Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Aquaponics and its potential aquaculture wastewater treatment and human urine treatment

The main objective of this thesis is to study the developing fields of aquaponics and its potential for aquaculture wastewater treatment and human urine treatment. Aquaponics is a food production system which combines fish farming (aquaculture) with soilless crop farming (hydroponics). In this thesis the concept of aquaponics and the underlying processes are explained. Research on aquaculture wastewater and human urine wastewater is reviewed and its potential application with aquaponic systems is studied. An overview of the different types of aquaponic systems and current research on the field is also presented. A case study was conducted in a farm in Askeröd, Sweden, which involved building two aquaponic systems (System 1 and System 2) and a human urine-based aquaponic system (System 3), with different degrees of component complexity and sizes. The design, building and monitoring of System 1, System 2 and System 3 was documented and described in detail. Four day experiments were conducted which tested the evolution in concentration of Total Ammonia Nitrogen (NH4+/NH3), Nitrite (NO2-), Nitrate (NO3-), Phosphate (PO43-), and Dissolved Oxygen (O2) after an initial nutrient input. The goal was to assess the concentrations of these parameters after four days and compare them with relevant literature examples in the aquaculture industry and in source-separated urine research. Neither of the two aquaponic systems (System 1 and System 2) displayed all of the parameter concentrations in the last day of testing below reference values found in literature. The best performing of the aquaponic systems was the more complex system (System 2) combining the hydroponic Nutrient Film Technique with a Deep Water Culture component, with a Total Ammonia Nitrogen concentration of 0,20 mg/L, a Nitrite concentration of 0,05 mg/L, a Nitrate concentration of 1,00-5,00 mg/L, a Phosphate concentration of <0,02 mg/L and a Dissolved Oxygen concentration of 8,00 mg/L. The human urine-based aquaponic system (System 3) underperformed in achieving the reference concentration values in literature for most parameters. The removal percentage between the higher recorded values after the input addition and the final day of testing was calculated for two literature examples of separated urine treatment and System 3. The system had a removal percentage of 75% for Total Ammonia Nitrogen, 98% for Nitrite, 25% for Nitrate and 50% for Phosphate. These percentages still underperformed literature examples in most of the tested parameters. The results gathered allowed to conclude that while aquaculture wastewater treatment and human urine treatment is possible with aquaponics systems, overall these did not perform as well as some examples found in recirculating aquaculture systems and source-separated urine treatment literature. However, better measuring techniques, longer testing periods and more research is recommended in this field in order to draw an improved representative conclusion.

Análise não linear do comportamento dinâmico de passadiços pedonais pré-fabricados

Os terramotos têm sido considerados uma das forças mais destrutivas e violentas da natureza, causando grandes tragédias e perdas económicas significativas. O objetivo principal do presente estudo é avaliar o comportamento global e local de três pontes pedonais, pré-fabricadas, durante a ação sísmica regulamentar. Através destas análises, pretende-se avaliar o risco de colapso das estruturas por “descalçamento” do tabuleiro e, caso necessário, propor soluções para evitar este fenómeno e melhorar o desempenho sísmico dos passadiços. No domínio de pontes, o “descalçamento dos apoios” é um tipo de rotura que pode ocorrer em estruturas com tramos simplesmente apoiados, onde os problemas surgem geralmente na interface de ligação tabuleiro-pilar, podendo conduzir ao derrubamento do primeiro. Este tipo de ligação é geralmente constituído por um conjunto de varões de aço – ferrolhos, chumbados verticalmente ao capitel do pilar e que atravessam placas de neoprene, ficando instalados no negativo das vigas. A selagem dos varões é normalmente realizada com argamassa de alta resistência. Os problemas que surgem neste tipo de ligação estão associados, a maior parte das vezes, à falta de manutenção e ao insuficiente comprimento de entrega do tabuleiro na zona dos aparelhos de apoio. A simulação do comportamento da estrutura durante as várias fases construtivas e aplicação de cargas, até ao colapso total, implica a utilização de uma ferramenta adequada. A modelação numérica foi efetuada com recurso ao programa de cálculo não-linear de estruturas Extreme Loading for Structures, baseado no Método dos Elementos Aplicados. O método considera os efeitos da não-linearidade física e geométrica, permitindo analisar o comportamento das estruturas durante a fase elástica e inelástica, passando pela cedência das armaduras, abertura e propagação de fendas até à separação dos elementos. Com base neste trabalho, foi possível verificar alterações significativas na resposta sísmica da estrutura, nomeadamente devido à eventual degradação dos ferrolhos.

Options and Requirements for a potential market entry into Portugal with renewable energy technologies that are applicable for heating and cooling of buildings

NSBE-UNL

Monotherapy and combined therapy of new potential antitumor compounds: antiproliferative activities and biological targets

Review article Martins, P., Marques, M., Coito, L., Pombeiro, A.J.L., Baptista, P.V., Fernandes, A.R. 2014. Organometallic Compounds in Cancer Therapy: Past Lessons and Future Directions. Anti-cancer Agents in Medicinal Chemistry 14. PMID: 25173559

Soldadura por fricção linear assistida por corrente eléctrica das ligas AA 6082-T6 a Ti6Al4V

A ligação dissimilar de ligas de alumínio a ligas de titânio tem elevado potencial para aplicações nas indústrias aeroespacial, automóvel e naval, devido à sua baixa razão peso/resistência mecânica. Contudo, soldar ligas de alumínio a ligas de titânio apresenta-se como um grande desafio, principalmente devido à formação de fases intermetálicas frágeis que têm um efeito negativo nas propriedades mecânicas da junta. Neste estudo, foram realizadas ligações dissimilares das ligas AA6082-T6 a Ti6Al4V, por Fricção Linear assistida por Corrente Eléctrica. Para a utilização de corrente eléctrica na Soldadura por Fricção Linear foram desenvolvidas, produzidas e testadas duas novas ferramentas. A estrutura da ligação foi analisada, por microscopia óptica e electrónica de varrimento. Controlando os parâmetros de soldadura foi possível obter soldaduras topo a topo e sobrepostas com um bom aspecto superficial e com continuidade metálica na interface. Nas ligações topo-a-topo observaram-se defeitos na raiz do cordão. As estruturas na zona soldada dependem fortemente da posição do pino em relação à interface. O uso da corrente eléctrica permitiu reduzir os defeitos na raiz, como vazios e falta de ligação na mesma, sem afectar as características metalúrgicas da interface. A utilização da corrente eléctrica permite aumentar a viscoplasticidade do material e facilitar a deformação plástica à volta do pino.

Genetic and functional analysis of the bacillus subtilis BSP1 gam cluster

Mannans (linear mannan, glucomannan, galactomannan and galactoglucomannan) are the major constituents of the hemicellulose fraction in softwoods and show great importance as a renewable resource for fuel or feedstock applications. As complex polysaccharides, mannans can only be degraded through a synergistic action of different mannan-degrading enzymes, mannanases. Microbial mannanases are mainly extracellular enzymes that can act in wide range of pH and temperature, contributing to pulp and paper, pharmaceutical, food and feed, oil and textile successful industrial applications. Knowing and controlling these microbial mannan-degrading enzymes are essential to take advantage of their great biotechnological potential. The genome of the laboratory 168 strain of Bacillus subtilis carries genes gmuA-G dedicated to the degradation and utilization of glucomannan, including an extracellular -mannanase. Recently, the genome sequence of an undomesticated strain of B. subtilis, BSP1, was determined. In BSP1, the gmuA-G operon is maintained, interestingly, however, a second cluster of genes was found (gam cluster), which comprise a second putative extracellular β-mannanase, and most likely specify a system for the degradation and utilization of a different mannan polymer, galactoglucomannan. The genetic organization and function of the gam cluster, and whether its presence in BSP1 strain results in new hemicellulolytic capabilities, compared to those of the laboratory strain, was address in this work. In silico and in vivo mRNA analyses performed in this study revealed that the gam cluster, comprising nine genes, is organized and expressed in at least six different transcriptional units. Furthermore, cloning, expression, and production of Bbsp2923 in Escherichia coli was achieved and preliminary characterization shows that the enzyme is indeed a β-mannanase. Finally, the high hemicellulolytic capacity of the undomesticated B. subtilis BSP1, demonstrated in this work by qualitative analyses, suggests potential to be used in the food and feed industries.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.

Modelação não linear de estruturas metálicas e mistas em situação de incêndio no software OpenSees

Os incêndios em edifícios representam um fenómeno que pode ter consequências devastadoras quando não controlado, não só em termos de perdas de vidas humanas, como em termos económicos. No passado, a ocorrência de incêndios de grandes dimensões mostrou os efeitos do fogo descontrolado nos edifícios, assim como a ineficiência dos meios de segurança ativa ao fogo. Nas últimas duas décadas, estas questões motivaram o estudo e compreensão da ação dos incêndios nas estruturas dos edifícios. Neste trabalho estuda-se a modelação da ação do fogo em estruturas metálicas e mistas, com o objetivo de contribuir para a sua melhor caracterização. A presente tese foca-se na validação e compreensão da implementação de análises termo-mecânicas a estruturas mistas no software de elementos finitos OpenSees (Open System for Earthquake Engineering Simulation), contribuindo assim para futuros estudos, não só de análises de estruturas mistas sujeitas a incêndio, mas também de análises de estruturas mistas sujeitas a eventos consecutivos, como sismo seguido de incêndio. Neste trabalho é feita uma breve descrição do fenómeno fogo, assim como dos processos inerentes à dinâmica de um incêndio que constituem uma fonte de incerteza para a modelação de cenários de incêndio num edifício. Posto isto, são abordados alguns modelos de incêndios presentes nos Eurocódigos, assim como o recente modelo de fogos móveis(“Travelling fires”). São realizados exemplos de aplicação no software e dois casos de estudo. O primeiro consiste na modelação de dois ensaios ao fogo realizados na Alemanha em 1986 em estruturas metálicas à escala 1/4. O segundo consiste na modelação de um ensaio ao fogo a uma viga de betão armado simplesmente apoiada, realizado no Instituto Superior Técnico em 2010. Os modelos numéricos desenvolvidos no OpenSees contabilizam as não linearidades físicas e geométricas, com elementos finitos de plasticidade distribuída e com uma formulação baseada em deslocamentos. Os resultados numéricos são então comparados com os experimentais, de modo a validar as análises termo-mecânicas no OpenSees.

Desenvolvimento experimental e simulação numérica em soldadura por fricção linear assistida por corrente elétrica

A soldadura por fricção linear (SFL) é um processo de ligação no estado sólido com capacidade para soldar materiais dissimilares e ligas metálicas de baixa soldabilidade. Contudo, nas juntas soldadas com uma configuração topo-a-topo é possível o aparecimento de defeitos na raiz do cordão, nomeadamente, de falta de penetração e de alinhamentos de óxidos. Estes defeitos são responsáveis pela diminuição da resistência mecânica das juntas, sobretudo quando sujeitas a esforços de fadiga. Existem variantes do processo para eliminar este tipo de defeitos, no entanto, verificam-se algumas dificuldades tecnológicas e a competitividade do processo é afetada. No âmbito deste trabalho desenvolveu-se uma variante do processo designado soldadura por fricção linear assistida por corrente elétrica (SFLAE). Esta variante consiste em introduzir uma corrente elétrica de elevada intensidade na zona da raiz do cordão, por forma a que o calor gerado por efeito de Joule aqueça o material e aumente o fluxo visco-plástico nessa zona, tendo em vista atenuar ou eliminar os defeitos na raiz. Foram concebidas e produzidas ferramentas de SFL dedicadas, melhorado um modelo analítico do processo, realizadas simulações numéricas para permitir compreender alguns fenómenos físicos envolvidos no processo, e realizados ensaios experimentais de validação. A análise aos cordões permitiu observar uma diminuição da espessura dos defeitos na raiz em três ensaios realizados na liga AA1100 e AA6084-T6 usando intensidades de corrente de 300 A. Dos resultados de microdureza e de medição de condutividade elétrica é possível concluir que a microestrutura do material não é significativamente alterada pela passagem de corrente elétrica.

Diffusional kurtosis imaging using a fast heuristic constrained linear least squares algorithm: a plugin for OsiriX

Diffusion Kurtosis Imaging (DKI) is a fairly new magnetic resonance imag-ing (MRI) technique that tackles the non-gaussian motion of water in biological tissues by taking into account the restrictions imposed by tissue microstructure, which are not considered in Diffusion Tensor Imaging (DTI), where the water diffusion is considered purely gaussian. As a result DKI provides more accurate information on biological structures and is able to detect important abnormalities which are not visible in standard DTI analysis. This work regards the development of a tool for DKI computation to be implemented as an OsiriX plugin. Thus, as OsiriX runs under Mac OS X, the pro-gram is written in Objective-C and also makes use of Apple’s Cocoa framework. The whole program is developed in the Xcode integrated development environ-ment (IDE). The plugin implements a fast heuristic constrained linear least squares al-gorithm (CLLS-H) for estimating the diffusion and kurtosis tensors, and offers the user the possibility to choose which maps are to be generated for not only standard DTI quantities such as Mean Diffusion (MD), Radial Diffusion (RD), Axial Diffusion (AD) and Fractional Anisotropy (FA), but also DKI metrics, Mean Kurtosis (MK), Radial Kurtosis (RK) and Axial Kurtosis (AK).The plugin was subjected to both a qualitative and a semi-quantitative analysis which yielded convincing results. A more accurate validation pro-cess is still being developed, after which, and with some few minor adjust-ments the plugin shall become a valid option for DKI computation

Determinants of mother-baby relationship evaluated during pregnancy

ABSTRACT Background Mental health promotion is supported by a strong body of knowledge and is a matter of public health with the potential of a large impact on society. Mental health promotion programs should be implemented as soon as possible in life, preferably starting during pregnancy. Programs should focus on malleable determinants, introducing strategies to reduce risk factors or their impact on mother and child, and also on strengthening protective factors to increase resilience. The ambition of early detecting risk situations requires the development and use of tools to assess risk, and the creation of a responsive network of services based in primary health care, especially maternal consultation during pregnancy and the first months of the born child. The number of risk factors and the way they interact and are buffered by protective factors are relevant for the final impact. Maternal-fetal attachment (MFA) is not yet a totally understood and well operationalized concept. Methodological problems limit the comparison of data as many studies used small size samples, had an exploratory character or used different selection criteria and different measures. There is still a lack of studies in high risk populations evaluating the consequences of a weak MFA. Instead, the available studies are not very conclusive, but suggest that social support, anxiety and depression, self-esteem and self-control and sense of coherence are correlated with MFA. MFA is also correlated with health practices during pregnancy, that influence pregnancy and baby outcomes. MFA seems a relevant concept for the future mother baby interaction, but more studies are needed to clarify the concept and its operationalization. Attachment is a strong scientific concept with multiple implications for future child development, personality and relationship with others. Secure attachment is considered an essential basis of good mental health, and promoting mother-baby interaction offers an excellent opportunity to intervention programmes targeted at enhancing mental health and well-being. Understanding the process of attachment and intervening to improve attachment requires a comprehension of more proximal factors, but also a broader approach that assesses the impact of more distal social conditions on attachment and how this social impact is mediated by family functioning and mother-baby interaction. Finally, it is essential to understand how this knowledge could be translated in effective mental health promoting interventions and measures that could reach large populations of pregnant mothers and families. Strengthening emotional availability (EA) seems to be a relevant approach to improve the mother-baby relationship. In this review we have offered evidence suggesting a range of determinants of mother-infant relationship, including age, marital relationship, social disadvantages, migration, parental psychiatric disorders and the situations of abuse or neglect. Based on this theoretical background we constructed a theoretical model that included proximal and distal factors, risk and protective factors, including variables related to the mother, the father, their social support and mother baby interaction from early pregnancy until six months after birth. We selected the Antenatal Psychosocial Health Assessment (ALPHA) for use as an instrument to detect psychosocial risk during pregnancy. Method Ninety two pregnant women were recruited from the Maternal Health Consultation in Primary Health Care (PHC) at Amadora. They had three moments of assessment: at T1 (until 12 weeks of pregnancy) they filed out a questionnaire that included socio-demographic data, ALPHA, Edinburgh post-natal Depression Scale (EDPS), General Health Questionnaire (GHQ) and Sense of Coherence (SOC); at T2 (after the 20th weeks of pregnancy) they answered EDPS, SOC and MFA Scale (MFAS), and finally at T3 (6 months after birth), they repeated EDPS and SOC, and their interaction with their babies was videotaped and later evaluated using EA Scales. A statistical analysis has been done using descriptive statistics, correlation analysis, univariate logistic regression and multiple linear regression. Results The study has increased our knowledge on this particular population living in a multicultural, suburb community. It allow us to identify specific groups with a higher level of psychosocial risk, such as single or divorced women, young couples, mothers with a low level of education and those who are depressed or have a low SOC. The hypothesis that psychosocial risk is directly correlated with MFAS and that MFA is directly correlated with EA was not confirmed, neither the correlation between prenatal psychosocial risk and mother-baby EA. The study identified depression as a relevant risk factor in pregnancy and its higher prevalence in single or divorced women, immigrants and in those who have a higher global psychosocial risk. Depressed women have a poor MFA, and a lower structuring capacity and a higher hostility to their babies. In average, depression seems to reduce among pregnant women in the second part of their pregnancy. The children of immigrant mothers show a lower level of responsiveness to their mothers what could be transmitted through depression, as immigrant mothers have a higher risk of depression in the beginning of pregnancy and six months after birth. Young mothers have a low MFA and are more intrusive. Women who have a higher level of education are more sensitive and their babies showed to be more responsive. Women who are or have been submitted to abuse were found to have a higher level of MFA but their babies are less responsive to them. The study highlights the relevance of SOC as a potential protective factor while it is strongly and negatively related with a wide range of risk factors and mental health outcomes especially depression before, during and after pregnancy. Conclusions ALPHA proved to be a valid, feasible and reliable instrument to Primary Health Care (PHC) that can be used as a total sum score. We could not prove the association between psychosocial risk factors and MFA, neither between MFA and EA, or between psychosocial risk and EA. Depression and SOC seems to have a clear and opposite relevance on this process. Pregnancy can be considered as a maturational process and an opportunity to change, where adaptation processes occur, buffering risk, decreasing depression and increasing SOC. Further research is necessary to better understand interactions between variables and also to clarify a better operationalization of MFA. We recommend the use of ALPHA, SOC and EDPS in early pregnancy as a way of identifying more vulnerable women that will require additional interventions and support in order to decrease risk. At political level we recommend the reinforcement of Immigrant integration and the increment of education in women. We recommend more focus in health care and public health in mental health condition and psychosocial risk of specific groups at high risk. In PHC special attention should be paid to pregnant women who are single or divorced, very young, low educated and to immigrant mothers. This study provides the basis for an intervention programme for this population, that aims to reduce broad spectrum risk factors and to promote Mental Health in women who become pregnant. Health and mental health policies should facilitate the implementation of the suggested measures.

Groundwater quality, vulnerability and potential assessment in Kobo Valley development project, Ethiopia

This study deals with investigating the groundwater quality for irrigation purpose, the vulnerability of the aquifer system to pollution and also the aquifer potential for sustainable water resources development in Kobo Valley development project. The groundwater quality is evaluated up on predicting the best possible distribution of hydrogeochemicals using geostatistical method and comparing them with the water quality guidelines given for the purpose of irrigation. The hydro geochemical parameters considered are SAR, EC, TDS, Cl-, Na+, Ca++, SO4 2- and HCO3 -. The spatial variability map reveals that these parameters falls under safe, moderate and severe or increasing problems. In order to present it clearly, the aggregated Water Quality Index (WQI) map is constructed using Weighted Arithmetic Mean method. It is found that Kobo-Gerbi sub basin is suffered from bad water quality for the irrigation purpose. Waja Golesha sub-basin has moderate and Hormat Golena is the better sub basin in terms of water quality. The groundwater vulnerability assessment of the study area is made using the GOD rating system. It is found that the whole area is experiencing moderate to high risk of vulnerability and it is a good warning for proper management of the resource. The high risks of vulnerability are noticed in Hormat Golena and Waja Golesha sub basins. The aquifer potential of the study area is obtained using weighted overlay analysis and 73.3% of the total area is a good site for future water well development. The rest 26.7% of the area is not considered as a good site for spotting groundwater wells. Most of this area fall under Kobo-Gerbi sub basin.

A model to screen and improve business potential of micro and small enterprises in developing countries: Evidence from the Island of Mozambique

Programmes supporting micro and small enterprises in developing countries have been showing that capital is not enough to allow business success: survival and growth. Literature does not provide comprehensive and practical tool to support business development in this context, but allowed the collection of forty-nine success variables that were studied in a sample of successful and unsuccessful businesses in the Island of Mozambique to discover what were the key factors affecting those businesses’ performance. Empirical data gave the insights for the development of a model to screen and improve business potential of micro and small enterprises in this context.