Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

The World Health Organization Multi-Professional Patient Safety Curriculum : implementation of key modules and its impact on patient safety knowledge, skills, and attitudes of medical students at the University of Algarve

ABSTRACT - Objectives: We attempted to show how the implementation of the key elements of the World Health Organization Patient Safety Curriculum Guide Multi-professional Edition in an undergraduate curriculum affected the knowledge, skills, and attitudes towards patient safety in a graduate entry Portuguese Medical School. Methods: After receiving formal recognition by the WHO as a Complementary Test Site and approval of the organizational ethics committee , the validated pre-course questionnaires measuring the knowledge, skills, and attitudes to patient safety were administered to the 2nd and3rd year students pursuing a four-year course (N = 46). The key modules of the curriculum were implemented over the academic year by employing a variety of learning strategies including expert lecturers, small group problem-based teaching sessions, and Simulation Laboratory sessions. The identical questionnaires were then administered and the impact was measured. The Curriculum Guide was evaluated as a health education tool in this context. Results: A significant number of the respondents, 47 % (n = 22), reported having received some form of prior patient safety training. The effect on Patient Safety Knowledge was assessed by using the percentage of correct pre- and post-course answers to construct 2 × 2 contingency tables and by applying Fishers’ test (two-tailed). No significant differences were detected (p < 0.05). To assess the effect of the intervention on Patient Safety skills and attitudes, the mean and standard deviation were calculated for the pre and post-course responses, and independent samples were subjected to Mann-Whitney’s test. The attitudinal survey indicated a very high baseline incidence of desirable attitudes and skills toward patient safety. Significant changes were detected (p < 0.05) regarding what should happen if an error is made (p = 0.016), the role of healthcare organizations in error reporting (p = 0.006), and the extent of medical error (p = 0.005). Conclusions: The implementation of selected modules of the WHO Patient Safety Curriculum was associated with a number of positive changes regarding patient safety skills and attitudes, with a baseline incidence of highly desirable patient safety attitudes, but no measureable change on the patient safety knowledge, at the University of Algarve Medical School. The significance of these results is discussed along with implications and suggestions for future research.

Consumo de álcool nas mães que amamentam durante o 1º ano de vida da criança, prevalência e fatores associados, em Vila Fanca de Xira, em 2014

RESUMO - Introdução: O consumo de álcool durante o aleitamento materno é um tema que tem vindo a ganhar relevo nos últimos anos. Contrariamente ao consumo de álcool durante a gravidez, em que já se conhecem bem as consequências sobre o feto, sobre os efeitos do consumo de álcool durante a amamentação ainda pouco se sabe. Este estudo visa, assim, caracterizar o consumo de álcool e fatores associados nas mães que amamentam, ou amamentaram, durante o 1º ano de vida da criança no concelho de Vila Franca de Xira em 2014. Metodologia: Foi realizado um estudo transversal, com a aplicação de um questionário de auto-preenchimento, a uma amostra estratificada e com alocação proporcional por Unidade Funcional, de mães que estiveram nas consultas de saúde infantil das unidades de saúde do concelho, entre março e maio de 2014. Resultados: A idade mediana das mães foi 31 anos e das crianças foi 3 meses. O tempo total em aleitamento teve uma mediana de 2 meses e somente 16,3% amamentaram mais de 5 meses. A prevalência do consumo de álcool durante a amamentação foi 7,9% e na gestação foi 8,1%. Os fatores que se associaram, com significância estatística, ao consumo de álcool na amamentação foram a maior idade da mãe, os conhecimentos que esta possuía e o consumo anterior de álcool na gestação. Os hábitos tabágicos durante a amamentação tiveram uma prevalência de 13,4% e o consumo de substâncias ilícitas de 0,6%. Conclusões: A prevalência do consumo de álcool durante a amamentação, a nível local, mantém-se semelhante à da gestação, sendo muito inferior à encontrada em outros estudos de outros países. O tempo total em amamentação é baixo considerando as recomendações nacionais e internacionais.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Criminosos popularizados na narrativa de divulgação (De 1838 aos Alvores da República)

O presente estudo incide sobre obras impressas que tomaram como motivo central as «façanhas» de criminosos com referência histórica celebrizados em Portugal na segunda metade do século XIX e inícios de XX e mostra que, enquanto narrativas elaboradas para o grande público, os textos foram não só um reflexo da popularidade prévia dos famigerados transgressores, como também um fator incontornável da sua «lendarização» ao longo de décadas. São as seguintes as figuras dos infratores que protagonizaram as ficções em apreço: José Joaquim de Sousa Reis, ou «o Remexido» (1797-1838), Diogo Alves, ou «o Pancada» (1810-1841), Francisco de Matos Lobo (1814-1842), José Teixeira da Silva, ou «o José do Telhado» (1816-1875), João Victor da Silva Brandão, ou «o João Brandão de Midões» (1825-1880), e Vicente Urbino de Freitas (1859-1913). A tese agora apresentada aborda um corpus textual de características singulares, nunca antes coligido nem estudado. Comprova que os textos sobre as figuras criminosas tiveram uma função iminentemente noticiosa, pedagógico-edificante e política, apropriando-se de relatos orais, adotando procedimentos de atestação da veracidade (transcrição de documentos na primeira pessoa, referenciação cronológica, espacial, geográfica dos eventos, alusão às fontes) e incorporando diversas fontes do conhecimento dos crimes, quer de origem popular (geralmente designadas de «musa popular», «tradição»), quer de caráter erudito e teórico-científico («estudo», «estudo social»). Assim, foram analisadas as condições históricas excecionais nas quais as ficções emergiram: as características específicas do seu universo editorial, a apropriação a um público amplo (o formato de coleção, uso de sinopses e de outros elementos gráficos), as regularidades discursivas das obras (ocorrência de determinados dispositivos de organização textual), os procedimentos narrativos (recurso abundante a paratextos com intuito explicativo e aproximação a modalidades ficcionais conhecidas do público da época) e, ainda, as configurações imagéticas inspiradas nos discursos oficiais (influência de ciências e doutrinas epocais emergentes, como a criminologia, a antropologia criminal, a frenologia, a psiquiatria, a sociologia). Em suma, estas edições produzidas em diversos contextos e por um elenco autoral heterogéneo não só viveram da relação com as edições predecessoras, ao longo de gerações, como recriaram e ampliaram as «façanhas» dos transgressores em função de diversos propósitos e fontes: ampla divulgação dos casos criminais, condenação pública dos infratores, análise médico-científica dos sujeitos culpados, especulação política, pressão sobre o foro judiciário, edificação moral do público leitor. Trata-se, sem dúvida, de produções únicas, que erigiram a comemoração dos facínoras e sucessivamente reinscreveram as suas histórias reais na problemática do homem criminal e na consciência ética do seu tempo.

Development of human central nervous system 3D in vitro models for preclinical research

Neurological disorders are a major concern in modern societies, with increasing prevalence mainly related with the higher life expectancy. Most of the current available therapeutic options can only control and ameliorate the patients’ symptoms, often be-coming refractory over time. Therapeutic breakthroughs and advances have been hampered by the lack of accurate central nervous system (CNS) models. The develop-ment of these models allows the study of the disease onset/progression mechanisms and the preclinical evaluation of novel therapeutics. This has traditionally relied on genetically engineered animal models that often diverge considerably from the human phenotype (developmentally, anatomically and physiologically) and 2D in vitro cell models, which fail to recapitulate the characteristics of the target tissue (cell-cell and cell-matrix interactions, cell polarity). The in vitro recapitulation of CNS phenotypic and functional features requires the implementation of advanced culture strategies that enable to mimic the in vivo struc-tural and molecular complexity. Models based on differentiation of human neural stem cells (hNSC) in 3D cultures have great potential as complementary tools in preclinical research, bridging the gap between human clinical studies and animal models. This thesis aimed at the development of novel human 3D in vitro CNS models by integrat-ing agitation-based culture systems and a wide array of characterization tools. Neural differentiation of hNSC as 3D neurospheres was explored in Chapter 2. Here, it was demonstrated that human midbrain-derived neural progenitor cells from fetal origin (hmNPC) can generate complex tissue-like structures containing functional dopaminergic neurons, as well as astrocytes and oligodendrocytes. Chapter 3 focused on the development of cellular characterization assays for cell aggregates based on light-sheet fluorescence imaging systems, which resulted in increased spatial resolu-tion both for fixed samples or live imaging. The applicability of the developed human 3D cell model for preclinical research was explored in Chapter 4, evaluating the poten-tial of a viral vector candidate for gene therapy. The efficacy and safety of helper-dependent CAV-2 (hd-CAV-2) for gene delivery in human neurons was evaluated, demonstrating increased neuronal tropism, efficient transgene expression and minimal toxicity. The potential of human 3D in vitro CNS models to mimic brain functions was further addressed in Chapter 5. Exploring the use of 13C-labeled substrates and Nucle-ar Magnetic Resonance (NMR) spectroscopy tools, neural metabolic signatures were evaluated showing lineage-specific metabolic specialization and establishment of neu-ron-astrocytic shuttles upon differentiation. Chapter 6 focused on transferring the knowledge and strategies described in the previous chapters for the implementation of a scalable and robust process for the 3D differentiation of hNSC derived from human induced pluripotent stem cells (hiPSC). Here, software-controlled perfusion stirred-tank bioreactors were used as technological system to sustain cell aggregation and dif-ferentiation. The work developed in this thesis provides practical and versatile new in vitro ap-proaches to model the human brain. Furthermore, the culture strategies described herein can be further extended to other sources of neural phenotypes, including pa-tient-derived hiPSC. The combination of this 3D culture strategy with the implemented characterization methods represents a powerful complementary tool applicable in the drug discovery, toxicology and disease modeling.

Towards a knowledge society

Economies are moving towards competitive stadiums based on knowledge and innovation. The changing environment and the level of globalization demand important efforts in order to sustain competitive advantages. Portugal has experienced a remarkable evolution since its adhesion to the European Union in several fields: economic development, Research & Development (R&D) consolidation, health parameters and social cohesion. As other developed economies, Portugal started its journey towards a knowledge-based economy and has been consolidating an innovation system during the last 35 years. The following report aims to analyze the evolution of a system since its creation to its last transformation within a globalized context. Challenges such as the lack of maturity of the system, the economic crisis, the European paradox, and closing the gap with other European countries are addressed in the next chapters. Likewise, recommendations on these points are provided by the end of the report as potential solutions.

Asking why

The growth of a solid, knowledge-intensive firm, OutSystems—an IT company recognized in 2003 by Fortune magazine as one of the most promising start-ups in the world—is accompanied by efforts to create a strong culture that preserves the traits that have driven OutSystems’ success and that drives innovation, adaptability, high performance, and accountability. The lessons OutSystems learned from previous international experiences are presented along with its latest growth model of branded local partners. The case study is intended to introduce concepts related to organizational culture, traits of cultures that drive innovation, national versus organizational culture, and the challenges of globalization. It is designed to be used in Organizational Behavior classes and is appropriate for MBA- and Master’s-level courses in the area of management. It is suggested as a guideline for 60- to 90-minute classes. Participants are invited to discuss the importance of organizational cultures and their fit with the company strategy. Participants are also encouraged to brainstorm about the best approach to face OutSystems’ new stage of growth, specifically the advantages and consequences of growing as a metanational company. Finally, in the conclusion, the most relevant findings taken from the discussions proposed are revisited: The importance of an organizational culture adapted to the market needs and the potential of innovation behind metanational companies. Other considerations are made about: how the case illustrates the importance of leadership, group age, and group size in the process of building a culture; and how OutSystems’ culture solves the apparent contradiction behind adaptable culture.