Industrial symbiosis potential of the Sines oil refinery – environmental and economic evaluation

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente – Perfil Gestão e Sistemas Ambientais

Social entrepreneurship as a solution provider for ageing societies in Europe

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Musealização da Levada de Tomar: subsídios para a conservação do património industrial da moagem A Portuguesa

Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em (designação da área científica do mestrado)

Argamassa industrial para a reabilitação de rebocos antigos

Argamassas 2014 - I Simpósio de Argamassas e Soluções Térmicas de Revestimento, 5-6 Junho, ITeCons, Universidade de Coimbra

Património industrial e turismo cultural: contributo para a criação de um itinerário turístico no Centro Histórico de Lisboa

Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Práticas Culturais para os Municípios

Service-oriented infrastructure to support the control, monitoring and management of a shop floor system

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Dinâmicas de revitalização de frentes Ribeirinhas no período Pós-Industrial: o Arco Ribeirinho Sul do Estuário do Tejo

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em Geografia e Planeamento Regional

Design and characterization of Chitin- Glucan polymeric structures for wound dressing materials

The main objective of this work was the development of polymeric structures, gel and films, generated from the dissolution of the Chitin-Glucan Complex (CGC) in biocompatible ionic liquids for biomedical applications. Similar as chitin, CGC is only soluble in some special solvents which are toxic and corrosive. Due to this fact and the urgent development of biomedical applications, the need to use biocompatible ionic liquids to dissolve the CGC is indispensable. For the dissolution of CGC, the biocompatible ionic liquid used was Choline acetate. Two different CGC’s, KiOnutrime from KitoZyme and biologically produced CGC from Faculdade de Ciencias e Tecnologia (FCT) - Universidade Nova de Lisboa, were characterized in order to develop biocompatible wound dressing materials. The similar result is shown in term of the ratio of chitin:glucan, which is 1:1.72 for CGC-FCT and 1:1.69 for CGC-Commercial. For the analysis of metal element content, water and inorganic salts content and protein content, both polymers showed some discrepancies, where the content in CGC-FCT is always higher compared to the commercial one. The different characterization results between CGC-FCT and CGC-Commercial could be addressed to differences in the purification method, and the difference of its original strain yeast, whereas CGC-FCT is derived from P.pastoris and the commercial CGC is from A.niger. This work also investigated the effect of biopolymers, temperature dissolution, non-solvent composition on the characteristics of generated polymeric structure with biocompatible ionic liquid. The films were prepared by casting a polymer mixture, immersion in a non-solvent, followed by drying at ambient temperature. Three different non-solvents were tested in phase inversion method, i.e. water, methanol, and glycerol. The results indicate that the composition of non-solvent in the coagulation bath has great influence in generated polymeric structure. Water was found to be the best coagulant for producing a CGC polymeric film structure. The characterizations that have been done include the analysis of viscosity and viscoelasticity measurement, as well as sugar composition in the membrane and total sugar that was released during the phase inversion method. The rheology test showed that both polymer mixtures exhibit a non- Newtonian shear thinning behaviour. Where the viscosity and viscoelasticity test reveal that CGCFCT mixture has a typical behaviour of a viscous solution with entangled polymer chains and CGCCommercial mixture has true gel behaviour. The experimental results show us that the generated CGC solution from choline acetate could be used to develop both polymeric film structure and gel. The generated structures are thermally stable at 100° C, and are hydrophilic. The produced films have dense structure and mechanical stabilities against puncture up to 60 kPa.

Aplicação da metodologia TRIZ e da manutenção autónoma em atividades de manutenção industrial

A manutenção tem ganho cada vez maior importância entre as atividades das empresas industriais. O aumento constante das exigências do mercado motiva os responsáveis pela manutenção a procurarem novas metodologias e técnicas, que permitam melhorar a gestão da manutenção em todas as suas vertentes. A metodologia TRIZ (Teoria de Resolução Inventiva de Problemas) promove a inovação sistemática e a procura de novas soluções para os problemas existentes. Sendo a inovação um conceito da atualidade e bem presente nas empresas que queiram marcar as suas posições no mercado, o uso da metodologia TRIZ é uma boa forma de as empresas se diferenciarem, encontrando novas soluções inovadoras e mais criativas. Este aumento da criatividade poderá proporcionar vantagens em relação à concorrência. Uma das principais caraterísticas da manutenção autónoma é a inclusão de diferentes áreas funcionais das empresas nas atividades da manutenção. Uma das grandes vantagens da manutenção autónoma é a partilha das responsabilidades e conhecimentos entre os técnicos de manutenção e os operadores dos equipamentos. Os operados dos equipamentos ganham com isso a capacidade de realizar algumas operações elementares de manutenção, ajudando na deteção precoce de anomalias, podendo com isto reduzir as paragens e falhas de equipamentos, prolongar a vida útil dos mesmos, tendo por vezes influência direta na qualidade do produto final produzido e na imagem da empresa. O estudo desenvolvido no âmbito da presente dissertação centrou-se nas possibilidades e oportunidades da utilização conjunta da metodologia TRIZ e da manutenção autónoma, em busca de novas formas de solucionar problemas da manutenção. Sendo a combinação destas técnicas ainda pouco explorada, o presente estudo visa abrir novos caminhos em relação à utilização da metodologia TRIZ nos problemas da manutenção. No âmbito desta dissertação foram explorados vários conceitos e ferramentas da metodologia TRIZ para resolver três casos práticos de manutenção industrial.

Application of NMR RDC’s, relaxation and self-diffusion for the study of dynamic processes of small molecules in solution

Spin-lattice Relaxation, self-Diffusion coefficients and Residual Dipolar Couplings (RDC’s) are the basis of well established Nuclear Magnetic Resonance techniques for the physicochemical study of small molecules (typically organic compounds and natural products with MW < 1000 Da), as they proved to be a powerful and complementary source of information about structural dynamic processes in solution. The work developed in this thesis consists in the application of the earlier-mentioned NMR techniques to explore, analyze and systematize patterns of the molecular dynamic behavior of selected small molecules in particular experimental conditions. Two systems were chosen to investigate molecular dynamic behavior by these techniques: the dynamics of ion-pair formation and ion interaction in ionic liquids (IL) and the dynamics of molecular reorientation when molecules are placed in oriented phases (alignment media). The application of NMR spin-lattice relaxation and self-diffusion measurements was applied to study the rotational and translational molecular dynamics of the IL: 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]. The study of the cation-anion dynamics in neat and IL-water mixtures was systematically investigated by a combination of multinuclear NMR relaxation techniques with diffusion data (using by H1, C13 and F19 NMR spectroscopy). Spin-lattice relaxation time (T1), self-diffusion coefficients and nuclear Overhauser effect experiments were combined to determine the conditions that favor the formation of long lived [BMIM][BF4] ion-pairs in water. For this purpose and using the self-diffusion coefficients of cation and anion as a probe, different IL-water compositions were screened (from neat IL to infinite dilution) to find the conditions where both cation and anion present equal diffusion coefficients (8% water fraction at 25 ºC). This condition as well as the neat IL and the infinite dilution were then further studied by 13C NMR relaxation in order to determine correlation times (c) for the molecular reorientational motion using a mathematical iterative procedure and experimental data obtained in a temperature range between 273 and 353 K. The behavior of self-diffusion and relaxation data obtained in our experiments point at the combining parameters of molar fraction 8 % and temperature 298 K as the most favorable condition for the formation of long lived ion-pairs. When molecules are subjected to soft anisotropic motion by being placed in some special media, Residual Dipolar Couplings (RDCs), can be measured, because of the partial alignment induced by this media. RDCs are emerging as a powerful routine tool employed in conformational analysis, as it complements and even outperforms the approaches based on the classical NMR NOE or J3 couplings. In this work, three different alignment media have been characterized and evaluated in terms of integrity using 2H and 1H 1D-NMR spectroscopy, namely the stretched and compressed gel PMMA, and the lyotropic liquid crystals CpCl/n-hexanol/brine and cromolyn/water. The influence that different media and degrees of alignment have on the dynamic properties of several molecules was explored. Different sized sugars were used and their self-diffusion was determined as well as conformation features using RDCs. The results obtained indicate that no influence is felt by the small molecules diffusion and conformational features studied within the alignment degree range studied, which was the 3, 5 and 6 % CpCl/n-hexanol/brine for diffusion, and 5 and 7.5 % CpCl/n-hexanol/brine for conformation. It was also possible to determine that the small molecules diffusion verified in the alignment media presented close values to the ones observed in water, reinforcing the idea of no conditioning of molecular properties in such media.

A solution for estimates in software development projects

The Corporate world is becoming more and more competitive. This leads organisations to adapt to this reality, by adopting more efficient processes, which result in a decrease in cost as well as an increase of product quality. One of these processes consists in making proposals to clients, which necessarily include a cost estimation of the project. This estimation is the main focus of this project. In particular, one of the goals is to evaluate which estimation models fit the Altran Portugal software factory the most, the organization where the fieldwork of this thesis will be carried out. There is no broad agreement about which is the type of estimation model more suitable to be used in software projects. Concerning contexts where there is plenty of objective information available to be used as input to an estimation model, model-based methods usually yield better results than the expert judgment. However, what happens more frequently is not having this volume and quality of information, which has a negative impact in the model-based methods performance, favouring the usage of expert judgement. In practice, most organisations use expert judgment, making themselves dependent on the expert. A common problem found is that the performance of the expert’s estimation depends on his previous experience with identical projects. This means that when new types of projects arrive, the estimation will have an unpredictable accuracy. Moreover, different experts will make different estimates, based on their individual experience. As a result, the company will not directly attain a continuous growing knowledge about how the estimate should be carried. Estimation models depend on the input information collected from previous projects, the size of the project database and the resources available. Altran currently does not store the input information from previous projects in a systematic way. It has a small project database and a team of experts. Our work is targeted to companies that operate in similar contexts. We start by gathering information from the organisation in order to identify which estimation approaches can be applied considering the organization’s context. A gap analysis is used to understand what type of information the company would have to collect so that other approaches would become available. Based on our assessment, in our opinion, expert judgment is the most adequate approach for Altran Portugal, in the current context. We analysed past development and evolution projects from Altran Portugal and assessed their estimates. This resulted in the identification of common estimation deviations, errors, and patterns, which lead to the proposal of metrics to help estimators produce estimates leveraging past projects quantitative and qualitative information in a convenient way. This dissertation aims to contribute to more realistic estimates, by identifying shortcomings in the current estimation process and supporting the self-improvement of the process, by gathering as much relevant information as possible from each finished project.

Context-based identification of energy consumption in industrial plants

Nowadays, reducing energy consumption is one of the highest priorities and biggest challenges faced worldwide and in particular in the industrial sector. Given the increasing trend of consumption and the current economical crisis, identifying cost reductions on the most energy-intensive sectors has become one of the main concerns among companies and researchers. Particularly in industrial environments, energy consumption is affected by several factors, namely production factors(e.g. equipments), human (e.g. operators experience), environmental (e.g. temperature), among others, which influence the way of how energy is used across the plant. Therefore, several approaches for identifying consumption causes have been suggested and discussed. However, the existing methods only provide guidelines for energy consumption and have shown difficulties in explaining certain energy consumption patterns due to the lack of structure to incorporate context influence, hence are not able to track down the causes of consumption to a process level, where optimization measures can actually take place. This dissertation proposes a new approach to tackle this issue, by on-line estimation of context-based energy consumption models, which are able to map operating context to consumption patterns. Context identification is performed by regression tree algorithms. Energy consumption estimation is achieved by means of a multi-model architecture using multiple RLS algorithms, locally estimated for each operating context. Lastly, the proposed approach is applied to a real cement plant grinding circuit. Experimental results prove the viability of the overall system, regarding both automatic context identification and energy consumption estimation.

Levantamento, identificação e classificação de dados para a gestão da manutenção numa empresa industrial

O presente trabalho refere-se à análise de conceitos gerais de manutenção e sua gestão, aplicados a uma indústria de produção de fibra têxtil sintética. Contempla uma primeira fase de organização e segmentação de um registo histórico de dados, para a identificação de equipamentos críticos e o seu impacto a nível capital na instalação industrial, e uma outra fase de caracterização de tipos de avaria comuns para a definição de um plano de acções. Neste contexto o trabalho visa o estudo de um equipamento essencial ao processo produtivo, pois a ocorrência de uma avaria/falha traduz-se na paragem da máquina e consequentemente perda na produção. Partindo dos dados organizados sobre avarias comuns identificam-se as causas raiz, com recurso a diagramas de causa e efeito. Acrescenta-se uma análise dos investimentos necessários para cumprir algumas das acções do plano. A estrutura de dados realizada permite à empresa dispor de uma nova ferramenta de apoio à gestão da manutenção, com vista a uma melhor preparação de trabalhos futuros e consequente aumento da produtividade.

O papel de Nikita Khrushchev no Complexo Militar e Industrial, no quadro da Guerra Fria

A presente dissertação visa aferir a dimensão e a relevância das alterações operadas por Nikita Khrushchev, enquanto líder da União Soviética, no Complexo Militar e Industrial deste país, no período da Guerra Fria. Neste contexto, as mesmas serão analisadas e proceder-se-á, paralelamente, ao estudo do impacto das mesmas a nível interno, bem como a nível externo, na interacção da União Soviética com os restantes actores da comunidade internacional, nomeadamente os Estados Unidos. Mormente, como forma de contextualizar as referidas alterações, proceder-se-á também ao apuramento dos motivos que estiveram subjacentes à transmutação de uma componente relevante nas Relações Internacionais, o Complexo Militar e Industrial Soviético.

Um olhar sobre a Descrição a partir das Séries " Licenciamento Industrial" e "Registo do Trabalho Nacional" da Direcção Regional de Economia do Centro

O presente trabalho resulta do estágio realizada na Secretaria Geral do Ministério da Economia e do Emprego. O estágio consistiu na descrição de duas Séries documentais. Com o presente trabalho pretende-se demonstrar a importância do uso das normas de descrição arquivística, mostrando a importância da descrição dos produtores, das funções e das entidades responsáveis pela sua custódia, conjugada com a descrição dos documentos.