of resources capabilities into services accessible inside and outside the enterprise) and semantic representation/description are the pillars for achieving resource service composition. In conclusion, the present work aims to act on the manufacturing resource layer where physical resources and shop floor capabilities are going to be provided to the user as a SaaS (Software as a Service) and/or IaaS (Infrastructure as a Service).

User-centric product derivation in software product lines

Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.

Estudo da distribuição das espécies invasoras Hydrangea macrophylla e Agapanthus praecox nas estradas, levadas e veredas no Parque Natural da Madeira, com vista ao seu controlo

A elaboração desta Dissertação tem como fator relevante a presença de duas espécies exóticas, com caráter invasor, dentro do limite do Parque Natural da Madeira, área protegida que inclui o Património da Humanidade (UNESCO), a Floresta Laurissilva. Foram efetuados levantamentos de campo para o estudo da distribuição de Agapanthus praecox e Hydrangea macrophylla, espécies exóticas invasoras, ao longo de diferentes percursos e determinação dos parâmetros do meio propiciadores à sua dispersão e expansão. Estes levantamentos foram efetuados nos três concelhos em que a presença da Floresta Laurissilva é mais significativa (Porto Moniz, São Vicente e Santana), estando todos eles localizados no Norte da ilha da Madeira. A presença destas espécies em zonas protegidas pode ter impactes extremamente negativos, podendo colocar em risco a sobrevivência das espécies nativas, algumas delas extremamente raras. Desta forma, os levantamentos foram efetuados em estradas, veredas e levadas, de modo a determinar a localização dos núcleos destas invasoras e posteriormente elaborar mapas que permitam, num Sistema de Informação Geográfica, explicar a distribuição, em conjunto com parâmetros ambientais. Estas espécies deverão ter sido introduzidas intencionalmente, dada a localização dos núcleos estar frequentemente próxima de habitações ou de locais com forte influência humana, com atividades como a agricultura e o pastoreio. Este estudo revela uma presença mais significativa da espécie Agapanthus praecox, em relação à espécie Hydrangea macrohylla, notando-se que as zonas consideradas como reservas naturais ou áreas protegidas não se encontram tão afetadas. Foi estudada a relação entre a radiação, altitude, declive, precipitação média anual e temperatura e a distribuição das espécies invasoras em estudo, mas não foi detetado nenhum padrão, pelo que os resultados se revelaram inconclusivos. No entanto, estes dados ambientais não possuíam uma resolução tão fina com a dos dados de campo, pelo que no futuro será de explorar estas relações mas com dados ambientais a uma maior escala. O plano de gestão apresentado para o controlo das espécies invasoras poderá servir de guia para que as ações a desenvolver sejam atempadas, de modo a evitar atuar apenas quando a situação já se encontra descontrolada.

Influência do óxido de grafeno em argamassas de cal hidráulica natural

A área da Nanotecnologia tem sofrido uma grande evolução nos últimos anos, estando a esta associado o desenvolvimento de novos nanomateriais com a potencialidade de serem aplicados em áreas diversas, otimizando os respetivos produtos. Um dos nanomateriais que tem sido recentemente alvo de estudo no setor da construção é o óxido de grafeno (GO), por possuir elevada superfície específica, ser facilmente disperso em água e, em estudos efetuados, demonstrar contribuir para o aumento das propriedades mecânicas dos produtos cimentícios onde tem sido aplicado. O presente trabalho procura avaliar as vantagens da introdução do GO em materiais de construção, com o objetivo de perceber quais os contributos já detetados da aplicação deste nanomaterial no referido setor. Um outro objetivo foi o de avaliar o contributo que o GO pode ter quando aplicado em argamassas de cal hidráulica natural. Para tal procedeu-se à realização de uma campanha experimental, onde foram produzidas argamassas à base de cal hidráulica natural NHL3.5 com diferentes dosagens de GO (0,05%, 0,1%, 0,5% e 1% em função da massa da cal). O GO foi aplicado na amassadura disperso ou diretamente em pó, por forma a avaliar a influência nas características das argamassas. A utilização da NHL3.5 tem em vista colmatar uma lacuna existente no estudo do GO e, por outro lado, justifica-se por conduzir a argamassas não só compatíveis com as características de edifícios recentes, mas também aptas para aplicação como argamassas de substituição em edifícios antigos. Na campanha experimental estudaram-se as características microestruturais das argamassas, as propriedades mecânicas, o comportamento face à ação da água e o desempenho térmico. Os resultados obtidos foram pouco significativos, independentemente da forma como foi adicionado o GO. Concluiu-se que as dosagens de GO utilizadas na campanha experimental não foram as mais adequadas para avaliar a influência deste produto em argamassas de cal hidráulica natural NHL3.5 ou que, independentemente dessa dosagem, esta adição não é muito relevante para otimizar as características analisadas neste tipo de argamassas. No entanto, a adição de baixas dosagens de GO disperso (0,05% e 0,1%) parece conduzir a uma ligeira melhoria das características mecânicas e físicas, quando em comparação com as argamassas de referência.

Argamassas de cal hidráulica natural NHL3.5 com metacaulino – Caracterização após três anos em cura laboratorial e marítima

A presente dissertação enquadra-se num estudo que esteve inserido nos projetos FCT-METACAL e FCT-LIMECONTECH, e cujos resultados foram já parcialmente publicados por GRILO et al. (2014a e 2014b). Nesse estudo produziram-se e caraterizaram-se, aos 28, 90 e 180 dias, argamassas de cal hidráulica natural, NHL3.5 produzida em Portugal, com substituições percentuais de ligante por metacaulino (Mk). Outro fator estudado foi a influência do tipo de cura, estando as amostras das argamassas sujeitas a 3 tipos de cura diferentes: standard, marítima e húmida. Aos 180 dias de cura, as argamassas com 10% de substituição de Mk apresentaram melhorias nas resistências mecânicas e melhorias evidentes no comportamento em relação à absorção de água e secagem. No geral as características das argamassas indiciavam a sua adequação para a conservação de fachadas de edifícios antigos e aplicação na reabilitação de edifícios com suportes mais resistentes ou mesmo em construção nova. No presente estudo foram caracterizadas as mesmas argamassas, desta feita com 3 anos de idade, e avaliada a evolução das suas caraterísticas até esta idade em cura marítima e húmida. Ao contrário do previsto, as resistências mecânicas das argamassas com substituição de metacaulino tiveram reduções nos seus valores, chegando, em alguns casos, a ficar abaixo dos valores das argamassas sem Mk. Pela caracterização química e mineralógica constata-se que essa redução foi motivada pela instabilidade dos compostos pozolânicos formados pelo Mk, embora esses compostos tenham sido os responsáveis pelas elevadas resistências mecânicas registadas a idades jovens. As argamassas com Mk apresentaram um melhor comportamento à água, devido ao refinamento da sua estrutura porosa. Dos ensaios realizados apenas o índice de secagem e o ensaio de resistência aos sais revelaram resultados piores nas argamassas com Mk, quando em comparação com as argamassas de referência, só com NHL. Em relação ao tipo de cura, verificou-se não existirem grandes diferenças entre a cura húmida e a marítima.

Natural hydraulic lime (nhl3.5) mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. In this study scrap tire rubber was used as additional aggregate of mortars based on natural hydraulic lime NHL 3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained directly from industry and separated fine, medium and coarse fractions; 0 %, 18 %, 36 % and 54 % of the weight of binder, corresponding to 2.5 %, 5 % and 7.5 % of the weight of sand. As mortars based on NHL specifications became stricter with the current version of EN 459–1:2015, the influence of the rubber’s additions on the mortars’ fresh state, mechanical and physical performance is presented in this work: flow table consistency, water retention, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity are studied. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Photochemical synthesis and functional transformations of bicyclic vinyl aziridines

Aziridines, a class of organic compounds containing a three membered heterocycle with a nitrogen atom, are extremely valuable molecules in organic and medicinal chemistry. They are frequently used as versatile precursors in the synthesis of natural products, and many biologically active molecules possess the aziridine moiety. The reactivity of aziridines has been studied, for example, in ring-opening reactions with thiols. However, not much interest seems to be given to reactions of aziridines in aqueous media, despite the numberless advantages of using water as solvent in organic chemistry. The nucleophilic ring-opening reaction of aziridines in aqueous media was here explored. Following the Kaplan aziridine synthetic methodology, in which pyridinium salts undergo a photochemical transformation to give bicyclic vinyl aziridines, new aziridines were synthetized. Their nucleophilic ring-opening reaction in water under physiological conditions was investigated and a range of sulphur, nitrogen, carbon and oxygen nucleophiles tested. Thiols, anilines and azide proved to be good nucleophiles to react with the aziridines, giving the ring-opening product in moderate to good yields. The best results were obtained with thiols, more specifically with cysteine-derived nucleophiles. Preliminary results show that these bicyclic vinyl aziridines can modify calcitonin, a peptide containing two cysteine amino acids residues, grating them the potential to be used in bioconjugation as ligands to cysteine-containing proteins, or even as enzyme inhibitors of, for example, cysteine proteases. Additionally, exploratory investigations suggest that the separation of both enantiomers of the bicyclic vinyl aziridine can be performed by taking advantage of an enzymatic methodology for the resolution of racemic secondary alcohols. Both enantiomers would be highly valuable as precursors in the synthesis of enantiomerically pure molecules, as no other method is currently reported for their separation.

Product quality judgments in a two-sequence cue environment

Previous research demonstrated that the sequence of informational cues and the level of distraction have an impact on the judgment of a product’s quality. This study investigates the influence of the force behind the processing of these cues, working memory (WM). The results indicate that without distraction, consumers with low and high WM capacity (WMC) equally base their product evaluation on the first sequential cue. In the presence of a distractor, however, low WM individuals are no longer able to recall the initial cue, and thus derive their product judgment from the final cue. Moreover, evidence of intercultural differences in the perception of product related cues, and their aptitude for signaling a favorable product quality is provided.

Chesney's: Growing through product expansion

Chesney’s: Growing Through Product Expansion The purpose of this work project is to have a better understanding about how to proceed when a company is challenged by new options to grow and thrive. It aims to decode the next direction of Chesney’s Ltd, a United Kingdom leading company in luxurious replicas of antique fireplaces, wood burning stoves and other architectural pieces. The work project relies on the concepts of strategy, innovation and design thinking in order to encourage dynamic activities within the company. Chesney’s continuously tries to improve and innovate and this work project will assess whether the possible options have strategic fit with the purpose of the company and consequently, create an introduction plan for the opportunity that shows higher probabilities of becoming successful.

Sustained competitive advantage of different sized multinational corporations in rural base of the pyramid markets

This thesis explores how multinational corporations of different sizes create barriers to imitation and therefore sustain competitive advantage in rural and informal Base of the Pyramid economies. These markets require close cooperation with local partners in a dynamic environment that lacks imposable property rights and follows a different rationale than developed markets. In order to explore how competitive advantage is sustained by different sized multinational corporations at the Base of the Pyramid, the natural-resource-based view and the dynamic capabilities perspective are integrated. Based on this integration the natural-resource-based view is extended by identifying critical dynamic capabilities that are assumed to be sources of competitive advantage at the Base of the Pyramid. Further, a contrasting case study explores how the identified dynamic capabilities are protected and their competitive advantage is sustained by isolating mechanisms that create barriers to imitation for a small to medium sized and a large multinational corporation. The case study results give grounds to assume that most resource-based isolating mechanisms create barriers to imitation that are fairly high for large and established multinational corporations that operate at the rural Base of the Pyramid and have a high product and business model complexity. On the contrary, barriers to imitation were found to be lower for young and small to medium sized multinational corporations with low product and business model complexity that according to some authors represent the majority of rural Base of the Pyramid companies. Particularly for small to medium sized multinational corporations the case study finds a relationship- and transaction-based unwillingness of local partners to act opportunistically rather than a resource-based inability to imitate. By offering an explanation of sustained competitive advantage for small to medium sized multinational corporations at the rural Base of the Pyramid this thesis closes an important research gap and recommends to include institutional and transaction-based research perspectives.