Fiber functionalization for biomedical applications

Deep-eutectic solvents (DES) are considered novel renewable and biodegradable solvents, with a cheap and easy synthesis, without waste production. Later it was discovered a new subclass of DES that even can be biocompatible, since their synthesis uses primary metabolites such as amino acids, organic acids and sugars, from organisms. This subclass was named natural deep-eutectic solvents (NADES). Due to their properties it was tried to study the interaction between these solvents and biopolymers, in order to produce functionalized fibers for biomedical applications. In this way, fibers were produced by using the electrospinning technique. However, it was first necessary to study some physical properties of NADES, as well as the influence of water in their properties. It has been concluded that the water has a high influence on NADES properties, which can be seen on the results obtained from the rheology and viscosity studies. The fluid dynamics had changed, as well as the viscosity. Afterwards, it was tested the viability of using a starch blend. First it was tested the dissolution of these biopolymers into NADES, in order to study the viability of their application in electrospinning. However the results obtained were not satisfactory, since the starch polymers studied did not presented any dissolution in any NADES, or even in organic solvents. In this way it was changed the approach, and it was used other biocompatible polymers. Poly(ethylene oxide), poly(vinyl alcohol) and gelatin were the others biopolymers tested for the electrospinning, with NADES. All polymers show good results, since it was possible to obtain fibers. However for gelatin it was used only eutectic mixtures, containing active pharmaceutical ingredients (API’s), instead of NADES. For this case it was used mandelic acid (antimicrobial properties), choline chloride, ibuprofen (anti-inflammatory properties) and menthol (analgesic properties). The polymers and the produced fibers were characterized by scanning electron microscope (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). With the help of these techniques it was possible to conclude that it was possible to encapsulate NADES within the fibers. Rheology it was also study for poly(ethylene oxide) and poly(vinyl alcohol), in a way to understand the influence of polymer concentration, on the electrospinning technique. For the gelatin, among the characterization techniques, it was also performed cytotoxicity and drug release studies. The gelatin membranes did not show any toxicity for the cells, since their viability was maintained. Regarding the controlled release profile experiment no conclusion could be drawn from the experiments, due to the rapid and complete dissolution of the gelatin in the buffer solution. However it was possible to quantify the mixture of choline chloride with mandelic acid, allowing thus to complete, and confirm, the information already obtained for the others characterization technique.

Earthen plasters: the potential of the clayey soils of barrocal region in Algarve

Due to their high adsorption capacity of water vapor, earthen plasters can act as a moisture buffer, contributing to balance the relative humidity of the indoor environment of buildings. As a consequence of this capacity earthen plasters may also contribute to the perception of thermal comfort, since a high relative humidity increases the thermal conductivity of air and restricts skin evaporation, increasing the discomfort associated with the perception of heat or cold. Simultaneously, earthen plasters may also contribute to the indoor air quality. In one hand, by mitigating health problems of the respiratory system associated with indoor environment with high relative humidity, in which increases the risk of development of microorganisms usually responsible for infections, allergies or asthma. In the other hand, by mitigating the probability of inflammation of the respiratory system airways associated to exceedingly dry indoor environments. Therefore it also becomes expectable that earthen plasters may contribute for reducing the needs for air conditioning and mechanical ventilation in buildings and, thereby, also allowing the reduction of the associated energy consumption. The «Barrocal» region, located in the sedimentary basin of Algarve, South Portugal, presents geomorphological characteristics that promote the occurrence of soils with a clay mineralogy dominated by illite, which is a clay mineral characterized by a high adsorption capacity of water vapor and low expansibility. This fact turns expectable that these soils have a high potential for interior plastering. In order to evaluate this potential four mortars were formulated with an increasing content of clayey soil extracted from a selected clay quarry from «Barrocal» region. The results from the preliminary characterization campaign confirmed the reduced linear shrinkage of these mortars, as well as their high adsorption-desorption capacity, that is positively correlated with the content of clayey soil present in mortar formulation. However, the mechanical tests showed that the mechanical resistance of these mortars should be improved, for instance through the addition of natural fibers for reinforcement, which will be investigated in future research. This research contributed to increase certainty regarding the potential of clayey soils of the «Barrocal» sub-region of Algarve to produce mortars suitable for eco-efficient interior plastering.

Development of novel active pharmaceutical ionic liquids and salts based on antibiotics and anti-fungal drugs

Ionic Liquids (ILs) are class of compounds, which have become popular since the mid-1990s. Despite the fact that ILs are defined by one physical property (melting point), many of the potential applications are now related to their biological properties. The use of a drug as a liquid can avoid some problems related to polymorphism which can influence a drug´s solubility and thus its dosages. Also, the arrangement of the anion or cation with a specific drug might be relevant in order to: a) change the correspondent biopharmaceutical drug classification system; b) for the drug formulation process and c) the change the Active Pharmaceutical Ingredients’ (APIs). The main goal of this Thesis is the synthesis and study of physicochemical and biological properties of ILs as APIs from beta-lactam antibiotics (ampicillin, penicillin G and amoxicillin) and from the anti-fungal Amphotericin B. All the APIs used here were neutralized in a buffer appropriate hydroxide cations. The cation hydroxide was obtained on Amberlite resin (in the OH form) in order to exchange halides. The biological studies of these new compounds were made using techniques like the micro dilution and colorimetric methods. Overall a total of 19 new ILs were synthesised (6 ILs based on ampicillin, 4 ILs, based on amoxicillin, 6 ILs based on penicillin G and 4 ILs based on amphotericin B) and characterized by spectroscopic and analytical methods in order to confirm their structure and purity. The study of the biological properties of the synthesised ILs showed that some have antimicrobial activity against bacteria and yeast cells, even in resistant bacteria. Also this work allowed to show that ILs based on ampicillin could be used as anti-tumour agents. This proves that with a careful selection of the organic cation, it is possible to provoke important physico-chemical and biological alteration in the properties of ILs-APIs with great impact, having in mind their applications.

Control system for actuation and sensing in digital microfluidics devices

Digital Microfluidics (DMF) is a second generation technique, derived from the conventional microfluidics that instead of using continuous liquid fluxes, it uses only individual droplets driven by external electric signals. In this thesis a new DMF control/sensing system for visualization, droplet control (movement, dispensing, merging and splitting) and real time impedance measurement have been developed. The software for the proposed system was implemented in MATLAB with a graphical user interface. An Arduino was used as control board and dedicated circuits for voltage switching and contacts were designed and implemented in printed circuit boards. A high resolution camera was integrated for visualization. In our new approach, the DMF chips are driven by a dual-tone signal where the sum of two independent ac signals (one for droplet operations and the other for impedance sensing) is applied to the electrodes, and afterwards independently evaluated by a lock-in amplifier. With this new approach we were able to choose the appropriated amplitudes and frequencies for the different proposes (actuation and sensing). The measurements made were used to evaluate the real time droplet impedance enabling the knowledge of its position and velocity. This new approach opens new possibilities for impedance sensing and feedback control in DMF devices.

40 K Liquid Neon Energy Storage Unit

A thermal Energy Storage Unit (ESU) could be used to attenuate inherent temperature fluctuations of a cold finger, either from a cryocooler working or due to sudden income heat bursts. An ESU directly coupled to the cold source acts as a thermal buffer temporarily increasing its cooling capacity and providing a better thermal stability of the cold finger (“Power Booster mode”). The energy storage units presented here use an enthalpy reservoir based on the high latent heat of the liquid-vapour transition of neon in the temperature range 38 - 44 K to store up to 900 J, and that uses a 6 liters expansion volume at RT in order to work as a closed system. Experimental results in the power booster mode will be described: in this case, the liquid neon cell was directly coupled to the cold finger of the working cryocooler, its volume (12 cm3) allowing it to store 450 J at around 40 K. 10 W heat bursts were applied, leading to liquid evaporation, with quite reduced temperature changes. The liquid neon reservoir can also work as a temporary cold source to be used after stopping the cryocooler, allowing for a vibration-free environment. In this case the enthalpy reservoir implemented (24 cm3) was linked to the cryocooler cold finger through a gas gap heat switch for thermal coupling/decoupling of the cold finger. We will show that, by controlling the enthalpy reservoir’s pressure, 900 J can be stored at a constant temperature of 40 K as in a triple-point ESU.

Learning new tricks: Corticostriatal dynamics during novel skill learning

Learning novel actions and skills is a prevalent ability across multiple species and a critical feature for survival and competence in a constantly changing world. Novel actions are generated and learned through a process of trial and error, where an animal explores the environment around itself, generates multiple patterns of behavior and selects the ones that increase the likelihood of positive outcomes. Proper adaptation and execution of the selected behavior requires the coordination of several biomechanical features by the animal. Cortico-basal ganglia circuits and loops are critically involved in the acquisition, learning and consolidation of motor skills.(...)

Simulação de uma linha de produção com elevada variabilidade: uma abordagem Teoria das Restrições/DBR

A exigente corrida pela satisfação do cliente conduziu as organizações a uma generalizada aplicação de metodologias de melhoria contínua. Não obstante, frequentemente as expectativas não são correspondidas, levando ao insucesso destas aplicações. Para solucionar o problema vários autores defendem uma integração entre a Teoria das Restrições, Lean e Seis Sigma, denominada TLS. Ao invés de atacar, simultaneamente, todos os problemas do sistema, as equipas de melhoria devem focar-se nos elementos que impedem a organização de atingir o seu propósito. Nesta integração a Teoria das Restrições fornece o foco na restrição, ao passo que o Lean e Seis Sigma facultam as ferramentas necessárias à implementação da melhoria, através da redução de desperdícios e variação nos pontos de alavancagem do sistema. Na sua aplicação aos sistemas produtivos, o Drum-Buffer-Rope (DBR) é um mecanismo fundamental para lidar com a variabilidade e potenciar o Throughput do sistema. A presente dissertação é baseada na linha de produção da Fábrica de Transformadores Siemens do Sabugo. Recorreu-se à simulação para construir um modelo da linha de produção, identificar as restrições do sistema, verificar o impacto que a variabilidade tem no mesmo, dimensionar os seus recursos e simular as potenciais melhorias da aplicação do DBR. Para obter uma representação fiel do sistema real foi imprescindível observar o sistema, recolher dados correspondentes ao input no modelo e desenvolver uma análise criteriosa dos mesmos. Em linhas com elevada variabilidade decorrente de uma produção por encomenda, a análise do input ganha maior importância. Para tal foi proposta uma metodologia recorrendo a métodos de inferência estatística. Os resultados do estudo indicam as melhorias obtidas com a introdução do DBR na linha de produção e validam a simulação como poderosa ferramenta no apoio à tomada de decisão.

Desenvolvimento de aplicações de Sistemas de Informação Geográfica WEB para gestão de resíduos urbanos.

A gestão do território contribui para o desenvolvimento socioeconómico e para o alcance de necessidades coletivas. A gestão de recursos, por sua vez, é uma das vias para atingir tais propósitos, convocando agentes, entidades e serviços para a administração de um território. O crescimento social e económico e a expansão urbana das últimas décadas tiveram um impacto significativo no consumo de recursos e na decorrente produção de resíduos, fazendo da gestão dos mesmos um importante meio para a gestão de recursos, com contributo para a gestão do território. Neste contexto, surgem serviços de gestão de resíduos urbanos, que dependem de informação geográfica referente ao seu sistema e ao do ambiente territorial em que o mesmo se insere. Face ao dinamismo e às relações entre diversos fenómenos e elementos presentes no referido ambiente, o processo de gestão de resíduos urbanos torna-se um desafio cada vez mais exigente e heterogéneo, em matéria de decisão espacial. Por esse motivo, é indispensável possuir ferramentas que integrem vários dados e que possibilitem abordagens metodológicas orientadas para uma intervenção territorial mais realista. Para tal, existem diversos métodos e técnicas, assentes em Tecnologias de Informação e Comunicação, com uma considerável adesão a soluções de Sistemas de Informação Geográfica, dada a necessidade de manipular informação com carácter espacial referente à gestão de resíduos urbanos. No quadro atual da produção e da prestação de serviços através de rede digital, as plataformas Web desses Sistemas de Informação Geográfica constituem-se como um instrumento para gestão de resíduos. Considerando o exemplo do Gabinete de Estudos, Planeamento e Controlo, dos Serviços Intermunicipalizados de Águas e Resíduos dos Municípios de Loures e Odivelas, no presente Trabalho de Projeto, pretende-se avaliar a situação atual das metodologias e dos recursos tecnológicos que um serviço deste tipo possui, percebendo o contributo que aplicações de Sistemas de Informação Geográfica Web podem ter para a concretização da sua missão, na conjuntura atual da tecnologia, da informação e da comunicação na Administração Pública. Assim, o presente Trabalho de Projeto propõe também um modelo de desenvolvimento das referidas aplicações, assentes em Sistemas de Informação Geográfica Desktop e Web de código aberto, livres e gratuitos. As aplicações abarcam informação interna, referente ao sistema de resíduos urbanos, dos Serviços Intermunicipalizados de Águas e Resíduos dos Municípios de Loures e Odivelas, e informação externa diversa, referente ao seu território de intervenção. A integração e relação da informação interna e externa, com resultados nas aplicações, são apresentadas como possíveis meios de assistência aos procedimentos efetuados no Gabinete de Estudos, Planeamento e Controlo e à prestação efetiva do serviço de gestão de resíduos urbanos. Igualmente, é possível inferir a versatilidade, a aplicabilidade e o potencial de aplicações de Sistemas de Informação Geográfica, em diversas vertentes e escalas de gestão do território.

Banco BPI and the reimbursement of contingent convertible subordinated bonds (CoCos)

This case study focuses on the BPI’s recapitalization plan, its causes and the reasons for the early reimbursement of CoCos in June 2014. The need for a capital intervention and the subsequent subscription agreement with the Portuguese Government of €1 500 million Core Tier 1 instruments were the result of a temporary capital buffer for sovereign debt exposures imposed by the European Banking Authority. The capital increase, the positive earnings in 2012 and 2013, the improvements in the sovereign debt crisis, the implementation of Basel III, in addition to the public exchange offer and the conversion of deferred tax assets into tax credits are the main factors for concluding the entire recapitalization operation three years before the deadline.

Non-gyrator type active inductors

Modern CMOS radio frequency (RF) Receivers have enabled efficient and increasing applications. The main requirement is to have system in a single chip, in order to minimize area and cost. For the purpose it is required the development of inductorless circuits for the key blocks of an RF receiver. Examples of this key blocks are RC oscillators, RF band pass filters, and Low Noise Amplifiers. The present dissertation presents an inductorless wideband MOSFET-only RF Non-Gyrator Type of Active Inductors with low area, low cost, and very low power, capable of covering the whole WMTS, and ISM, band and intended for biomedical applications. The proposed circuit is based on a floating capacitor connected between two controlled current sources. The first current source, which is controlled by the circuit input voltage, has two objectives: supply current to the capacitor (

Using an LED as a sensor and visible light communication device in a smart illumination system

The need for more efficient illumination systems has led to the proliferation of Solid-State Lighting (SSL) systems, which offer optimized power consumption. SSL systems are comprised of LED devices which are intrinsically fast devices and permit very fast light modulation. This, along with the congestion of the radio frequency spectrum has paved the path for the emergence of Visible Light Communication (VLC) systems. VLC uses free space to convey information by using light modulation. Notwithstanding, as VLC systems proliferate and cost competitiveness ensues, there are two important aspects to be considered. State-of-the-art VLC implementations use power demanding PAs, and thus it is important to investigate if regular, existent Switched-Mode Power Supply (SMPS) circuits can be adapted for VLC use. A 28 W buck regulator was implemented using a off-the-shelf LED Driver integrated circuit, using both series and parallel dimming techniques. Results show that optical clock frequencies up to 500 kHz are achievable without any major modification besides adequate component sizing. The use of an LED as a sensor was investigated, in a short-range, low-data-rate perspective. Results show successful communication in an LED-to-LED configuration, with enhanced range when using LED strings as sensors. Besides, LEDs present spectral selective sensitivity, which makes them good contenders for a multi-colour LED-to-LED system, such as in the use of RGB displays and lamps. Ultimately, the present work shows evidence that LEDs can be used as a dual-purpose device, enabling not only illumination, but also bi-directional data communication.

Analysis and implementation of a multi-ratio switched capacitor DC-DC converter for a supercapacitor power supply

An energy harvesting system requires an energy storing device to store the energy retrieved from the surrounding environment. This can either be a rechargeable battery or a supercapcitor. Due to the limited lifetime of rechargeable batteries, they need to be periodically replaced. Therefore, a supercapacitor, which has ideally a limitless number of charge/discharge cycles can be used to store the energy; however, a voltage regulator is required to obtain a constant output voltage as the supercapacitor discharges. This can be implemented by a Switched-Capacitor DC-DC converter which allows a complete integration in CMOS technology, although it requires several topologies in order to obtain a high efficiency. This thesis presents the complete analysis of four different topologies in order to determine expressions that allow to design and determine the optimum input voltage ranges for each topology. To better understand the parasitic effects, the implementation of the capacitors and the non-ideal effect of the switches, in 130 nm technology, were carefully studied. With these two analysis a multi-ratio SC DC-DC converter was designed with an output power of 2 mW, maximum efficiency of 77%, and a maximum output ripple, in the steady state, of 23 mV; for an input voltage swing of 2.3 V to 0.85 V. This proposed converter has four operation states that perform the conversion ratios of 1/2, 2/3, 1/1 and 3/2 and its clock frequency is automatically adjusted to produce a stable output voltage of 1 V. These features are implemented through two distinct controller circuits that use asynchronous time machines (ASM) to dynamically adjust the clock frequency and to select the active state of the converter. All the theoretical expressions as well as the behaviour of the whole system was verified using electrical simulations.

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Proposta de implementação de cartas de controlo na gestão de projetos pela cadeia crítica

O risco de ocorrência de desvios significativos dos custos orçamentados e de incumprimento dos prazos de execução constituem duas das principais preocupações da gestão de projetos. A derrapa-gem de prazos de projetos é um dos motivos apontados para a falta de competitividade da indústria portuguesa (Tenera, 2012). Estes atrasos, para além de falta de competitividade, podem resultar ainda, por exemplo, em sanções financeiras e perda de confiança dos clientes. Goldratt, em 1997, alertou que as limitações das técnicas clássicas de planeamento e controlo pode-riam estar na origem do não cumprimento dos prazos dos projetos, propondo a aplicação da Teoria das Restrições à gestão de projetos, a Gestão de Projetos pela Cadeia Critica (Critical Chain Project Management - CCPM). A CCPM tem os seus princípios vocacionados para a gestão do tempo e introduz mudanças signifi-cativas na forma como os projetos são geridos, preconizando uma redução nas durações programadas das atividades, para contrariar tendências comportamentais humanas de atrasar a execução das tare-fas, introduzindo ainda estrategicamente reservas temporais agregadas, que procuram proteger o pro-jeto de derrapagens temporais. Um dos principais fatores de diferenciação da CCPM é precisamente a forma de monitorizar os projetos, sendo a Gestão das Reservas (Buffer Management - BM) o prin-cipal mecanismo de gestão do tempo de execução dos mesmos. No presente trabalho foi realizada uma revisão bibliográfica dos conceitos associados à gestão de riscos em geral e em particular à gestão de tempo em projetos, através da CCPM. Estudou-se ainda, a metodologia geral de implementação das cartas de controlo, com o objetivo de se desenvolver um modelo adaptado ao controlo de reservas temporais em projetos. Assim, e de acordo com o estudo realizado, foi proposto, desenvolvido e implementado um modelo, que complementa a gestão clássica de reservas temporais da CCPM com a utilização de cartas de controlo. O modelo proposto foi testado numa empreitada de reabilitação de edifícios, na Marinha Portuguesa, com o objetivo de se avaliar a sua aplicabilidade, as suas vantagens e limitações. No presente trabalho procurou-se propor e implementar um modelo robusto de gestão de reservas na CCPM, com aplicabilidade efetiva à gestão de riscos de derrapagem de prazos de projetos, não só na indústria da construção civil como em projetos de outras áreas. Com a aplicação do modelo proposto num caso de estudo, foi possível concluir o projeto dentro do prazo contratualizado, tendo-se verificado que a implementação de cartas de controlo na BM permi-tiu antecipar a deteção de consumos excessivos das reservas temporais do projeto.

Caracterização dos padrões de mortalidade e identificação dos pontos negros de mortalidade da fauna na A21

A monitorização da mortalidade da fauna nas estradas tem vindo a receber mais atenção no decorrer dos anos sendo uma temática em que ainda existe potencial para investigação assim como de propostas para medidas de mitigação. Em Portugal, os estudos mais desenvolvidos são geralmente realizados por concessionárias como a Infraestruturas de Portugal, a Brisa entre outras. Reconhece-se a importância desta temática devido aos impactes negativos a nível ecológico e ambiental resultantes da expansão da rede viária. Um fator agravante é a fraca sensibilidade dos condutores para a presença de animais na estrada e problemas devido às caraterísticas da estrada. Existem espécies que são atraídas para a estrada para se alimentarem da vegetação envolvente ou de cadáveres de outros animais, para realizarem a termorregulação ou por simplesmente precisarem de atravessar a estrada regularmente sendo por isso mais propícias a serem atingidas por veículos. A presença de animais na estrada pode acarretar riscos de acidentes assim como perdas humanas e financeiras. Deste modo, as concessionárias implementam estudos de monitorização da mortalidade da fauna nas estradas para perceberem os locais com maior número de atropelamentos, quais as espécies mais afetadas e assim conseguirem introduzir medidas de minimização que podem ser desde vedações a passagens próprias para a fauna. O objetivo deste trabalho consistiu na caracterização dos padrões de mortalidade e identificação dos pontos negros de mortalidade da fauna na autoestrada nº 21 (A21), bem como a sua relação com o habitat envolvente. Conclui-se que os animais mais afetados são os coelhos seguindo-se as cobras e as corujas e mochos. Através do buffer do habitat envolvente e do teste estatístico de Spearman não se conseguiu provar a influência do habitat envolvente sobre a mortalidade. Finalmente, foram propostas algumas medidas de minimização para os pontos negros identificados.