72 resultados para feature descriptor
Resumo:
Nowadays, authentication studies for paintings require a multidisciplinary approach, based on the contribution of visual features analysis but also on characterizations of materials and techniques. Moreover, it is important that the assessment of the authorship of a painting is supported by technical studies of a selected number of original artworks that cover the entire career of an artist. This dissertation is concerned about the work of modernist painter Amadeo de Souza-Cardoso. It is divided in three parts. In the first part, we propose a tool based on image processing that combines information obtained by brushstroke and materials analysis. The resulting tool provides qualitative and quantitative evaluation of the authorship of the paintings; the quantitative element is particularly relevant, as it could be crucial in solving authorship controversies, such as judicial disputes. The brushstroke analysis was performed by combining two algorithms for feature detection, namely Gabor filter and Scale Invariant Feature Transform. Thanks to this combination (and to the use of the Bag-of-Features model), the proposed method shows an accuracy higher than 90% in distinguishing between images of Amadeo’s paintings and images of artworks by other contemporary artists. For the molecular analysis, we implemented a semi-automatic system that uses hyperspectral imaging and elemental analysis. The system provides as output an image that depicts the mapping of the pigments present, together with the areas made using materials not coherent with Amadeo’s palette, if any. This visual output is a simple and effective way of assessing the results of the system. The tool proposed based on the combination of brushstroke and molecular information was tested in twelve paintings obtaining promising results. The second part of the thesis presents a systematic study of four selected paintings made by Amadeo in 1917. Although untitled, three of these paintings are commonly known as BRUT, Entrada and Coty; they are considered as his most successful and genuine works. The materials and techniques of these artworks have never been studied before. The paintings were studied with a multi-analytical approach using micro-Energy Dispersive X-ray Fluorescence spectroscopy, micro-Infrared and Raman Spectroscopy, micro-Spectrofluorimetry and Scanning Electron Microscopy. The characterization of Amadeo’s materials and techniques used on his last paintings, as well as the investigation of some of the conservation problems that affect these paintings, is essential to enrich the knowledge on this artist. Moreover, the study of the materials in the four paintings reveals commonalities between the paintings BRUT and Entrada. This observation is supported also by the analysis of the elements present in a photograph of a collage (conserved at the Art Library of the Calouste Gulbenkian Foundation), the only remaining evidence of a supposed maquete of these paintings. The final part of the thesis describes the application of the image processing tools developed in the first part of the thesis on a set of case studies; this experience demonstrates the potential of the tool to support painting analysis and authentication studies. The brushstroke analysis was used as additional analysis on the evaluation process of four paintings attributed to Amadeo, and the system based on hyperspectral analysis was applied on the painting dated 1917. The case studies therefore serve as a bridge between the first two parts of the dissertation.
Resumo:
Learning novel actions and skills is a prevalent ability across multiple species and a critical feature for survival and competence in a constantly changing world. Novel actions are generated and learned through a process of trial and error, where an animal explores the environment around itself, generates multiple patterns of behavior and selects the ones that increase the likelihood of positive outcomes. Proper adaptation and execution of the selected behavior requires the coordination of several biomechanical features by the animal. Cortico-basal ganglia circuits and loops are critically involved in the acquisition, learning and consolidation of motor skills.(...)
Resumo:
The income support programs are created with the purpose of fighting both, the poverty trap and the inactivity trap. The balance between both is fragile and hard to find. Thus, the goal of this work is to contribute to solve this issue by finding how income support programs, particularly the Portuguese RSI, affect transitions to employment. This is made through duration analysis, namely using Cox and Competing Risks models. A particular feature is introduced in this work as it incorporates the possibility of Defective Risks. The estimated hazard elasticity with respect to the amount of RSI received for individuals who move to employment is -0,41. More than a half of RSI receivers stays for more than a year and the probability of never leaving to employment is 44%. The results appear to indicate that RSI has affected negatively transitions to employment.
Resumo:
RESUMO: Introdução: Ao fenómeno do envelhecimento está associado uma maior incidência de doenças crónicas e incapacitantes. Atualmente é consensual, a preocupação com a Qualidade de Vida (QdV) nesta faixa etária, acrescendo importância quando falamos em QdV em demência, dada a complexidade dos sintomas, morbilidades e co-morbilidades que se verificam nesta síndrome. Objetivo: O presente estudo tem como objetivo principal avaliar a perceção da QdV em pessoas com demência, seus familiares e cuidadores profissionais, de forma a identificar dimensões que mereçam uma maior atenção na definição de programas de intervenção em situação de institucionalização. Metodologia: Este estudo é de caráter descritivo transversal com componente qualitativa e quantitativa. A população compreende as pessoas com demência do Centro Psicogeriátrico Nª Sª de Fátima (CPNSF). A amostra foi constituída pelas residentes do CPNSF com diagnóstico de demência e classificação total de Mini Mental State Examination (MMSE) ≥ 10. As variáveis em análise foram: QdV, avaliada pela escala QOL-AD versão portuguesa, perfil sociodemográfico das pessoas com demência, familiares e cuidadores profissionais, por inquérito por questionário; Grau de defeito cognitivo, dependência funcional e sintomatologia depressiva das pessoas com demência, verificado por MMSE, índice de Barthel e Escala de Depressão Geriátrica (GDS-15). Foi ainda acedido ao entendimento pessoal sobre o construto de QdV, através de entrevista semiestruturada dirigida a todos os participantes. Resultados: Com base nos resultados obtidos foi possível determinar que as pessoas com demência, associam QdV a fatores como saúde física, humor/disposição, condições de vida, cognição, família, satisfação com a vida, dinheiro. Foram observadas relações negativas com sintomatologia depressiva e funcionalidade para as atividades instrumentais de vida diária. Os familiares associam positivamente QdV a bem-estar geral relacionado com as dimensões física, psicológica e relações sociais, e negativamente com o estado cognitivo e sintomatologia neuropsiquiátrica. Os cuidadores profissionais associam QdV das pessoas com demência a questões relacionadas com condições e satisfação com a vida, bem-estar físico, suporte emocional relações sociais e funcionalidade para as atividades instrumentais básicas de vida diária. Não foi possível correlacionar a QOL-AD com a dimensão funcionalidade por não existir nesta escala um item que inclua este conceito. Conclusão: Este estudo confirma que pessoas com demência, têm capacidade para aceder e avaliar aspetos da sua própria QdV, sendo que tendem a pontuar com valores mais elevados a sua QdV quando comparados com familiares e cuidadores profissionais.--------------- ABSTRACT:Background:: Aging is associated with higher incidence of chronic and debilitating illnesses. The study of quality of life in aging population has been an increasingly discussed topic. Quality of life in dementia is a particular challenging field given the complexity of symptoms, morbilities and co-morbilities that occur in this syndrome. Objective: This study aims to evaluate the perception of quality of life in elderly people with dementia and their families, in order to identify dimensions that should be prioritized in intervention programs aimed at increasing quality of life in persons with dementia living in institutions. Methodology: This study used a is cross-sectional descriptive mixed methods approach. The population comprises people with dementia in Psychogeriatric Center Nossa Senhora de Fátima (CPNSF). The sample consisted of the residents of CPNSF diagnosed with dementia and total score of Mini Mental State Examination (MMSE) ≥ 10. The variables analyzed were: quality of life, assessed by QOL-AD scale Portuguese version, socio-demographic profile of people with dementia, family members and professional caregivers, by questionnaire survey; Degree of cognitive impairment, functional dependence and depressive symptoms of people with dementia, using respectively MMSE, Barthel index and Geriatric Depression Scale (GDS-15). The personal understanding of the QoL construct was also assessed, through semi-structured interviews to all participants Results: The results supported that people with dementia, related quality of life to factors such as physical health, mood / disposition, living conditions, cognition, family, life satisfaction, and money. Negative relations were observed with depressive symptoms and functionality for the instrumental activities of daily living. The family members associate quality of life positively with overall well-being related to the physical, psychological and social relationships, and negatively with cognitive status and neuropsychiatric symptoms. Professional caregivers associate quality of life of people with dementia-related issues conditions and satisfaction with life, physical well-being, social relationships and emotional support functionality to the basic instrumental activities of daily living. It was not possible to correlate the QOL-AD with the size feature does not exist on this scale for an item that includes this concept. Conclusion: This study supports the idea that people with dementia are able to assess and evaluate aspects of their own quality of life, and tend to rate their quality of life higher than family and professional caregivers.
Resumo:
RESUMO: Na descrição deste estudo foi utilizada a terminologia anatómica da Sociedade Brasileira de Anatomia adaptada ao português por J. A. Esperança-Pina de acordo com o tratado Anatomia Humana da Relação. Os actuais estudos sobre hipoacusia sensorioneural implicam um grupo crescente de situações, em que a lesão se situa ao nível da microvascularização coclear, daí que o conhecimento exacto da angiomorfologia normal se torne essencial na fase actual do conhecimento. A autora tem vindo a estudar, desde 1986, a angiomorfologia do ouvido Interno no modelo experimental, o Cobaio, utilizando várias técnicas microvasculares. sendo dado enfâse particular neste estudo à técnica de microscopia electrónica de varrimento em moldes vasculares. Os animais usados no presente estudo pertencem à espécie cavia porcellus, cobaio, por serem considerados na comunidade cientifica internacional como o melhor modelo experimental para estudo do ouvido interno, pelo facto de a morfologia coclear ser muito semelhante à do Homem e por isso ser um modelo fiável para cirurgia experimental e microdissecção. Este estudo foi realizado em 100 cobaios, cavia porcellus, de ambos os sexos com peso médio de 450g. A vascularização do ouvido interno, no cobaio como no homem, faz-se através dos ramos de divisão da artéria auditiva interna ou labiríntica. A artéria labiríntica origina-se como ramo colateral da artéria cerebelosa ântero-inferior a qual tem origem na artéria basilar ou na artéria vertebral. Embora no homem a artéria auditiva interna possa também destacar-se da artéria basilar e até da artéria vertebral, no cobaio em todos os casos estudados a sua origem verificou-se sempre na artéria cerebelosa ântero-inferior. A artéria labiríntica, ao passar abaixo do meato auditivo interno, divide-se na artéria vestibular anterior e na artéria coclear comum.A artéria vestibular anterior dirige-se para o nervo vestibular, emite vasa nervorum para este nervo e vasculariza o utrículo e os canais semicirculares. A artéria coclear comum origina dois ramos principais, a artéria vestíbulo‑coclear ou vestibular posterior no cobaio, a qual se destaca junto à espira basal da cóclea e a artéria coclear, como ramo terminal, que passa a denominar-se de artéria modiolar ou espiralada, após entrar no modíolo. A artéria modiolar ascende no modíolo promovendo através dos seus ramos colaterais e dos seus ramos terminais a microvascularização coclear, numa vascularização de órgão de tipo terminal. Ao longo do seu trajecto verificou‑se de modo constante uma redução gradual de calibre em cada uma das espiras, por emissão de ramos colaterais, sendo que o calibre da artéria na base da cóclea apresenta um valor que diminui gradualmente até ao ápice. A artéria modiolar origina em todo o seu trajecto ramos colaterais, cujo número diminui em valor absoluto da base para o ápice: Arteríolas radiárias internas, arteríolas de trajecto flexuoso que caminham junto às estruturas sensorioneurais da parede interna da cóclea, junto ao lábio timpânico da lâmina espiral óssea e na parede do próprio modíolo, que se relacionam intimamente com este. As arteríolas radiárias internas originam‑se no flanco da artéria modiolar espiralada. Contam‑se dez a doze em cada espira, extraordinariamente flexuosas desde a sua origem. As arteríolas radiárias internas originam como ramos colaterais, vários grupos de arteríolas de menor calibre, que vascularizam distintas regiões da parede interna da cóclea, as arteríolas do gânglio espiral, a rede espiral interna, as arteríolas de origem dos glomérulos de Schwalbe e a arteríola da lâmina basilar. As arteríolas radiárias externas importantes ramos colaterais da artéria modiolar espiralada promovem a vascularização de importantes estruturas da parede externa. Ao atingir o limite externo do ligamento espiral, as arteríolas radiárias externas dividem‑se em vários ramos arteriolares de menor calibre, ao longo da convexidade do limite externo do ligamento espiral, originando a rede capilar pós-estriada que ocupa a porção lateral do ligamento espiral e a rede capilar ad‑ -estriada, na sua porção mais medial em íntima relação com a estria vascular. A espira basal da cóclea apresenta grande riqueza de vascularização, com características particulares apenas a esta espira, a qual é metabolicamente a mais exigente. A arteríola da janela da cóclea aborda a janela da cóclea pela sua convexidade e divide-se numa rica rede vascular da qual emergem arteríolas pré-capilares que se ramificam em capilares, os quais se dirigem em profundidade penetrando a rampa timpânica da cóclea ao nível da espira basal. Importou neste estudo verificar quais as semelhanças em termos de calibre de estruturas análogas, na parede interna e na parede externa da cóclea, com particular incidência na rede capilar. Do estudo estatístico realizado com testes paramétricos de Tamahane e não paramétricos de Mann-Whitney, verifica-se que comparando todas as estruturas consideradas estas têm calibres diferentes, com excepção dos capilares da estria vascular e do ligamento espiral, pertencentes à parede externa da cóclea que têm calibres iguais aos capilares da rede espiral interna e aos capilares da parede interna da cóclea, dependentes das arteríolas da rede espiral interna. As redes capilares dependentes das arteríolas radiárias internas que vascularizam as estruturas sensorioneurais junto á parede interna do modiolo são em tudo semelhantes em termos de calibre às redes capilares da parede externa da cóclea, incluindo os capilares da estria vascular. Esta particularidade traduz num órgão com vascularização de tipo terminal,um mecanismo de controlo do fluxo sanguíneo coclear tão importante na parede interna como na parede externa da cóclea. ------------ ABSTRACT:Current studies on sensorineural hearing loss, imply a growing group of situations in which the lesion is located at the level of the cochlear microvasculature, hence the exact knowledge of normal angiomorfology becomes essential in current state of knowledge. The author has been studying since 1986, the angiomorfology of inner on the experimental model, the guinea pig, using various microvascular techniques being given particular emphasis in this study to the results of the technique of scanning electron microscopy on corrosion casts. The animals used in this study belong to the species cavia porcellus, guinea pig, to be considered in the international scientific community as the best experimental model for the study of the inner ear, the cochlear morphology is very similar to human and therefore a reliable model for experimental surgery and microdissection. This study was performed in 100 guinea pigs of both sexes with average weight of 450g. There shall be a brief description of embryology, anatomy and cochlear physiology in the light of developmental biology, regarding also the spatial location of the cochlea and the determinism of morphogenetic fields in their development and function. The cochlear transduction mechanism converts the sound wave in stimuli sound and so afferent auditory nerve fibres and deafness are closely related to the cochlear microvasculature. Cochlear ischemia is accompanied by immediate hearing loss. The different type of cochlear injury that leads to sensorineural deafness is well studied in presbycusis where an objective link with the audiometric pattern as been established. The sensory type of deafness, is closely related to the degeneracy of the organ of Corti and damage to the outer hair cells at the basal turn of the cochlea. Keeping in mind cochlear tonotopy with location of high frequency sounds at the level of the base of the cochlea, it explains the audiometric pattern with loss in high frequencies. The neural type of deafness, is characterized by neuronal loss with loss of descendant important neuronal afferents, with audiometric translation on a gradually curve with important loss of auditory discrimination. The metabolic type of deafness results in atrophy of the vascular stria, with consequent change in the potential of the endolymph by decreasing the vascular stria cells and changes in K + recycling mechanism. There is also a change in the morphology of the spiral ligament and the audiometric patern as a flattened curve with loss at all frequencies. Bearing in mind cochlear tonotopy and being characterized all types of sensorineural deafness, we may inquire to what extent the cochlear microvasculature, considering not only the cochlea as a whole but different regions of the inner wall and the outer wall of the cochlea, contributes to deafness. We analysed the entire cochlear morphology on scanning electron microscopy with particular emphasis on bone and membranous cochlea. The inner wall of the cochlea and intramodiolar structures such as the spiral ganglion, the morphology of its cell bodies and their axons are analyzed. The morphology of Corti’s organ is described in detail, with description and large detail of the inner and outer hair cells. Is then presented the study of the microvasculature itself. The spiral modiolar artery is observed with the diaphanization technique and the technique of scanning electron microscopy on corrosion vascular casts. After emergence of collateral branches of the greatest importance, the radiating internal and external arterioles, the modiolar artery gives rise to its terminal branches, the arterioles of the cochear apex. Arterial vasa vasorum and vasa nervorum are displayed with a great detail, which was not yet described in such detail in previous microvascular studies. The arterial radiating arterioles originate in the flank of the spiral modiolar artery in number of ten to twelve in each loop, and they vascularize through their branches the inner wall cochlear sensorineural structures located in the modiolus as the spiral ganglion and structures near the organ of Corti. Their caliber is above 20 μm on the basal turn and in the second loop it decreases to values between 12 and 20 μm, decreasing progressively to the apex of the cochlea.They arise near the modiolus or on their way in the spiral lamina forming vascular loops, and divide without presenting vascular constrictions in their divisions, originating new vascular loops of lower caliber. Internal ratiating arterioles originate as collateral branches several groups of smaller caliber arterioles, which vascularize distinct regions of the inner wall of the cochlea namely, the arterioles of the spiral ganglion, the internal spiral network, the arterioles of origin of the glomeruli of Schwalbe and the arterioles of the basilar membrane. The glomeruli of Schwalbe play an important functional role as relay-stations, in hemodynamic terms, to control the cochlear microvasculature. External radiating arterioles have their origin in the spiral modiolar artery, they are directed towards the outer wall of the cochlea and run through the roof of the scala vestibuli. Above the insertion of Reissner’s membrane on the external wall the external radiating arterioles originate the spiral ligament arterioles, which vascularize the spiral ligament, they divide into several arteriolar branches of smaller caliber, along the convexity of the outer edge of the spiral ligament. The connective tissue of the spiral ligament forms a mesh with supporting function of the highly specialized epithelium, where pericytes were identifiable. Next to its base there is the microvascular network of stria vascularis. The adstriated vascular network which is divided into a capillary network, the capillary network of stria vascularis. The stria vascularis, the only vascularized epithelium of the human body, plays an important role, forming an haemato-labyrintine barrier to assure labyrinthine endocochlear potential and transport of ions, essential for the mechanism of transduction of external hair cells. The cochlear basal turn has a special feature on its external wall, the region of the windows, the round windows giving access to scala tympani and the oval window thatleads into scala vestibuli, and so it is metabolic demanding. For their role in cochlear tonotopy the sensorineural structures and those of the external wall of the cochlea, are particularly vulnerable to hypoxia. Although the complementarity of all the techniques was important for three- -dimensional reconstruction of the microvasculature of the cochlea, the scanning electron microscopy technique, especially when we used the system Semafore was fundamental to perform precise morphometric mesures regarding all vascular structures.Regarding the capillaries of the inner and outer wall of the cochlea networks this technique allowed their characterization in morphometric terms. To conclude the capillaries of the inner wall and of the external wall of the cochlea have similar size. So although located at different cochlear regions, with a different functional role, in cochlear physiology these networks consist of capillaries of similar caliber. It seems to translate a cochlear blood flow control mechanism that is so important in the inner wall as in and the external wall of the cochlea to provide for in inner ear homeosthasia.
Resumo:
Mental health awareness has been rising worldwide, motivated by its social and economic costs. Despite the investment in research in neuroscience in the recent years, little is known about the underlying mechanisms in the brain that are correlated with psychiatric conditions. This project, through two feature articles suitable to be published in magazines, provides perspectives onto mental health research. First it presents an example where psychiatry joins forces with neuroscience and computer science in an interdisciplinary effort to improve the life of those affected by mental disorders. The second article gathers opinions which claim that mental health research priorities should be set by patients themselves, or even that people with lived experience of mental health issues should have an active role in that research. This project was planned and researched while I was an Erasmus student at Nottingham Trent University, in the United Kingdom.
Resumo:
White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.
Resumo:
This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)
Resumo:
Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.
Resumo:
Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.
Resumo:
Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.
Resumo:
Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.