Analysis of chromium behaviour and speciation during the electrodialytic process

The interest in chromium (Cr) arises from the widespread use of this heavy metal in various industrial processes that cause its release as liquid, solid and gaseous waste into the environment. The impact of Cr on the environment and living organisms primarily depends on its chemical form, since Cr(III) is an essential micronutrient for humans, other animals and plants, and Cr(VI) is highly toxic and a known human carcinogen. This study aimed to evaluate if the electrodialytic process (ED) is an appropriate treatment for Cr removal, through a critical overview of Cr speciation, before and after the ED experiments, to assess possible Cr(III)-Cr(VI) interconversions during the treatment. ED was the treatment technique applied to two types of matrices containing Cr: chromate copper arsenate (CCA) contaminated soil and municipal solid waste incineration (MSWI) fly ash. In order to study Cr remediation, three EDR set-ups were used: a new set-up, the combined cell (2/3C or 3/2C), with three compartments, alternating current between two anodes and different initial experimental conditions, one set-up with three compartments (3C cell) and the other set-up with two compartments (2C cell). The Cr removal rates obtained in this study were between 10-36% for the soil, and 1-13% for the fly ash. The highest Cr removal rates were achieved in the 26 days experiments: 36% for the soil, 13% for the fly ash. Regarding the 13 days experiments, the highest Cr removal rates were attained with the 2/3C set-up: 24% for the soil, 5% for the fly ash. The analysis of Cr(VI) was performed before and after ED experiments to evaluate eventual changes in Cr speciation during the treatment. This analysis was conducted by two methods: USEPA Method 3060A, for the extraction of Cr(VI); and Hach Company Method 8023, for the detection of Cr(VI). Despite the differences in Cr total concentration, both matrices presented a similar speciation, with Cr(III) being the main species found and Cr(VI) less than 3% of Cr total, before and after the treatment. For fly ash, Cr(VI) was initially below the detection limit of the method and remained that way after the treatment. For soil, Cr(VI) decreased after the treatment. Oxidation of Cr(III) to Cr(VI) did not occur during the ED process since there was no increase in Cr(VI) in the matrices after the treatment. Hence, the results of this study indicate that ED is an appropriate technique to remediate matrices containing Cr because it contributes to Cr removal, without causing Cr(III)-Cr(VI) interconversions.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

A wave of change: Labor market and social security impacts of the EU refugee inflow

The recent massive inflow of refugees to the European Union (EU) raises a number of unanswered questions on the economic impact of this phenomenon. To examine these questions, we constructed an overlapping-generations model that describes the evolution of the skill premium and of the welfare benefit level in relevant European countries, in the aftermath of an inflow of asylum-seekers. In our simulation, relative wages of skilled workers increase between 8% and 11% in the period of the inflow; their subsequent time path is dependent on the initial skill premium. The entry of migrants creates a fiscal surplus of about 8%, which can finance higher welfare benefits in the subsequent periods. These effects are weaker in a scenario where refugees do not fully integrate into the labor market.

Analysis of a controversial decision process: the case of the pumped hydro storage power plant Atdorf in Germany

Based on the report for the unit “Métodos Interactivos de Participação e Decisão A” (Interactive methods of participation and decision A), coordinated by Prof. Lia Maldonado Teles de Vasconcelos and Prof. Nuno Miguel Ribeiro Videira Costa. This unit was provided for the PhD Program in Technology Assessment in 2015/2016.

Assessing the role of social networks on migrant labor market outcomes: Evidence from a representative immigrant survey

What role do social networks play in determining migrant labor market outcomes? We examine this question using data from a random sample of 1500 immigrants living in Ireland. We propose a theoretical model formally predicting that immigrants with more contacts have additional access to job offers, and are therefore better able to become employed and choose higher paid jobs. Our empirical analysis confirms these findings, while focusing more generally on the relationship between migrants’ social networks and a variety of labor market outcomes (namely wages, employment, occupational choice and job security), contrary to the literature. We find evidence that having one more contact in the network is associated with an increase of 11pp in the probability of being employed and with an increase of about 100 euros in the average salary. However, our data is not suggestive of a network size effect on occupational choice and job security. Our findings are robust to sample selection and other endogeneity concerns.

Assessing the role of social networks on migrant labor market outcomes: Evidence from a representative immigrant survey

What role do social networks play in determining migrant labor market outcomes? We examine this question using data from a random sample of 1500 immigrants living in Ireland. We propose a theoretical model formally predicting that immigrants with more contacts have additional access to job offers, and are therefore better able to become employed and choose higher paid jobs. Our empirical analysis confirms these findings, while focusing more generally on the relationship between migrants’ social networks and a variety of labor market outcomes (namely wages, employment, occupational choice and job security), contrary to the literature. We find evidence that having one more contact in the network is associated with an increase of 11pp in the probability of being employed and with an increase of about 100 euros in the average salary. However, our data is not suggestive of a network size effect on occupational choice and job security. Our findings are robust to sample selection and other endogeneity concerns.

Millennium BCP: Optimization of the branches closure process

Nowadays, a significant number of banks in Portugal are facing a bank-branch restructuring problem, and Millennium BCP is not an exception. The closure of branches is a major component of profit maximization through the reduction in operational and personnel costs but also an opportunity to approach the idea of “baking of future” and start thinking on the benefits of the digital era. This dissertation centers on a current high-impact organizational problem addressed by the company and consists in a proposal of optimization to the model that Millennium BCP uses. Even though measures of performance are usually considered the most important elements in evaluating the viability of branches, there is evidence suggesting that other general factors can be important to assess branch potential, such as the influx on branches, business dimensions of a branch and its location, which will be addressed in this project.

Assessing fraud risk of selecção, contratação e manutenção de fornecedores process of Sonae Investimentos

The present Work Project (WP) is the result of Sonae’s concern with fraud risk, seeking to implement a method that formally describes and evaluates it in its various forms. In a context of limited human, capital, time and tools’ resources, the Internal Audit (IA) department of the company developed a framework to raise the awareness of top management and identify which processes of its value chain present a higher level of exposure to fraud, with the purpose of redirecting attention to those and prioritizing the creation of new mechanisms to monitor its KPIs’ dynamics.

Proving a market for a startup befor scaling using the hypothesis-driven entrepreneurship process

The year is 2015 and the startup and tech business ecosphere has never seen more activity. In New York City alone, the tech startup industry is on track to amass $8 billion dollars in total funding – the highest in 7 years (CB Insights, 2015). According to the Kauffman Index of Entrepreneurship (2015), this figure represents just 20% of the total funding in the United States. Thanks to platforms that link entrepreneurs with investors, there are simply more funding opportunities than ever, and funding can be initiated in a variety of ways (angel investors, venture capital firms, crowdfunding). And yet, in spite of all this, according to Forbes Magazine (2015), nine of ten startups will fail. Because of the unpredictable nature of the modern tech industry, it is difficult to pinpoint exactly why 90% of startups fail – but the general consensus amongst top tech executives is that “startups make products that no one wants” (Fortune, 2014). In 2011, author Eric Ries wrote a book called The Lean Startup in attempts to solve this all-too-familiar problem. It was in this book where he developed the framework for The Hypothesis-Driven Entrepreneurship Process, an iterative process that aims at proving a market before actually launching a product. Ries discusses concepts such as the Minimum Variable Product, the smallest set of activities necessary to disprove a hypothesis (or business model characteristic). Ries encourages acting briefly and often: if you are to fail, then fail fast. In today’s fast-moving economy, an entrepreneur cannot afford to waste his own time, nor his customer’s time. The purpose of this thesis is to conduct an in-depth of analysis of Hypothesis-Driven Entrepreneurship Process, in order to test market viability of a reallife startup idea, ShowMeAround. This analysis will follow the scientific Lean Startup approach; for the purpose of developing a functional business model and business plan. The objective is to conclude with an investment-ready startup idea, backed by rigorous entrepreneurial study.

Customer service process optimization at Sonae e MC

Sonae MC is constantly innovating and keeping up with the new market trends, being increasingly focused on E-commerce due to its growing importance. In that area, a telephone line is available to support customers with their problems. However, rare were the cases in which those problems were solved in the first contact. Therefore, the goal of this work was to reengineer these processes to improve the service performance and consequently the customer’s satisfaction. Following an evolutionary approach, improvement opportunities were suggested and if correctly implemented the cases resolution time could decrease 1 day and Sonae MC will save €7.750 per month.

The role of information systems in business process redesign : a case of Turkish electricity market

This study is specifically concerned with the effect of the Enterprise Resource Planning (ERP) on the Business Process Redesign (BPR). Researcher’s experience and the investigation on previous researches imply that BPR and ERP are deeply related to each other and a study to found the mentioned relation further is necessary. In order to elaborate the hypothesis, a case study, in particular Turkish electricity distribution market and the phase of privatization are investigated. Eight companies that have taken part in privatization process and executed BPR serve as cases in this study. During the research, the cases are evaluated through critical success factors on both BPR and ERP. It was seen that combining the ERP Solution features with business processes lead the companies to be successful in ERP and BPR implementation. When the companies’ success and efficiency were compared before and after the ERP implementation, a considerable change was observed in organizational structure. It was spotted that the team composition is important in the success of ERP projects. Additionally, when the ERP is in driver or enabler role, the companies can be considered successful. On the contrary, when the ERP has a neutral role of business processes, the project fails. In conclusion, it can be said that the companies, which have implemented the ERP successfully, have accomplished the goals of the BPR.

Portuguese footwear

This case study deals with the reasons why the Portuguese Footwear Cluster evolved from a small industry focused on the Portuguese internal market into a high-tech industry capable of designing and producing some of the best and most expensive shoes in the world. It went from using the low labor costs of an under-developed economy to produce long series of shoes for pre-designated brands in Northern Europe to having the ability to produce some of the highest quality shoes in the world, in small orders, designed and delivered in record timing, while offering a service of excellence. In 1960, when Portugal became a founding member of EFTA, the footwear industry in Portugal was globally irrelevant, producing low quality shoes directed to the puny internal market and its African colonies. The new free trade zone with economies much more developed that itself, led to the transfer of the labor-intensive, low skilled manufacture from the UK and Scandinavian countries to Portugal. Mostly through joint ventures, the industry was able to mechanize itself so it could produce shoes in long series at low prices. It grew based on that model up until the 1990s, when the emergence of the Asian countries meant either a different strategy or extinction. Taking advantage of a clarified leadership of its trade association, it used the European funds made available to it during the 1990s, to modernize its factory floors, so it could become more nimble and flexible, expand its design capabilities and dramatically change its image abroad. The role of the trade association, APICCAPS, was instrumental throughout the process going well beyond what came to be expected of trade associations. It used its privileged position to provide understanding regarding the current situation and competitive landscape, alerting for changes ahead and at the same time providing a strategic vision on how to deal with the challenges. Moreover, it helped companies get the resources they needed by creating a research center in collaboration with a University, by creating a process that allowed companies to learn from each other via the show casing of projects sponsored by the association or by helping industrials traveling to locations where new customers could be found. The case study provides insight on how the trade association leadership, which has no formal authority over its members, was able to guide and motivate an industry through a consistent positive approach. That approach focused on the solutions, on the opportunities and on the success stories of companies in the cluster rather than on what was wrong or needed to be addressed. Based on this case, one could use the leadership role of the trade association to discuss and change leaders’ roles and styles in other sectors or even companies.

Removal of organic contaminants from wastewater using the electrodialytic process

Pharmaceuticals and personal care products (PPCPs) are widely used on a daily basis. After their usage they reach the wastewater treatment plants (WWTPs). These compounds have different physico-chemical characteristics, which makes them difficult to completely remove in the WWTPs, througth conventional treatments. Currently, there is no legislation regarding PPCPs thresholds in effluent discharge. But, even at vestigial concentrations, these compounds enclose environmental risks due to, e.g., endocrine disruption potential. There is a need of alternative techniques for their removal in WWTPs. The main goal of this work was to assess the use of electrodialytic (ED) process to remove PPCPs from the effluent to be discharged. A two-compartment ED cell was used testing (i) the effluent position in the cell (anode and cathode compartment); (ii) the use of anion (AEM) and cation exchange membrane (CEM); (iii) the treatment period (6, 12 and 24 hours); (iv) effluent recirculation and current steps; (v) the feasibility of sequential treatments. Phosphorus (P) removal from effluent and energetic costs associated to the process were also evaluated. Five PPCPs were studied – caffeine (CAF), bisphenol A (BPA), 17 β-estradiol (E2), ethinyl estradiol (EE2) and oxybenzone (MBPh). The ED process showed to be effective in the removal when effluent is in the anode compartment. Oxidation is suggested to be the main removal process, which was between 88 and 96%, for all the compounds, in 6 hours. Nevertheless, the presence of intermediates and/or by-products was also observed in some cases. Effluent recirculation should have a retention time in the ED cell big enough to promote removal whereas the current steps (effluent in anode compartment) slightly increased removal efficiencies (higher than 80% for all PPCPs). The sequential set of ED treatment (effluent in anode compartment) showed to be effective during both periods with a removal percentage between 80 and 95% and 73 to 88% in the case of AEM and CEM, respectively. Again, the main removal process is strongly suggested to be oxidation in the anode compartment. However, there was an increase of BOD5 and COD, which might be explained by effluent spiking, these parameters limiting the effluent discharge. From these treatments, the use of AEM, enhanced the P removal from effluent to minimize risk of eutrophication. Energetic costs of the best set-up (6 hours) are approximately 0,8€/m3 of wastewater, a value considered low, attending to the prices of other treatment processes.