Reporting Income Taxes in the Banking Sector In Angola - Accounting, Tax Regulation and Financial Reporting Evidences

This research provides an insight into income taxes reporting in Angola, based on hand collected data from the annual reports of banks. Empirical studies on Angolan companies are scarce, in part due to the limited access to data. The results show that income taxes’ reporting has improved over the years 2010-2013, becoming more reliable and understandable. The Angolan Government is boosting the economic growth through tax benefits in the investment in public debt, which cause a reduction in the banks’ effective tax rate. The new income tax law will reduce the statutory tax rate from 2015 onwards and change the taxable income, resulting in shifting the focus to promoting private investment.

Characterization of an OPCPA laser amplifier based on the nonlinear crystal YCOB

The work described in this thesis was performed at the Laboratory for Intense Lasers (L2I) of Instituto Superior Técnico, University of Lisbon (IST-UL). Its main contribution consists in the feasibility study of the broadband dispersive stages for an optical parametric chirped pulse amplifier based on the nonlinear crystal yttrium calcium oxi-borate (YCOB). In particular, the main goal of this work consisted in the characterization and implementation of the several optical devices involved in pulse expansion and compression of the amplified pulses to durations of the order of a few optical cycles (20 fs). This type of laser systems find application in fields such as medicine, telecommunications and machining, which require high energy, ultrashort (sub-100 fs) pulses. The main challenges consisted in the preliminary study of the performance of the broadband amplifier, which is essential for successfully handling pulses with bandwidths exceeding 100 nm when amplified from the μJ to 20 mJ per pulse. In general, the control, manipulation and characterization of optical phenomena on the scale of a few tens of fs and powers that can reach the PW level are extremely difficult and challenging due to the complexity of the phenomena of radiation-matter interaction and their nonlinearities, observed at this time scale and power level. For this purpose the main dispersive components were characterized in detail, specifically addressing the demonstration of pulse expansion and compression. The tested bandwidths are narrower than the final ones, in order to confirm the parameters of these elements and predict the performance for the broadband pulses. The work performed led to additional tasks such as a detailed characterization of laser oscillator seeding the laser chain and the detection and cancelling of additional sources of dispersion.

Structural connectivity based on diffusion Kurtosis imaging

Structural connectivity models based on Diffusion Tensor Imaging (DTI) are strongly affected by the technique’s inability to resolve crossing fibres, either intra- or inter-hemispherical connections. Several models have been proposed to address this issue, including an algorithm aiming to resolve crossing fibres which is based on Diffusion Kurtosis Imaging (DKI). This technique is clinically feasible, even when multi-band acquisitions are not available, and compatible with multi-shell acquisition schemes. DKI is an extension of DTI enabling the estimation of diffusion tensor and diffusion kurtosis metrics. In this study we compare the performance of DKI and DTI in performing structural brain connectivity. Six healthy subjects were recruited, aged between 25 and 35 (three females). The MRI experiments were performed using a 3T Siemens Trio with a 32-channel head coil. The scans included a T1-weighted sequence (1mm3), and a DWI with b-values 0, 1000 and 2000 s:mm

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

The burden of chronic low back pain in the adult Portuguese population : an epidemiological population-based study under the scope of Epireumapt

RESUMO: Nos países desenvolvidos a lombalgia é a condição músculo-­‐esquelética mais prevalente. Quando evolui para um quadro crónico é responsável por um encargo económico bastante considerável, não só em relação aos indivíduos, mas também para a sociedade. A lombalgia crónica é por isso uma das principais causas de perda de produtividade e de perda de independência económica, nomeadamente através do absenteísmo (ausência do trabalho), do presenteísmo (perda de produtividade no trabalho, devido à capacidade diminuída provocada pela lombalgia) e da incapacidade para trabalhar (invalidez permanente, total ou parcial). Até à data, em Portugal, a prevalência e carga social da lombalgia crónica eram desconhecidas. Até agora não existiam estudos populacionais de grande dimensão sobre este tema. O objetivo principal desta tese foi determinar a prevalência de lombalgia crónica, e também avaliar a carga social que esta tem na população adulta Portuguesa. O trabalho de investigação foi desenvolvido no âmbito do Estudo Epidemiológico de Doenças Reumáticas em Portugal (EpiReumaPt). Este foi o primeiro estudo de larga escala e de base populacional, que determinou a prevalência de doenças reumáticas e músculo-­‐ esqueléticas na população adulta portuguesa. Foi realizado numa amostra aleatória e representativa, de 10.661 indivíduos do Continente, da Região Autónoma dos Açores e da Região Autónoma da Madeira, entre Setembro de 2011 e Dezembro de 2013. Esta tese foi dividida em duas secções. A primeira secção incluiu o detalhe das questões relativas ao desenvolvimento e gestão do EpiReumaPt, constituindo-­‐se como um guia prático sobre como realizar um estudo de base populacional de larga escala, em Portugal. A metodologia detalhada do EpiReumaPt foi também descrita nesta secção e incluiu os objectivos, o desenho do estudo, as características de recrutamento e a preparação de dados para análise. Nesta secção foram ainda descritos os principais resultados do EpiReumaPt. Estes evidenciaram que a lombalgia foi a condição músculo-­‐esquelética com maior prevalência na população adulta portuguesa.A segunda secção desta tese estimou a prevalência da lombalgia crónica ativa na população adulta Portuguesa, e avaliou a carga social esta condição. A lombalgia ativa foi definida com base na dor auto-­‐relatada no dia da entrevista e que persistia há pelo menos 90 dias (independentemente da causa). A lombalgia foi definida como dor na área definida entre a margem inferior das décimas segundas costelas até às pregas glúteas inferiores, com ou sem dor nos membros inferiores. A carga social foi medida tendo em conta os seguintes parâmetros: qualidade de vida, função, consumo de recursos de saúde, consumo de analgésicos e outros fármacos usados no alívio da dor, sintomas de ansiedade e sintomas de depressão. Os resultados mostraram que o consumo de recursos em saúde e a carga social da lombalgia crónica na população adulta Português é significativa. Também a incapacidade causada pela lombalgia crónica,nos indivíduos com idade ativa, é responsável por elevadas taxas de absenteísmo e má qualidade de vida, aos quais acresce o consequente ónus socioeconómico. Esta tese também concluiu que o consumo de analgésicos e outros medicamentos para alívio da dor, na população adulta portuguesa com lombalgia crónica ativa, é relativamente baixa. A maioria destes indivíduos não tomava nenhum medicamento analgésico, independentemente da intensidade da dor. Mesmo os indivíduos que reportaram dor intensa, apenas 4.0% estavam no primeiro degrau da escada analgésica da Organização Mundial de Saúde; 2.3% usavam opióides fracos e 0.03% usavam opióides fortes para controlar a dor (segundo e terceiro degrau da escada analgésica da Organização Mundial da Saúde). O trabalho de investigação também confirmou que a prevalência de sintomas de ansiedade e depressão entre os indivíduos adultos portugueses com lombalgia crónica ativa é elevada. Nestes indivíduos, registou-­‐se um consumo mais elevado de analgésicos e outros medicamentos para alívio da dor, quando comparados com os indivíduos com lombalgia crónica activa sem esses sintomas psicológicos. Os grupos terapêuticos mais utilizados foram os ansiolíticos, sedativos e hipnóticos, os antidepressivos e os anti-­‐inflamatórios não esteróides. A intensidade média da dor reportada foi também maior entre os indivíduos com lombalgia ativa e sintomas de ansiedade e/ou depressão. Também nestes, foi reportada pior função e pior estado de saúde. Em relação ao consumo de recursos de saúde foram encontradas diferenças significativas entre as duas populações: os indivíduos com lombalgia ativa e sintomas psicológicos concomitantes registaram maior número de consultas de psiquiatria de outras especialidades médicas, assim como precisaram de mais apoio domiciliário nos 12 meses prévios à entrevista do EpiReumaPt. Foram também identificados os fatores associados a sintomas isolados de ansiedade, a sintomas isolados de depressão e a sintomas de ansiedade e depressão. Resumindo,esta tese permitiu concluir que a lombalgia crónica é um problema de saúde comum na população adulta portuguesa, contribuindo para um elevado grau de incapacidade e que consequentemente afeta o desempenho laboral e o bem-­‐estar dos indivíduos. A lombalgia crónica é também responsável por um consumo considerável de recursos de saúde. Acresce ainda que os sintomas de ansiedade e depressão são comuns, entre os indivíduos com lombalgia crónica, contribuindo com uma carga social adicional.---------------------------------- ABSTRACT:Low Back Pain(LBP) is the most prevalent of musculoskeletal condition in developed countries.When it becomes chronic, LBP causesan enormous economic burden on individuals and society -­‐ it is one of the leading causes of loss of productivity and economic independence through absenteeism (time off work), presenteeism (lost productivity because of diminished capacity while at work) and work disability (permanent, partial or complete disablement for work purposes). In Portugal the prevalence and burden of LBP and chronic LBP (CLBP) were poorly defined. Until now no large population-­‐based studies have focused on this. The main aim of this thesis was to determine the prevalence of LBP and CLBP, and also to assess the burden of CLBP in the adult rtuguese population. The research work was developed under the scope of EpiReumaPt (the Portuguese Epidemiologic Study of Rheumatic Diseases). EpiReumaPt was the first national large population-­‐based and prevalence study of rheumatic and musculoskeletal diseases (RMD). It was performed among a randomized and representative sample of 10,661 adult Portuguese subjects recruited in Mainland, Azores and Madeira Islands, from September 2011 to December 2013. The first section of this thesis included detailed issues regarding the development and management of EpiReumaPt, and provided a practical guide on how to set-­‐up a large population-­‐based study in Portugal. The detailed methodology of EpiReumaPt, including its objectives,study design,recruitment features,and data preparation for analyses were also described. The main results from EpiReumaPt study were provided in this section and showed that LBP was the musculoskeletal condition with highest prevalence among Portuguese population. The second section of this thesis estimated the prevalence of active CLBP among adult Portuguese population, and assessed the social burden of this condition. Active CLBP was defined based on self-­‐reported pain on the day of the interview, and for most of the time for at least 90 days (independently from cause). LBP was defined as pain in the back area from the lower margin of the twelfth ribs to he lower gluteal folds, with or without pain referred to the lower limbs. Social burden was measured taking into account the following outcomes: quality of life, function, healthcare resources consumption, analgesic and other pain relief drugs intake, anxiety and depression symptoms. Results showed that the healthcare consumption and social burden of CLBP among adult Portuguese population were enormous, and the disability caused by CLBP among subjects in a working age provides high rates of absenteeism (work loss) and poor quality of life, with a consequent socioeconomic burden. This thesis also concluded that analgesic and other pain relief drugs untake among adult Portuguese population with active CLBP was very low. Most of the subjects with active CLBP did not take any analgesic drug regardless pain severity. Even when subjects self-­‐reported severe pain, only 24.0% were in the 1st step of the analgesic ladder,2.3% used weak analgesic opioids and 0.03% used strong opioids (2nd and 3rd step of WHO analgesic ladder, respectively) to control pain . The research work also confirmed that the prevalence of anxiety and depression symptoms among adult Portuguese subjects with active CLBP was high. Regarding pharmacological therapy, the intake of analgesic and other pain relief drugs was higher among subjects with anxiety and/or depression symptoms, when compared with subjects without these psychological symptoms. Anxiolytics, sedatives and hypnotics, antidepressants and NSAIDs intake had higher usage rates among these subjects. The pain severity mean was also higher among this subjects and function and health status was worse. Regarding healthcare resources consumption,significant differences between the two populations were found. Subjects with ctive CLBP and concomitant psychological symptoms had a higher number of psychiatrist and other physician visits. They also needed more home care in the previous 12 months. Factors associated with isolated symptoms of anxiety, depression,and concomitant anxiety and depression symptoms were also identified. Summarizing, we concluded that CLBP is a common health problem among adult Portuguese population contributing to disability and affecting labor performance, and the well being of subjects. it is also responsible for considerable healthcare resource consumption. Anxiety and depression symptoms are common among subjects with CLBP and provided an additional burden among them.