How enterprise 2,0 firms take advantage of emergent social software platforms to manage knowledge

This research aims to provide a better understanding on how firms stimulate knowledge sharing through the utilization of collaboration tools, in particular Emergent Social Software Platforms (ESSPs). It focuses on the distinctive applications of ESSPs and on the initiatives contributing to maximize its advantages. In the first part of the research, I have itemized all types of existing collaboration tools and classify them in different categories according to their capabilities, objectives and according to their faculty for promoting knowledge sharing. In the second part, and based on an exploratory case study at Cisco Systems, I have identified the main applications of an existing enterprise social software platform named Webex Social. By combining a qualitative and quantitative approach, as well as combining data collected from survey’s results and from the analysis of the company’s documents, I am expecting to maximize the outcome of this investigation and reduce the risk of bias. Although effects cannot be universalized based on one single case study, some utilization patterns have been underlined from the data collected and potential trends in managing knowledge have been observed. The results of the research have also enabled identifying most of the constraints experienced by the users of the firm’s social software platform. Utterly, this research should provide a primary framework for firms planning to create or implement a social software platform and for firms willing to increase adoption levels and to promote the overall participation of users. It highlights the common traps that should be avoided by developers when designing a social software platform and the capabilities that it should inherently carry to support an effective knowledge management strategy.

Criação de software para análise do batimento ciliar em peixe-zebra

O peixe-zebra é utilizado como modelo vertebrado para estudos in vivo de diversas patologias de origem genética. Neste trabalho pretendeu-se estudar a discinesia ciliar primária através do estudo in vivo do organizador da esquerda-direita destes peixes, conhecido por vesícula de Kupffer. Em particular, após análise de sequências de imagens captadas a alta velocidade, avaliou-se o com-portamento dinâmico de cílios normais e comparou-se com o de cílios com alte-rações genéticas com o objectivo de melhor compreender os processos que in-fluenciam a localização assimétrica dos órgãos internos, associados a esta doen-ça. De vídeos obtidos por microscopia de alta velocidade do interior da vesí-cula de Kupffer foram analisados 32 cílios, sendo 8 normais e os restantes cílios pertencentes a três alterações genéticas diferentes: subexpressão de Pkd2, so-brexpressão de Arl13b e mutação no gene deltaD. Para cada cílio calculou-se a frequência de batimento e caracterizou-se quantitativamente o movimento. Esta última análise teve como base a segmentação manual do cílio em quatro pontos definindo a base, o meio e a ponta. De seguida, estudou-se a dinâmica de cada uma das rectas constituídas por estas três estruturas ao longo do tempo. Com recurso à análise estatística ANOVA podemos comprovar diferenças no movi-mento entre os cílios alterados quando comparados com os normais. A análise da frequência demonstrou que todos os cílios estudados possu-em uma frequência média 34,9 Hz. Demonstrou-se ainda que, quando compa-rados com cílios normais, os cílios Pkd2 possuem um movimento 60% mais rí-gido, os Alr13b são caracterizados por amplitudes angulares 26% superiores no seu movimento e, por fim, a relação entre as amplitudes base/meio é 23% supe-rior nos cílios Delta D. Para implementar estes estudos, desenvolveu-se uma ferramenta baseada num plugin para ImageJ conjuntamente com códigos em R, que poderá vir a ser utilizada em investigações da discinesia ciliar primária em peixes-zebra.

Modelação não linear de estruturas metálicas e mistas em situação de incêndio no software OpenSees

Os incêndios em edifícios representam um fenómeno que pode ter consequências devastadoras quando não controlado, não só em termos de perdas de vidas humanas, como em termos económicos. No passado, a ocorrência de incêndios de grandes dimensões mostrou os efeitos do fogo descontrolado nos edifícios, assim como a ineficiência dos meios de segurança ativa ao fogo. Nas últimas duas décadas, estas questões motivaram o estudo e compreensão da ação dos incêndios nas estruturas dos edifícios. Neste trabalho estuda-se a modelação da ação do fogo em estruturas metálicas e mistas, com o objetivo de contribuir para a sua melhor caracterização. A presente tese foca-se na validação e compreensão da implementação de análises termo-mecânicas a estruturas mistas no software de elementos finitos OpenSees (Open System for Earthquake Engineering Simulation), contribuindo assim para futuros estudos, não só de análises de estruturas mistas sujeitas a incêndio, mas também de análises de estruturas mistas sujeitas a eventos consecutivos, como sismo seguido de incêndio. Neste trabalho é feita uma breve descrição do fenómeno fogo, assim como dos processos inerentes à dinâmica de um incêndio que constituem uma fonte de incerteza para a modelação de cenários de incêndio num edifício. Posto isto, são abordados alguns modelos de incêndios presentes nos Eurocódigos, assim como o recente modelo de fogos móveis(“Travelling fires”). São realizados exemplos de aplicação no software e dois casos de estudo. O primeiro consiste na modelação de dois ensaios ao fogo realizados na Alemanha em 1986 em estruturas metálicas à escala 1/4. O segundo consiste na modelação de um ensaio ao fogo a uma viga de betão armado simplesmente apoiada, realizado no Instituto Superior Técnico em 2010. Os modelos numéricos desenvolvidos no OpenSees contabilizam as não linearidades físicas e geométricas, com elementos finitos de plasticidade distribuída e com uma formulação baseada em deslocamentos. Os resultados numéricos são então comparados com os experimentais, de modo a validar as análises termo-mecânicas no OpenSees.

A solution for estimates in software development projects

The Corporate world is becoming more and more competitive. This leads organisations to adapt to this reality, by adopting more efficient processes, which result in a decrease in cost as well as an increase of product quality. One of these processes consists in making proposals to clients, which necessarily include a cost estimation of the project. This estimation is the main focus of this project. In particular, one of the goals is to evaluate which estimation models fit the Altran Portugal software factory the most, the organization where the fieldwork of this thesis will be carried out. There is no broad agreement about which is the type of estimation model more suitable to be used in software projects. Concerning contexts where there is plenty of objective information available to be used as input to an estimation model, model-based methods usually yield better results than the expert judgment. However, what happens more frequently is not having this volume and quality of information, which has a negative impact in the model-based methods performance, favouring the usage of expert judgement. In practice, most organisations use expert judgment, making themselves dependent on the expert. A common problem found is that the performance of the expert’s estimation depends on his previous experience with identical projects. This means that when new types of projects arrive, the estimation will have an unpredictable accuracy. Moreover, different experts will make different estimates, based on their individual experience. As a result, the company will not directly attain a continuous growing knowledge about how the estimate should be carried. Estimation models depend on the input information collected from previous projects, the size of the project database and the resources available. Altran currently does not store the input information from previous projects in a systematic way. It has a small project database and a team of experts. Our work is targeted to companies that operate in similar contexts. We start by gathering information from the organisation in order to identify which estimation approaches can be applied considering the organization’s context. A gap analysis is used to understand what type of information the company would have to collect so that other approaches would become available. Based on our assessment, in our opinion, expert judgment is the most adequate approach for Altran Portugal, in the current context. We analysed past development and evolution projects from Altran Portugal and assessed their estimates. This resulted in the identification of common estimation deviations, errors, and patterns, which lead to the proposal of metrics to help estimators produce estimates leveraging past projects quantitative and qualitative information in a convenient way. This dissertation aims to contribute to more realistic estimates, by identifying shortcomings in the current estimation process and supporting the self-improvement of the process, by gathering as much relevant information as possible from each finished project.

Novo Software para análise do epitélio nasal humano

A discinesia ciliar primária (DCP) resulta de disfunção ciliar no ser humano, estando associada a um conjunto de sintomas muito diversificados. É uma doença respiratória rara caracterizada por infecções respiratórias, situs inversus, infertilidade e hidrocefalia. Em Portugal não existe nenhum centro de diagnóstico da doença. Mas a inten-ção de criar um surgiu, seguindo o método de centros de diagnóstico para DCP utilizado noutros países. Este diagnóstico consiste em recolher amostras dos cílios do nariz, através do método de escovagem nasal e obter a gravação do batimento das células ciliadas por uma câmara de alta velocidade acoplada a um microscópio com objectivas de alta resolução. É possível estudar a DCP através da análise do comportamento físico dos cílios, e, para uma melhor abordagem, foi desenvolvido um programa executável, em C#, para análise destas amostras. Este, após a escolha de uma zona de interesse da sequência de imagens pelo utilizador (ROI), detecta as frequências do bati-mento ciliar, indicando uma lista com as percentagens das frequências obtidas e cria um mapa de frequências do ROI. A ferramenta permite ainda calcular o comprimento do cílio e realizar um estudo do movimento do mesmo, algo que ainda não foi abordado por outros programas. O código desenvolvido permitirá, assim, obter um diagnóstico de DCP em Por-tugal, rápido e nalguns casos com um melhor desempenho do que a inspecção visual seguida noutros centros de diagnóstico.

Plataforma online de partilha e comparação de software para análise de imagens da retina

Nesta Tese foi desenvolvida uma plataforma online multiutilizador, que tem como objetivo principal comparar algoritmos de análise de imagens para de-terminar o seu grau de eficácia. Um exemplo de aplicação é a comparação de algoritmos de análise de imagens da retina para deteção de drusas. A compa-ração é feita considerando um dos algoritmos como referência padrão e sobre o este são avaliados os restantes. O funcionamento da plataforma é semelhante à de um fórum, onde é possível a um utilizador criar tópicos publicando imagens e seu descritivo. Após a cria-ção do tópico qualquer utilizador pode visualizar o mesmo, dando a hipótese de comentar ou de acrescentar imagens processadas com os seus próprios al-goritmos de análise. Com o aumento de imagens processadas, obtém-se uma base de dados de algoritmos de análise de imagens sobre a qual é possível avaliar o seu grau de eficácia. A plataforma pretende também criar comunidades onde os utilizadores pos-sam interagir uns com os outros comentando sobre os tópicos, contribuindo assim para o melhoramento dos algoritmos. Deste modo, além de uma base de dados que qualquer utilizador pode usar, obtém-se uma fonte de informação disponibilizada por outros profissionais da área.

Efficiency optimization of the transportation supply chain activity: the maritime option for Volkswagen Autoeuropa

Field Lab of Entrepreneurial Innovative Ventures

O uso do software de edição áudio Audacity 2.0.5: aprendizagens decorrentes da sua utilização

Contém CD com áudio como anexo

Cost-to-serve customers’ optimization: Macro project Unilever – Jerónimo Martins

The objective of this work project is to analyse and discuss the importance of the “Cost to Serve” as a differentiation key factor, by accessing cost to serve customers of a Portuguese subsidiary of a multinational company, which is operating in the sector of fast moving consumer goods (FMCG) – Unilever – Jerónimo Martins (UJM). I will also suggest and quantify key proposals to decrease costs and increase customers’ value. Hence, the scope of this work project is focused on logistics and distribution processes of the company supply chain.

Optimization of export support systems: How to promote exports from Portugal to Germany in the area of information technology and electronics

This work project focuses on developing new approaches which enhance Portuguese exports towards a defined German industry sector within the information technology and electronics fields. Firstly and foremost, information was collected and a set of expert and top managers’ interviews were performed in order to acknowledge the demand of the German market while identifying compatible Portuguese supply capabilities. Among the main findings, Industry 4.0 presents itself as a valuable opportunity in the German market for Portuguese medium sized companies in the embedded systems area of expertise for machinery and equipment companies. In order to achieve the purpose of the work project, an embedded systems platform targeting machinery and equipment companies was suggested as well as it was developed several recommendations on how to implement it. An alternative approach for this platform was also considered within the German market namely the eHealth sector having the purpose of enhancing the current healthcare service provision.

Optimization of export support systems

The present paper is a personal reflection on a work project carried out to promote exports from Portugal to Germany in the IT area, under consideration of the deliverables required by the clients CCILA and Anetie. The project outcome approaches the fact that the majority of the Portuguese market players has disadvantages in size and does rarely coordinate activities among each other, which hinders them to export successfully on a broad scale. To bring together Portuguese delivery potential and German market demand, expert interviews were conducted. Based on the findings, a concept was developed to overcome the domestic collaboration issues in order to strengthen the national exports in the identified sector - embedded systems implementation services for machinery and equipment companies.

Shrinking shrinkage:How and why is fruit shrinkage being caused in Sonaemc's convenience stores? Finding opportunities of improvement envisioning its optimization

This work project regards a challenge presented by a Portuguese organization on the retail sector, SONAEMC, which is a case study of how and why fruit shrinkage occurs in the fruit supply chain within their convenience stores. A qualitative research methodology enabled to infer in which stages throughout the chain shrinkage’s causes occur and, to conclude that internal rules for procedures and processes are not always followed and whose compliance would be enough to reduce fruit shrinkage. The key conclusion is that if fruit stock loss is reduced by as much as 15% the category’s profitability could increase about 8%.

Technical optimization of the synthesis of flavours

The goal of this thesis is the investigation and optimization of the synthesis of potential fragrances. This work is projected as collaboration between the University of Applied Sciences in Merseburg and the company Miltitz Aromatics GmbH in Bitterfeld‐Wolfen (Germany). Flavoured compounds can be synthesized in different ways and by various methods. In this work, methods like the phase transfer catalysis and the Cope‐rearrangement were investigated and applied, for getting a high yield and quantity of the desired substances and without any by‐products or side reactions. This involved the study of syntheses with different process parameters such as temperature, solvent, pressure and reaction time. The main focus was on Cope‐rearrangement, which is a common method in the synthesis of new potential fragrance compounds. The substances synthesized in this work have a hepta‐1,5‐diene‐structure and that is why they can easily undergo this [3,3]‐sigma tropic rearrangement. The lead compound of all research was 2,5‐dimethyl‐2‐vinyl‐4‐hexenenitrile (Neronil). Neronil is synthesized by an alkylation of 2‐methyl‐3‐butenenitrile with prenylchloride under basic conditions in a phase‐transfer system. In this work the yield of isolated Neronil is improved from about 35% to 46% by according to the execution conditions of the reaction. Additionally the amount of side product was decreased. This synthesized hexenenitrile involved not only the aforementioned 1,5‐diene‐structure, but also a cyano group, that makes this structure a suitable base for the synthesis of new potential fragrance compounds. It was observed that Neronil can be transferred into 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid by a hydrolysis under basic conditions. After five hours the acid can be obtained with a yield of 96%. The following esterification is realized with isobutanol to produce 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid isobutyl ester with quantitative conversion. It was observed that the Neronil and the corresponding ester can be converted into the corresponding Cope‐product, with a conversion of 30 % and 80%. Implementing the Cope‐rearrangement, the acid was heated and an unexpected decarboxylated product is formed. To achieve the best verification of reaction development and structure, scrupulous analyses were done using GC‐MS, 1H‐NMR and 13C‐ NMR.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.