Aqueous biphasic system based on cholinium ionic liquids: extraction of biologically active phenolic acids

Phenolic acids are aromatic secondary plant metabolites, widely spread throughout the plant kingdom. Due to their biological and pharmacological properties, they have been playing an important role in phytotherapy and consequently techniques for their separation and purification are in need. This thesis aims at exploring new sustainable separation processes based on ionic liquids (ILs) in the extraction of biologically active phenolic acids. For that purpose, three phenolic acids with similar chemical structures were selected: cinnamic acid, p-coumaric acid and caffeic acid. In the last years, it has been shown that ionic liquids-based aqueous biphasic systems (ABSs) are valid alternatives for the extraction, recovery and purification of biomolecules when compared to conventional ABS or extractions carried out with organic solvents. In particular, cholinium-based ILs represent a clear step towards a greener chemistry, while providing means for the implementation of efficient techniques for the separation and purification of biomolecules. In this work, ABSs were implemented using cholinium carboxylate ILs using either high charge density inorganic salt (K3PO4) or polyethylene glycol (PEG) to promote the phase separation of aqueous solutions containing three different phenolic acids. These systems allow for the evaluation of effect of chemical structure of the anion on the extraction efficiency. Only one imidazolium-based IL was used in order to establish the effect of the cation chemical structure. The selective extraction of one single acid was also researched. Overall, it was observed that phenolic acids display very complex behaviours in aqueous solutions, from dimerization to polymerization and also hetero-association are quite frequent phenomena, depending on the pH conditions. These phenomena greatly hinder the correct quantification of these acids in solution.

Res Publica: Citizenship and Political Representation in Portugal, 1820-1926

The term res publica (literally “thing of the people”) was coined by the Romans to translate the Greek word politeia, which, as we know, referred to a political community organised in accordance with certain principles, amongst which the notion of the “good life” (as against exclusively private interests) was paramount. This ideal also came to be known as political virtue. To achieve it, it was necessary to combine the best of each “constitutional” type and avoid their worst aspects (tyranny, oligarchy and ochlocracy). Hence, the term acquired from the Greeks a sense of being a “mixed” and “balanced” system. Anyone that was entitled to citizenship could participate in the governance of the “public thing”. This implied the institutionalization of open debate and confrontation between interested parties as a way of achieving the consensus necessary to ensure that man the political animal, who fought with words and reason, prevailed over his “natural” counterpart. These premises lie at the heart of the project which is now being presented under the title of Res Publica: Citizenship and Political Representation in Portugal, 1820-1926. The fact that it is integrated into the centenary commemorations of the establishment of the Republic in Portugal is significant, as it was the idea of revolution – with its promise of rupture and change – that inspired it. However, it has also sought to explore events that could be considered the precursor of democratization in the history of Portugal, namely the vintista, setembrista and patuleia revolutions. It is true that the republican regime was opposed to the monarchic. However, although the thesis that monarchy would inevitably lead to tyranny had held sway for centuries, it had also been long believed that the monarchic system could be as “politically virtuous” as a republic (in the strict sense of the word) provided that power was not concentrated in the hands of a single individual. Moreover, various historical experiments had shown that republics could also degenerate into Caesarism and different kinds of despotism. Thus, when absolutism began to be overturned in continental Europe in the name of the natural rights of man and the new social pact theories, initiating the difficult process of (written) constitutionalization, the monarchic principle began to be qualified as a “monarchy hedged by republican institutions”, a situation in which not even the king was exempt from isonomy. This context justifies the time frame chosen here, as it captures the various changes and continuities that run through it. Having rejected the imperative mandate and the reinstatement of the model of corporative representation (which did not mean that, in new contexts, this might not be revived, or that the second chamber established by the Constitutional Charter of 1826 might not be given another lease of life), a new power base was convened: national sovereignty, a precept that would be shared by the monarchic constitutions of 1822 and 1838, and by the republican one of 1911. This followed the French example (manifested in the monarchic constitution of 1791 and in the Spanish constitution of 1812), as not even republicans entertained a tradition of republicanism based upon popular sovereignty. This enables us to better understand the rejection of direct democracy and universal suffrage, and also the long incapacitation (concerning voting and standing for office) of the vast body of “passive” citizens, justified by “enlightened”, property- and gender-based criteria. Although the republicans had promised in the propaganda phase to alter this situation, they ultimately failed to do so. Indeed, throughout the whole period under analysis, the realisation of the potential of national sovereignty was mediated above all by the individual citizen through his choice of representatives. However, this representation was indirect and took place at national level, in the hope that action would be motivated not by particular local interests but by the common good, as dictated by reason. This was considered the only way for the law to be virtuous, a requirement that was also manifested in the separation and balance of powers. As sovereignty was postulated as single and indivisible, so would be the nation that gave it soul and the State that embodied it. Although these characteristics were common to foreign paradigms of reference, in Portugal, the constitutionalization process also sought to nationalise the idea of Empire. Indeed, this had been the overriding purpose of the 1822 Constitution, and it persisted, even after the loss of Brazil, until decolonization. Then, the dream of a single nation stretching from the Minho to Timor finally came to an end.

Structural and functional characterization of ModA and TupA proteins belonging to the molybdate and tungstate transport system from desulfovibrio alaskensis G20

Fundação para a Ciência e Tecnologia - EXPL/BBB-BEP/0274/2012

Wearable monitoring system for assistance dogs

Despite the recent progresses in robotics, autonomous robots still have too many limitations to reliably help people with disabilities. On the other hand, animals, and especially dogs, have already demonstrated great skills in assisting people in many daily situations. However, dogs also have their own set of limitations. For example, they need to rest periodically, to be healthy (physically and psychologically), and it is difficult to control them remotely. This project aims to “augment” the Assistance dog, by developing a system that compensates some of the dog weaknesses through a robotic device mounted on the dog harness. This specific study, involved in the COCHISE project, focuses on the development of a system for the monitoring of dogs activity and physiological parameters.

Control system for actuation and sensing in digital microfluidics devices

Digital Microfluidics (DMF) is a second generation technique, derived from the conventional microfluidics that instead of using continuous liquid fluxes, it uses only individual droplets driven by external electric signals. In this thesis a new DMF control/sensing system for visualization, droplet control (movement, dispensing, merging and splitting) and real time impedance measurement have been developed. The software for the proposed system was implemented in MATLAB with a graphical user interface. An Arduino was used as control board and dedicated circuits for voltage switching and contacts were designed and implemented in printed circuit boards. A high resolution camera was integrated for visualization. In our new approach, the DMF chips are driven by a dual-tone signal where the sum of two independent ac signals (one for droplet operations and the other for impedance sensing) is applied to the electrodes, and afterwards independently evaluated by a lock-in amplifier. With this new approach we were able to choose the appropriated amplitudes and frequencies for the different proposes (actuation and sensing). The measurements made were used to evaluate the real time droplet impedance enabling the knowledge of its position and velocity. This new approach opens new possibilities for impedance sensing and feedback control in DMF devices.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Information provision improvement with a geofencing event-bases system

Nowadays there is a big percentage of the population, specially young users, which are smartphone users and there is a lot of information to be provided within the applications, information provision should be done carefully and should be accurate, otherwise an overload of information will be produced, and the user will discard the app which is providing the information. Mobile devices are becoming smarter and provide many ways to filter information. However, there are alternatives to improve information provision from the side of the application. Some examples are, taking into account the local time, considering the battery level before doing an action and checking the user location to send personalized information attached to that location. SmartCampus and SmartCities are becoming a reality and they have more and more data integrated every day. With all this amount of data it is crucial to decide when and where is the user going to receive a notification with new information. Geofencing is a technique which allows applications to deliver information in a more useful way, in the right time and in the right place. It consists of geofences, physical regions delimited by boundaries, and devices that are eligible to receive the information assigned to the geofence. When devices cross one of these geofences an alert is pushed to the mobile device with the information.

Creation of a web application for smart park system and parking prediction study for system integration

In the last few years, we have observed an exponential increasing of the information systems, and parking information is one more example of them. The needs of obtaining reliable and updated information of parking slots availability are very important in the goal of traffic reduction. Also parking slot prediction is a new topic that has already started to be applied. San Francisco in America and Santander in Spain are examples of such projects carried out to obtain this kind of information. The aim of this thesis is the study and evaluation of methodologies for parking slot prediction and the integration in a web application, where all kind of users will be able to know the current parking status and also future status according to parking model predictions. The source of the data is ancillary in this work but it needs to be understood anyway to understand the parking behaviour. Actually, there are many modelling techniques used for this purpose such as time series analysis, decision trees, neural networks and clustering. In this work, the author explains the best techniques at this work, analyzes the result and points out the advantages and disadvantages of each one. The model will learn the periodic and seasonal patterns of the parking status behaviour, and with this knowledge it can predict future status values given a date. The data used comes from the Smart Park Ontinyent and it is about parking occupancy status together with timestamps and it is stored in a database. After data acquisition, data analysis and pre-processing was needed for model implementations. The first test done was with the boosting ensemble classifier, employed over a set of decision trees, created with C5.0 algorithm from a set of training samples, to assign a prediction value to each object. In addition to the predictions, this work has got measurements error that indicates the reliability of the outcome predictions being correct. The second test was done using the function fitting seasonal exponential smoothing tbats model. Finally as the last test, it has been tried a model that is actually a combination of the previous two models, just to see the result of this combination. The results were quite good for all of them, having error averages of 6.2, 6.6 and 5.4 in vacancies predictions for the three models respectively. This means from a parking of 47 places a 10% average error in parking slot predictions. This result could be even better with longer data available. In order to make this kind of information visible and reachable from everyone having a device with internet connection, a web application was made for this purpose. Beside the data displaying, this application also offers different functions to improve the task of searching for parking. The new functions, apart from parking prediction, were: - Park distances from user location. It provides all the distances to user current location to the different parks in the city. - Geocoding. The service for matching a literal description or an address to a concrete location. - Geolocation. The service for positioning the user. - Parking list panel. This is not a service neither a function, is just a better visualization and better handling of the information.

Integration of a mobile autonomous robot in a surveillance multi-agent system

This dissertation aims to guarantee the integration of a mobile autonomous robot equipped with many sensors in a multi-agent distributed and georeferenced surveillance system. The integration of a mobile autonomous robot in this system leads to new features that will be available to clients of surveillance system may use. These features may be of two types: using the robot as an agent that will act in the environment or by using the robot as a mobile set of sensors. As an agent in the system, the robot can move to certain locations when alerts are received, in order to acknowledge the underlying events or take to action in order to assist in resolving this event. As a sensor platform in the system, it is possible to access information that is read from the sensors of the robot and access complementary measurements to the ones taken by other sensors in the multi-agent system. To integrate this mobile robot in an effective way it is necessary to extend the current multi-agent system architecture to make the connection between the two systems and to integrate the functionalities provided by the robot into the multi-agent system.

Design, implementation, and performance of a distributed and scalable sensor system for critical distance measurements in the CMS detector at LHC

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

Designing and implementing a performance measurement system in Auto Ribeiro, Lda.

In any business it is very important to measure the performance and it helps to select key information to make better decisions on time. This research focuses on the design and implementation of a performance measurement system in a Portuguese medium size firm operating in the specialized health care transformation vehicles industry. From the evidence that outputs from Auto Ribeiro’s current information system is misaligned with the company’s objectives and strategy, this research tries to solve this business problem through the development of a Balanced Scorecard analysis, although there are some issues, which deserve further development.

Prospective system analysis of stationary battery systems under the frame of Constructive Technology Assessment

Based on the report for the unit “Project IV” of the PhD programme on Technology Assessment under the supervision of Dr.-Ing. Marcel Weil and Prof. Dr. António Brandão Moniz. The report was presented and discussed at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus.

The financial system in Mozambique: Opportunities, barriers and market potential

This research is empirical and exploratory intending to analyse the attractiveness of banking in Mozambique, considering its positive outlook. To identify the opportunities and barriers, the methods adopted were elite interviews with banking executives, complemented by secondary data. The opportunities for new entrants seem to include bankarization and the emergence of micro and smallmedium enterprises; other avenues seem to include investment banking, support of mega-projects (e.g. energy, infrastructures) through syndicates and cooperation with multilaterals, and the participation in developing capital markets. Conversely, the main barriers include shortage of talent, inadequate infrastructures, poverty, unsophisticated entrepreneurial culture (e.g. informal economy, inadequate financial reporting), burdensome bureaucracy (e.g. visas), foreign exchange regulation, as well as low liquidity and high funding costs for banks. The key conclusions suggest a window of opportunity for niche markets, and new products and services in retail and investment banking.

The system of Transfer Pricing in a multinational

Transfer prices are used by the majority of firms worldwide when intermediate products or services are transferred within the same organization. These prices are reported as revenue for the selling entity (division, unit, department etc.) and as cost for the buying entity. Nevertheless, transfer prices lead to many disputes among managers in the same organization as transfer prices influence the performance of their entities. In cross-border transactions, transfer prices can be used by firms to reduce corporate taxes and thus, increase total firm profits. In order to fight against this firms’ practice, tax authorities require firms to establish a transfer pricing system in accordance with OECD1 Transfer Pricing Guidelines.